LCD Digital Panel Meters
FEATURES
SPECIFICATIONS ORDERING INFO
Specifications Installation and Operating Instructions
C-TON INdusTrIes
• PO Box 11746 • Memphis, TN 38111 • USA (603) 471-0158 •
emaIl: INfO@CTONINdusTrIes.COm
}}Space}saving}design}only}0.67”(17mm)}deep
}}Occupies}less}than}2.5}x}1.1}inches}of}front}panel}space
}}High}contrast}LCD
}}3½}digits}with}0.39”}LCD
}}Snap-In}bezel}eliminates}the}need}for}mounting}hardware}
}}Low}power}requirement}(3mA)}is}ideal}for}battery}powered}} }
} applications
}}User-selectable}decimal}points
DISPLAY
Digits: 3 ½ digits (±1999 counts)
Type: 0.39” (10mm) high contrast reflective LCD
Polarity: automatic, “-” displayed.
Decimal Points: 3 position, user-selectable
Overrange: three lower order digits blank for
inputs >1999 & < -1999
Hold: display hold function is standard
INPUTS
Ranges: ±200.0 mV, ±2.000 V, ±20.00 VDC
Configuration: bipolar, differential
Protection: ±350 VDC, (±100 VDC on 200 mV range)
Impedance: >1 MΩ, (>10 MΩ on 200 mV range)
PERFORMANCE
Accuracy: ±(0.1% +1 counts) typical
±(0.2% + 2 counts) maximum
Conversion Rate: 3 per second
Normal Mode Rejection: >30 dB @ 60 Hz
Common Mode Range: ±1 VDC
Common Mode Rej.: >86 dB
Zero Adjustment: automatic
Warmup: 10 minutes typical
Temperature Coeff.: ±100 ppm per °C typical
ENVIRONMENT
Operating Range: 0 to 50 °C
Storage Range: -10 to 70 °C
POWER SUPPLY
Voltage: +5 VDC (±5%)
Current: 3 mA
MOUNTING snap-in bezel mount
CONNECTION 10 pins, 0.025” square on 0.1” centers
3½ Digit LCD
PART NUMBER METER INPUT
DK110 ............................................................................................. 200mV
DK111 ....................................................................................................2V
DK112 ..................................................................................................20V
ACCESSORIES
C10-5 ............................................... 5" - 10 Pin Connector / Wire Assembly
J1C10 .............................................12" - 10 Pin Connector / Wire Assembly
PW2-5 ....................................... Regulated 120V AC to 5V DC Power Supply
CVC ..............................................................................................Calibrator
DK110
C-TON INdusTrIes
• PO Box 11746 • Memphis, TN 38111 • USA (603) 471-0158 •
emaIl: INfO@CTONINdusTrIes.COm
LCD Digital Panel Meters
C-TON INdusTrIes
• PO Box 11746 • Memphis, TN 38111 • USA (603) 471-0158 •
emaIl: INfO@CTONINdusTrIes.COm
Specifications Installation and Operating Instructions
3½ Digit LCD
DIMENSIONS
WIRING
PIN DESCRIPTION
+5V +5V DPM POWER SUPPLY
GND DPM POWER SUPPLY GROUND
DP.C DECIMAL POINT RETURN
DP.1 1XX.X
DP.2 1X.XX
DP.3 1.XXXX
IN (+) POSITIVE INPUT SIGNAL
IN (-) NEGATIVE INPUT SIGNAL
NC NO CONNECTION REQUIRED
HOLD HOLD LAST DISPLAY
DK110
