Robinson Nugent PC Boardmount Connectors and Sockets CPCI PAK-2 Connectors Compact PCI Connectors RN PAK-50 P25E and P50E Series 50 MIL IDC Sockets Two piece 2 mm 2 mm pin and receptacle connector system. Meets IEC61076-4-101 Level 11 requirements and IE917. UL and CSA approvals pending. Materials. Insulator: 20% GF plastic, color gray. Contacts: Copper alloy. Plating: 50 " nickel underplate; 30 " gold minimum in the mating area; 100 " minimum tin/lead on the terminal area. Current Rating: 1 A @ 70C. Female Socket, Right Angle, PCB Press Fit Terminals, Shielded Ground Stock No. Mfr.Os Type Fig. Positions/ Rows Type 906-3600 906-3610 906-3620 CP2-SA110-G1-TG30 CP2-SB110-G1-TG30 CP2-SB095-G1-TG30 1 2 2 110 (5 22) 110 (5 22) 95 (5 19) A B B EACH 1-24 25-49 7.87 7.87 6.35 6.56 6.56 5.29 Male Header, Straight, CBBBBBC Configuration, Ground Shield Stock No. Mfr.Os Type Fig. Signal Contacts Ground Contacts Type 906-3605 906-3615 906-3625 CP2-HA110-GA1-TG30 CP2-HB110-GA1-TG30 CP2-HB095-GA1-TG30 3 4 4 110 110 95 44 44 38 A B B EACH 1-24 25-49 6.30 5.91 5.45 5.26 4.94 4.54 Coding Keys EACH Stock No. Mfr.Os Type Fig. Color RAL No. 1-24 25-49 906-3630 906-3635 906-3640 906-3645 CP2-K1278CY-F CP2-K3456CY-M CP2-K2348BB-F CP2-K1567BB-M N 5 N 6 Cadmium Yellow Cadmium Yellow Brilliant Blue Brilliant Blue 1021 1021 5007 5007 .66 .66 .66 .66 .53 .53 .53 .53 CP Series Standard DIN Plug Connectors P25E sockets which accept 30 AWG, 25 mil. center flat cable and P50E sockets which accept 28 AWG, 50 mil. center flat cable are designed to mate with P50E Series board mount plugs, ordered separately on this page. Latching eject mechanism facilitates mating/ unmating. The P25E provides daisy chain capability. The P50E socket accommodates backward and forward capability in that standard 0.100" and 0.050" connectors can be used on one cable assembly. Redundant ribbon contact design provides lower insertion/withdrawal forces, lower contact resistance, high normal force and high wear resistance. Contacts are recessed and fully protected on three sides, minimizing pin deformation. Phosphor bronze contacts plated with gold over nickel on contact area, tin over nickel on terminal area. Contact Resistance: 30 m1/2. Current Rating: 0.5 A. Black, glass-filled nylon body, rated UL94V-0. Temperature Range: 55C to +105C. EACH Mfr.Os Type No. of Contacts A B C 1-99 100-499 906-3210 906-3214 906-3216 906-3230 906-3232 P25E-050S-TG P25E-080S-TG P25E-100S-TG P50E-080S-TG P50E-100S-TG 50 80 100 80 100 1.846 2.596 3.096 2.596 3.096 1.452 2.202 2.702 2.202 2.702 1.200 1.950 2.450 1.950 2.450 9.55 11.61 12.78 10.12 11.58 8.61 10.45 11.53 9.11 10.43 RN PAK-50 P50E Series Board Mount 50 MIL IDC Plugs Mate with P25E and P50E series IDC sockets, ordered separately on this page. Latching eject mechanism facilitates mating/unmating. Available in straight or right-angle termination styles. Redundant ribbon contact design provides lower insertion/withdrawal forces, lower contact resistance, high normal force and high wear resistance. Contacts are recessed and fully protected on three sides, minimizing pin deformation. Phosphor bronze contacts plated gold over nickel on contact area, tin over nickel on terminal area. Contact Resistance: 30 m1/2. Current Rating: 0.5 A. Black, glass-filled nylon body, rated UL94V-0. Temperature Range: 55C to +105C. 8 Straight Soldermount 0.118" Terminals Stock No. 906-3282 906-3288 906-3294 906-3296 DIN 41612 compatible plug designed for daughter board mounting. Features 3 row, 0.100" (2.54) grid that permits high density packaging. Retent clip secures connector during wave solder. Grey, thermoplastic glass-filled body. Copper alloy contacts. Termination Style/Tall Length: Solder, right angle/0.114" (2.90 mm). Plating: On contact area N 10 " min. Robex; On terminal area N 100 " tin; Nickel underplate N 50 ". Current Rating: 1 A @ 100C. PC Board Hole: 0.039 0.002". UL recognized, rated UL 94V-0. Dimensions (Inches) Stock No. Mfr.Os Type P50E-020P1-S1-TG P50E-040P1-S1-TG P50E-080P1-S1-TG P50E-100P1-S1-TG Dimensions (Inches) EACH No. of Contacts A B C 1-99 100-499 20 40 80 100 1.096 1.596 2.596 3.096 0.702 1.202 2.202 2.702 0.450 0.950 1.950 2.450 2.83 