DK110 LCD Digital Panel Meters Specifications Installation and Operating Instructions 31/2 Digit LCD FEATURES }} }} }} }} }} }} Space saving design only 0.67"(17mm) deep Occupies less than 2.5 x 1.1 inches of front panel space High contrast LCD 31/2 digits with 0.39" LCD Snap-In bezel eliminates the need for mounting hardware Low power requirement (3mA) is ideal for battery powered applications }} User-selectable decimal points SPECIFICATIONS DISPLAY Digits: Type: Polarity: Decimal Points: Overrange: Hold: INPUTS Ranges: Configuration: Protection: Impedance: PERFORMANCE Accuracy: Conversion Rate: Normal Mode Rejection: Common Mode Range: Common Mode Rej.: Zero Adjustment: Warmup: Temperature Coeff.: ENVIRONMENT Operating Range: Storage Range: POWER SUPPLY Voltage: Current: MOUNTING CONNECTION ORDERING INFO PART NUMBER METER INPUT 3 1/2 digits (1999 counts) 0.39" (10mm) high contrast reflective LCD automatic, "-" displayed. 3 position, user-selectable three lower order digits blank for inputs >1999 & < -1999 display hold function is standard DK110.............................................................................................. 200mV 200.0 mV, 2.000 V, 20.00 VDC bipolar, differential 350 VDC, (100 VDC on 200 mV range) >1 M, (>10 M on 200 mV range) J1C10..............................................12" - 10 Pin Connector / Wire Assembly DK111.....................................................................................................2V DK112...................................................................................................20V ACCESSORIES C10-5................................................5" - 10 Pin Connector / Wire Assembly PW2-5........................................ Regulated 120V AC to 5V DC Power Supply CVC...............................................................................................Calibrator (0.1% +1 counts) typical (0.2% + 2 counts) maximum 3 per second >30 dB @ 60 Hz 1 VDC >86 dB automatic 10 minutes typical 100 ppm per C typical 0 to 50 C -10 to 70 C +5 VDC (5%) 3 mA snap-in bezel mount 10 pins, 0.025" square on 0.1" centers C-TON Industries * PO Box 11746 * Memphis, TN 38111 * USA (603) 471-0158 * email: info@ctonindustries.com LCD Digital Panel Meters Specifications Installation and Operating Instructions DK110 31/2 Digit LCD DIMENSIONS WIRING PIN +5V GND DP.C DP.1 DP.2 DP.3 IN (+) IN (-) NC HOLD C-TON Industries DESCRIPTION +5V DPM POWER SUPPLY DPM POWER SUPPLY GROUND DECIMAL POINT RETURN 1XX.X 1X.XX 1.XXXX POSITIVE INPUT SIGNAL NEGATIVE INPUT SIGNAL NO CONNECTION REQUIRED HOLD LAST DISPLAY * PO Box 11746 * Memphis, TN 38111 * USA (603) 471-0158 * email: info@ctonindustries.com