RN PAK-50¨P25E and P50E Series 50 MIL IDC Sockets
P25E sockets which
accept 30 AWG, 25 mil.
center flat cable and P50E
sockets which accept
28 AWG, 50 mil. center
flat cable are designed to
mate with P50E Series
board mount plugs,
ordered separately on this
page. Latching eject
mechanism facilitates
mating/ unmating. The P25E provides daisy chain capability. The P50E socket accommodates backward and forward
capability in that standard 0.100" and 0.050" connectors can be used on one cable assembly. Redundant ribbon contact
design provides lower insertion/withdrawal forces, lower contact resistance, high normal force and high wear resistance.
Contacts are recessed and fully protected on three sides, minimizing pin deformation. Phosphor bronze contacts plated
with gold over nickel on contact area, tin over nickel on terminal area. Contact Resistance: 30 m½. Current Rating: 0.5 A.
Black, glass-filled nylon body, rated UL94V-0. Temperature Range: Ð55¡C to +105¡C.
CPCI PAK-2¨Connectors Compact PCI Connectors
Robinson
Nugent
PC Boardmount Connectors and Sockets
CP Series Standard DIN Plug Connectors
DIN 41612 compatible plug designed for daughter board
mounting. Features 3 row, 0.100" (2.54) grid that permits high
density packaging. Retent clip secures connector during wave
solder. Grey, thermoplastic glass-filled body. Copper alloy
contacts. Termination Style/Tall Length: Solder, right
angle/0.114" (2.90 mm). Plating: On contact area Ñ 10 µ" min.
Robex
ª
; On terminal area Ñ 100 µ" tin; Nickel underplate Ñ
50 µ". Current Rating: 1 A @ 100¡C. PC Board Hole: 0.039
±0.002". UL recognized, rated UL 94V-0.
Stock Mfr.'s No. of Contacts/
No. Type Pin Arrangements
EACH
1-99 100-499
906-3180 DIN-48CPC-SR1-TR 48/Rows A, B, C 1.500 1.754 1.900 2.100 1.47 1.27
906-3176 DIN-64CPB-SR1-TR 64/Rows A,C 3.100 3.354 3.500 3.700 1.56 1.34
906-3178 DIN-96CPC-SR1-TR 96/Rows A, B, C 3.100 3.354 3.500 3.700 1.91 1.65
Stock Mfr.Õs No. of
No. Type Contacts
EACH
1-99 100-499
906-3282 P50E-020P1-S1-TG 20 1.096 0.702 0.450 2.83 2.25
906-3288 P50E-040P1-S1-TG 40 1.596 1.202 0.950 2.99 2.57
906-3294 P50E-080P1-S1-TG 80 2.596 2.202 1.950 5.30 4.69
906-3296 P50E-100P1-S1-TG 100 3.096 2.702 2.450 6.50 5.74
Stock Mfr.Õs No. of
No. Type Contacts
EACH
1-99 100-499
906-3210 P25E-050S-TG 50 1.846 1.452 1.200 9.55 8.61
906-3214 P25E-080S-TG 80 2.596 2.202 1.950 11.61 10.45
906-3216 P25E-100S-TG 100 3.096 2.702 2.450 12.78 11.53
906-3230 P50E-080S-TG 80 2.596 2.202 1.950 10.12 9.11
906-3232 P50E-100S-TG 100 3.096 2.702 2.450 11.58 10.43
Stock Mfr.Õs Positions/
Fig. Type
No. Type Rows
EACH
1-24 25-49
906-3600 CP2-SA110-G1-TG30 1 110 (5 ´22) A 7.87 6.56
906-3610 CP2-SB110-G1-TG30 2 110 (5 ´22) B 7.87 6.56
906-3620 CP2-SB095-G1-TG30 2 95 (5 ´19) B 6.35 5.29
Male Header, Straight, CBBBBBC Configuration, Ground Shield
RN PAK-50¨P50E Series Board Mount 50 MIL IDC Plugs
Mate with P25E and P50E series IDC sockets, ordered separately on this page.
Latching eject mechanism facilitates mating/unmating. Available in straight or
right-angle termination styles. Redundant ribbon contact design provides lower
insertion/withdrawal forces, lower contact resistance, high normal force and high
wear resistance. Contacts are recessed and fully protected on three sides,
minimizing pin deformation. Phosphor bronze contacts plated gold over nickel
on contact area, tin over nickel on terminal area. Contact Resistance: 30 m½.
Current Rating: 0.5 A. Black, glass-filled nylon body, rated UL94V-0. Temperature Range: Ð55¡C to +105¡C.
Straight Soldermount 0.118" Terminals
RN PAK-50¨2-Piece 50-MIL Pitch
Connectors
RN PAK-50
¨
interconnect system features a redundant ribbon contact that
provides lower insertion/withdrawal forces, lower contact resistance, high
normal forces and high wear resistance. 3-dimensional mating versatility-
horizontal, vertical and parallel. Both male and female contacts are recessed and fully protected on 3 sides, minimizing pin
deformation. Available in 20-100 pin positions. 0.118" long straight and right-angle soldered terminals with retention clip
to eliminate hardware and secure connector during wave soldering. Phosphor bronze contacts plated with gold on contact
area and tin on terminal area over nickel. Contact Resistance: 25 m½ maximum. Current Rating: 0.5 A/contact. Black,
glass-filled nylon housing with flange, rated UL94V-0. Insulation Resistance: 1000 M½ minimum @ 500 VDC.
