Product specifi cations in this catalog are subject to change without notice.Request our product specifi cations before purchase and/or use. Please use our products based on the information contained in this catalog and product specifi cations.
CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS
●Super low ESR, high ripple current capability
●ESR 5mΩmax. (2 to 4Vdc)
●Longer life (5,000 hours at 105℃)
●ESR after endurance is specified within the initial spec (2 to 4Vdc)
●Rated voltage range : 2 to 16Vdc
●RoHS Compliant
●Halogen Free
Lower ESR
PSF
PSE
Upgrade!
Radial Lead
(1/2)
Coated Case
L'
15min. 4min.
φD'
φd
Coated Case
L'
15min. 4min.
φD'
φd
F±0.5
F05, F08, H08
FA5, HB5, JB5
F±0.5
(FA5) (HB5, JB5)
F±0.5
◆SPECIFICATIONS
(at 20℃, 120Hz)
(at 105℃)
(at 20℃ after 2 minutes)
(at 20℃, 120Hz)
(at 100kHz)
Category
Temperature Range
Rated Voltage Range
Capacitance Tolerance
Surge Voltage
Leakage Current
*Note
Dissipation Factor
(tan
δ
)
Low Temperature
Characteristics
(Max.Impedance Ratio)
Endurance
Bias Humidity Test
Surge Voltage Test
Failure Rate
Items
-
55 to +105℃
2 to 16Vdc
±20% (M)
Rated voltage(V)×1.15
0.10 max.
Z(
-
25℃)/Z(+20℃)≦1.15
Z(
-
55℃)/Z(+20℃)≦1.25
The following specifications shall be satisfied when the capacitors are restored to 20℃ after the rated voltage is applied for 5,000 hours
at 105℃.
Appearance No significant damage
Capacitance change ≦± 20% of the initial value
D.F. (tan
δ)≦The initial specified value
ESR 2 to 4Vdc : ≦The initial specified value
16Vdc : ≦150% of the initial specified value
Leakage current ≦The initial specified value
The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjecting them to DC voltage at 60℃,
90 to 95% RH for 1,000 hours.
Appearance No significant damage
Capacitance change ≦± 20% of the initial value
D.F. (tan
δ)≦The initial specified value
ESR 2 to 4Vdc : ≦The initial specified value
16Vdc : ≦150% of the initial specified value
Leakage current ≦The initial specified value
The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltage specified at 105℃ for 30 seconds
through a protective resistor(R=1kΩ) and discharge for 5 minutes 30 seconds.
Appearance No significant damage
Capacitance change ≦± 20% of the initial value
D.F. (tan
δ)≦The initial specified value
ESR 2 to 4Vdc : ≦The initial specified value
16Vdc : ≦150% of the initial specified value
Leakage current ≦The initial specified value
0.5% per 1,000 hours maximum (Confidence level 60% at 105℃)
Characteristics
◆DIMENSIONS [mm]
◆MARKING
*Note : If any doubt arises, measure the leakage current after the following voltage treatment.
Voltage treatment : DC rated voltage is applied to the capacitors for 120 minutes at 105℃.
Size code
φ
D
φ
d
F
φ
D'
L'
F05
0.45
F08
6.3
0.6
2.5
FA5
0.5
L+0.3max.
H08
L+1.0max.
HB5
0.6
JB5
10.0
5.0
8.0
3.5
L+1.5max.L+1.0max.
φD+0.5max.
F
6D6
560
2.5V
EX) 2.5V560µF
●Terminal Code : E
PSFSeries
NPCAPTM -
CAT. No. E1001M
Shall not exceed values shown in STANDARD RATINGS.