ER1000FCT ER1006FCT 1 of 4 © 2006 Won-Top Electronics
Pb
ER1000FCT – ER1006FCT
10A GLASS PASSIVATED DUAL SUPERFAST RECTIFIER
Features
Glass Passivated Die Construction B
Super-Fast Switching
Low Forward Voltage Drop C
Low Reverse Leakage Current
High Surge Current Capability G A
Plastic Material has UL Flammability
Classification 94V-O PIN1 2 3
D
Mechanical Data F E
Case: ITO-220, Full Molded Plastic
Terminals: Plated Leads Solderable per P
MIL-STD-202, Method 208
Polarity: See Diagram I
Weight: 2.24 grams (approx.)
Mounting Position: Any H L
Mounting Torque: 11.5 cm-kg (10 in-lbs) Max.
Lead Free: For RoHS / Lead Free Version,
Add “-LF” Suffix to Part Number, See Page 4
PIN 1 - +
J PIN 3 - PIN 2
K
Maximum Ratings and Electrical Characteristics @TA=25°C unless otherwise specified
Single Phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
Characteristic Symbol ER
1000FCT ER
1001FCT ER
1001AFCT
ER
1002FCT ER
1003FCT ER
1004FCT ER
1006FCT Unit
Peak Repetitive Revers e Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
VRRM
VRWM
VR 50 100 150 200 300 400 600 V
RMS Reverse Voltage VR(RMS) 35 70 105 140 210 280 420 V
Average Rectified Output Current
@T
C = 100°C IO 10 A
Non-Repetiti ve Peak Forward Surge
Current 8.3ms Single half sine-wave
superimposed on rated load (JEDEC Method) IFSM 150 A
Forward Voltage @IF = 5.0A VFM 0.95 1.3 1.7 V
Peak Reverse Current @T
A = 25°C
At Rated DC Blocking Voltage @TA = 125° C IRM 10
400 µA
Reverse Recovery Time (Note 1) trr 35 50 nS
Typical Junction Capacitance (Note 2) Cj 70 50 pF
Operating and Storage Temperature Range Tj, TSTG -65 to +150 °C
Note: 1. Measured with IF = 0.5A, IR = 1.0A, IRR = 0.25A.
2. Measured at 1.0 MHz and applied reverse vol tage of 4.0V D. C.
WTE
POWER SEM IC ON DUC TOR S
ITO-220
Dim Min Max
A 14.60 15.40
B 9.70 10.30
C 2.55 2.85
D 2.70 3.30
E 13.00 13.80
F 0.50 0.75
G 3.00 Ø 3.50 Ø
H 6.30 6.90
I 4.20 4.80
J 2.50 2.90
K 0.50 0.75
L 2.70 3.15
P 2.29 2.79
All Dimensions in mm
ER1000FCT ER1006FCT 2 of 4 © 2006 Won-Top Electronics

30
60
90
0
120
150
180
1 10 100
I , PEAK FORWARD SURGE CURRENT (A)
FSM
NUMBER OF CYCLES AT 60Hz
Fig. 3 Max Non-Repetitive Surge Current
8.3 ms single half-sine-wave
JEDEC method
10
100
400
0.1 1.0 10 100
V , REVERSE VOLTAGE (V)
Fig. 4 Typical Junction Capacitance
R
1003 -1006
1000 -1002
C,CAPACITANCE(pF)
j
0
2
4
6
8
10
0 50 100 150
I,AVERAGEFORWARDCURRENT(A)
(AV)
T , CASE TEMPERATURE ( C)
Fig. 1 Forward Current Derating Curve
C°
0.1
1.0
10
100
0.2 0.6 1.0 1.4
I , INSTANTANEOUS FORWARD CURRENT (A)
F
V , INSTANTANEOUS FORWARD VOLTAGE (V)
Fig. 2 Typical Forward Characteristics
F
Pulse width = 300 s
2% duty cycle µ
1006
1003 - 1004
1000 -1002
ER1000FCT ER1006FCT 3 of 4 © 2006 Won-Top Electronics
MARKING INFORMATION
PACKAGING INFORMATION
Tube Size
L x W x H (mm) Quantity
(PCS) Inner Box Size
L x W x H (mm) Quantity
(PCS) Carton Size
L x W x H (mm) Quantity
(PCS) Approx. Gross Weight
(KG)
525 x 31 x 6 50 555 x 145 x 95 2,000 572 x 306 x 218 8,000 19.0
RECOMMENDED SCREW MOUNTING ARRANGEMENT
Note: 1. Anti-static tube, water clear color.
BULK
WTE = Manufacturer’s Logo
ER100xFCT = Device Number
x = 0, 1, 1A, 2, 3, 4 or 6
Polarity = As Marked on Body
Plain Washe
r
Rectifie
r
Heatsink
Conical Washe
r
6-32 HEX Nut
The full molded plastic package affords a
major reduction of hardware as compared
to a standard TO-220 package. However,
precautions should be made in mounting
procedure.
A conical washer should be used to apply
proper force to the device. Screw shoul d
not be tightened with any type of air-forced
torque or equipment that may cause crack
on device package.
A layer of thermal grease or thermal pad in
the interface will be considerably helpful for
heat dissipation.
6-32 HEX Head Scre
w
WTE
ER100xFCT
ER1000FCT ER1006FCT 4 of 4 © 2006 Won-Top Electronics
ORDERING INFORMATION
Product No. Package Type Shipping Quantity
ER1000FCT ITO-220 50 Units/Tube
ER1001FCT ITO-220 50 Units/Tube
ER1001AFCT ITO-220 50 Units/Tube
ER1002FCT ITO-220 50 Units/Tube
ER1003FCT ITO-220 50 Units/Tube
ER1004FCT ITO-220 50 Units/Tube
ER1006FCT ITO-220 50 Units/Tube
1. Shipping quantity given is for minimum packing quantity only. For minimum
order quantity, please consult the Sales Department.
2. To order RoHS / Lead Free version (with Lead Free finish), add “-LF” suffix
to p art number above. For example, ER1000FCT- LF.
Won-Top Electronics Co., Ltd (WTE) has checked all information carefully and believes it to be correct and accurate. However, WTE cannot assume any
responsibility for inaccuracies. Furthermore, this information does not give the purchaser of semiconductor devices any license under patent rights to
manufacturer . WTE reserves the right to change any or all information herein without further notice.
WARNING: DO NOT USE IN LIFE SUPPORT EQUIPMENT. WTE power semiconductor products are not authorized for use as critical components in life
support devices or systems without the express written approval.
We power your everyday.
Won-Top Electronics Co., Ltd.
No. 44 Yu Kang North 3rd Road, Chine Chen Dist., Kaohsiung, Taiwan
Phone: 886-7-822-5408 or 886-7-822-5410
Fax: 886-7-822-5417
Email: sales@wontop.com
Internet: http:// www.wontop. com