MNLM1596-X REV 0BL MILITARY DATA SHEET
Electrical Characteristics
DC PARAMETERS
(The following conditions apply to all the following parameters, unless otherwise specified.)
DC: V+ = 12V, V- = -8V, Vdiff = 0V, V(Sig+)=V(Sig-)=0V through 50 Ohms, V(Car+)=V(Car-)=6V through 50 Ohms.
SYMBOL PARAMETER CONDITIONS NOTES PIN-
NAME MIN MAX UNIT SUB-
GROUPS
Icc+ Positive Supply
Current 1, 2 3 mA 1, 2
1, 2 7 mA 3
Icc- Negative Supply
Current 1, 2 4 mA 1, 2
1, 2 7 mA 3
Iibs Input Bias
Current (Signal) Iibs+ + Iibs-/2 1, 2 25 uA 1
Iibc Input Bias
Current (Carrier) Iibc+ + Iibc-/2 1, 2 25 uA 1
1, 2 35 uA 2
1, 2 45 uA 3
Iiog Input Offset
Current (Gain
Adjust)
Through 10K to V+ 1, 2 -50 50 uA 1
Iios Input Offset
Current (Signal) 1, 2 -5 5 uA 1
Iioc Input Offset
Current (Carrier) 1, 2 -5 5 uA 1
1, 2 -8 8 uA 2
1, 2 -10 10 uA 3
Ioo Output Offset
Current 1, 2 -60 60 uA 1
1, 2 -120 120 uA 2, 3
+Av Voltage Gain V(Car+) - V(Car-) = 0.5V,
V(Sig+) - V(Sig-) = 0.15V 1, 2 2.5 V/V 4
-Av Voltage Gain V(Car+) - V(Car-) = -0.5V,
V(Sig+) - V(Sig-) = -0.15V 1, 2 2.5 V/V 4
+Vop Output Voltage
Swing V(Car+) - V(Car-) = 0.5V,
V(Sig+) - V(Sig-) = 4.0V 1, 2 5.0 Vp-p 4
-Vop Output Voltage
Swing V(Car+) - V(Car-) = -0.5V,
V(Sig+) - V(Sig-) = -4.0V 1, 2 5.0 Vp-p 4
DC PARAMETERS: DRIFT VALUES
(The following conditions apply to all the following parameters, unless otherwise specified.)
DC: V+ = 12V, V- = -8V, Vdiff = 0V, V(Sig+)=V(Sig-)=0V through 50 Ohms, V(Car+)=V(Car-)=6V through 50 Ohms.
"Deltas not required on B-Level product. Deltas required for S-Level product ONLY as specified on
Internal Processing Instructions (IPI)."
Icc+ Positive Supply
Current 1, 2 -0.45 0.45 mA 1
Icc- Negative Supply
Current 1, 2 -0.6 0.6 mA 1
Note 1: V(Car+ and V(Car-) are voltage at the carrier pins.
2