Solder Terminal Straight Sockets
Stock Mfr.Õs No. of
No. Type Contacts
EACH
1-99 100-499
906-3242 P50-020S-R1-TG 20 1.001 0.800 0.529 2.99 2.65
906-3244 P50-026S-R1-TG 26 1.151 0.950 0.679 3.05 2.67
906-3250 P50-050S-R1-TG 50 1.751 1.550 1.279 3.19 2.80
906-3254 P50-080S-R1-TG 80 2.501 2.300 2.029 4.28 3.79
906-3256 P50-100S-R1-TG 100 3.001 2.800 2.529 5.03 4.44
Dimensions (Inches)
ABCD
Dimensions (Inches)
ABC
Dimensions (Inches)
ABC
Dimensions (Inches)
ABC
Two piece 2 mm ´2 mm pin and receptacle connector system. Meets IEC61076-4-101 Level 11 requirements and
IE917. UL and CSA approvals pending. Materials. Insulator: 20% GF plastic, color gray. Contacts: Copper alloy. Plating:
50 µ" nickel underplate; 30 µ" gold minimum in the mating area; 100 µ" minimum tin/lead on the terminal area. Current
Rating: 1 A @ 70¡C.
Female Socket, Right Angle, PCB Press Fit Terminals, Shielded Ground
Stock Mfr.Õs Signal Ground
Fig. Type
No. Type Contacts Contacts
EACH
1-24 25-49
906-3605 CP2-HA110-GA1-TG30 3 110 44 A 6.30 5.26
906-3615 CP2-HB110-GA1-TG30 4 110 44 B 5.91 4.94
906-3625 CP2-HB095-GA1-TG30 4 95 38 B 5.45 4.54
Coding Keys
Stock Mfr.Õs RAL
Fig. Color
No. Type No.
EACH
1-24 25-49
906-3630 CP2-K1278CY-F Ñ Cadmium Yellow 1021 .66 .53
906-3635 CP2-K3456CY-M 5 Cadmium Yellow 1021 .66 .53
906-3640 CP2-K2348BB-F Ñ Brilliant Blue 5007 .66 .53
906-3645 CP2-K1567BB-M 6 Brilliant Blue 5007 .66 .53
Stock Mfr.Õs Contacts Dim. ÒAÓ
No. Type
EACH
1-99 100-499
906-3060 IDH-10LP-S3-TR 10 0.800" (20.32) .45 .39
906-3062 IDH-14LP-S3-TR 14 1.000" (25.40) .52 .45
906-3064 IDH-16LP-S3-TR 16 1.100" (27.94) .96 .84
906-3066 IDH-20LP-S3-TR 20 1.300" (33.02) .54 .46
906-3068 IDH-26LP-S3-TR 26 1.600" (40.64) .62 .55
906-3070 IDH-34LP-S3-TR 34 2.000" (50.80) .73 .64
906-3072 IDH-40LP-S3-TR 40 2.300" (58.42) .95 .83
906-3074 IDH-50LP-S3-TR 50 2.800" (71.12) 1.12 .97
Stock Mfr.Õs Contacts Dim. ÒAÓ
No. Type
EACH
1-99 100-499
906-3100 IDH-10PK-S3-TR 10 1.260" (32.00) .53 .46
906-3102 IDH-20PK-S3-TR 20 1.760" (44.70) .69 .60
906-3104 IDH-26PK-S3-TR 26 2.060" (52.32) .74 .64
906-3106 IDH-34PK-S3-TR 34 2.460" (62.48) .91 .79
906-3108 IDH-40PK-S3-TR 40 2.760" (70.10) 1.00 .87
906-3110 IDH-50PK-S3-TR 50 3.260" (82.80) 1.21 1.05
Socket Ejector Latches for IDH-PK Series Headers
Minimizes PC space required and allows dense packaging design.
Stock Mfr.Õs Description
No. Type
EACH
1-99 100-499
906-3132 EL-1K 0.573" Tall Latch .11 .08
906-3134 EL-2K 0.430" Short Latch .11 .08
IDH-PK Series 4-Sided
0.025" (0.635) Square
Post IDC Headers
Four-sided body design provides foolproof socket
polarization and pin protection. Mounting configurations
include headers for straight (vertical) or right angle
(horizontal) applications. MIL-C83503, DIN 41651 and
BT-224 compatible. Allows convenient multiple sourcing.
Phosphor bronze contacts plated with 10 µ" Robex
ª
on
contact area and 100 µ" tin on terminal area over 50 µ" nickel.
Temperature Range: Ð65¡C to +125¡C. Housed in black, glass-filled polyester, rated UL94V-O. All solder tails are rounded
to 0.028" for easy PCB insertion. UL recognized, CSA certified. Order socket ejector latches separately below.
Straight Solder Tail
IDH-LP Series Low-Profile
0.025" (0.635) Square Post Headers
c
Robex
ª
Plating: Provides ÒBetter than GoldÓ Cycling and Environment
Performance
Designed for use where space saving is critical, these low profile headers provide
mechanical polarization with full shrouding when mated with socket connectors that
have center polarization tab. Available for straight or right angle applications.
Phosphor bronze contacts plated with 10 µ" Robex
ª
on contact area and 100 µ" tin
on terminal area over 50 µ" nickel. Temperature Range: Ð65¡C to +125¡C. Housed
in black, glass-filled polyester, rated UL94V-O. Tall Length: 0.102" (2.59). All solder
tails are rounded to 0.028" for easy 0.062" thick PCB insertion. UL recognized, CSA
certified.
Straight Solder Tail
Check Pricing And Availability Of All Items On The Internet At www.alliedelec.com ALLIED
c
507
8