2.99 5.30 6.50 2.25 2.57 4.69 5.74 RN PAK-50 2-Piece 50-MIL Pitch Connectors Dimensions (Inches) EACH Stock No. Mfr.'s Type No. of Contacts/ Pin Arrangements A B C D 1-99 100-499 906-3180 906-3176 906-3178 DIN-48CPC-SR1-TR DIN-64CPB-SR1-TR DIN-96CPC-SR1-TR 48/Rows A, B, C 64/Rows A,C 96/Rows A, B, C 1.500 3.100 3.100 1.754 3.354 3.354 1.900 3.500 3.500 2.100 3.700 3.700 1.47 1.56 1.91 1.27 1.34 1.65 IDH-PK Series 4-Sided 0.025" (0.635) Square Post IDC Headers Four-sided body design provides foolproof socket polarization and pin protection. Mounting configurations include headers for straight (vertical) or right angle (horizontal) applications. MIL-C83503, DIN 41651 and BT-224 compatible. Allows convenient multiple sourcing. Phosphor bronze contacts plated with 10 " Robex on contact area and 100 " tin on terminal area over 50 " nickel. Temperature Range: 65C to +125C. Housed in black, glass-filled polyester, rated UL94V-O. All solder tails are rounded to 0.028" for easy PCB insertion. UL recognized, CSA certified. Order socket ejector latches separately below. Straight Solder Tail Stock No. Mfr.Os Type Contacts Dim. OAO 906-3100 906-3102 906-3104 906-3106 906-3108 906-3110 IDH-10PK-S3-TR IDH-20PK-S3-TR IDH-26PK-S3-TR IDH-34PK-S3-TR IDH-40PK-S3-TR IDH-50PK-S3-TR 10 20 26 34 40 50 1.260" (32.00) 1.760" (44.70) 2.060" (52.32) 2.460" (62.48) 2.760" (70.10) 3.260" (82.80) EACH 1-99 100-499 .53 .69 .74 .91 1.00 1.21 .46 .60 .64 .79 .87 1.05 Socket Ejector Latches for IDH-PK Series Headers Minimizes PC space required and allows dense packaging design. Stock No. Mfr.Os Type Description 906-3132 906-3134 EL-1K EL-2K 0.573" Tall Latch 0.430" Short Latch EACH 1-99 100-499 .11 .11 .08 .08 RN PAK-50 interconnect system features a redundant ribbon contact that provides lower insertion/withdrawal forces, lower contact resistance, high normal forces and high wear resistance. 3-dimensional mating versatilityhorizontal, vertical and parallel. Both male and female contacts are recessed and fully protected on 3 sides, minimizing pin deformation. Available in 20-100 pin positions. 0.118" long straight and right-angle soldered terminals with retention clip to eliminate hardware and secure connector during wave soldering. Phosphor bronze contacts plated with gold on contact area and tin on terminal area over nickel. Contact Resistance: 25 m1/2 maximum. Current Rating: 0.5 A/contact. Black, glass-filled nylon housing with flange, rated UL94V-0. Insulation Resistance: 1000 M1/2 minimum @ 500 VDC. Solder Terminal Straight Sockets Dimensions (Inches) EACH Stock No. Mfr.Os Type No. of Contacts A B C 1-99 100-499 906-3242 906-3244 906-3250 906-3254 906-3256 P50-020S-R1-TG P50-026S-R1-TG P50-050S-R1-TG P50-080S-R1-TG P50-100S-R1-TG 20 26 50 80 100 1.001 1.151 1.751 2.501 3.001 0.800 0.950 1.550 2.300 2.800 0.529 0.679 1.279 2.029 2.529 2.99 3.05 3.19 4.28 5.03 2.65 2.67 2.80 3.79 4.44 IDH-LP Series Low-Profile 0.025" (0.635) Square Post Headers c Robex Plating: Provides OBetter than GoldO Cycling and Environment Performance Designed for use where space saving is critical, these low profile headers provide mechanical polarization with full shrouding when mated with socket connectors that have center polarization tab. Available for straight or right angle applications. Phosphor bronze contacts plated with 10 " Robex on contact area and 100 " tin on terminal area over 50 " nickel. Temperature Range: 65C to +125C. Housed in black, glass-filled polyester, rated UL94V-O. Tall Length: 0.102" (2.59). All solder tails are rounded to 0.028" for easy 0.062" thick PCB insertion. UL recognized, CSA certified. Straight Solder Tail Stock No. 906-3060 906-3062 906-3064 906-3066 906-3068 906-3070 906-3072 906-3074 Mfr.Os Type IDH-10LP-S3-TR IDH-14LP-S3-TR IDH-16LP-S3-TR IDH-20LP-S3-TR IDH-26LP-S3-TR IDH-34LP-S3-TR IDH-40LP-S3-TR IDH-50LP-S3-TR Check Pricing And Availability Of All Items On The Internet At www.alliedelec.com Contacts Dim. OAO 10 14 16 20 26 34 40 50 0.800" (20.32) 1.000" (25.40) 1.100" (27.94) 1.300" (33.02) 1.600" (40.64) 2.000" (50.80) 2.300" (58.42) 2.800" (71.12) EACH 1-99 100-499 .45 .52 .96 .54 .62 .73 .95 1.12 .39 .45 .84 .46 .55 .64 .83 .97 ALLIED c 507