A Global Leader in the Design, Development, and
Manufacture of Sensor and Magnetic Components
Series Datasheet – HI Reed Relays www.standexmeder.com
HI Series
Reed Relays
Features: High Insulation Relay Coil/Contact 100 TOhm, High Leakage Distance
Applications: Test Systems, Control Systems, Medical Equipment, Measurement Equipment & Others
Markets: Medical, Test and Measurement & Others
Part
-Description: HI 00- 1 A 00
Nominal Voltage Contact QTY Contact Form Switch Model
05, 12 1 A 66, 75, 85
Customer
Options Switch Model Unit
Contact Data
66 75 85
Rated Power
(max.)
Any
DC combination of V&A not to exceed their individual max.’s 10 10 100 W
Switching Voltage
(max.)
DC or
peak AC 200 500 1,000 V
Switching Current
(max.)
DC
or peak AC 0.5 0.5 1.0 A
Carry Current
(max.)
DC
or peak AC 1 1 2.5 A
Contact Resistance
(max.)
@
0.5V & 50mA 150 200 150 mOhm
Breakdown
Voltage (min.)
According
to EN60255-5 0.25 1.0 3.0 kVDC
Operating
Time (max.)
Incl. Bounce; Measured with w/ Nominal Voltage
0.7 0.5 1.1 ms
Release Time (max.)
Measured
with no Coil Excitation 0.05 0.1 0.1 ms
Insulation
Resistance (typ.)
Rh<45
%, 100V Test Voltage 1012 1012 1013 Ohm
Capacitance
(typ.)
@
10kHz across open Switch 0.2 0.2 0.2 pF
Modifications in the sense of technical progress are reserved.
Version 01
27.01.2015
USA: +1.866.782.6339 │ salesusa@standexmeder.com
Europe: +49.7731.8399.0 │ info@standexmeder.com
Asia: +86.21.37820625 │ salesasia@standexmeder.com
A Global Leader in the Design, Development, and
Manufacture of Sensor and Magnetic Components
Series Datasheet – HI Reed Relays www.standexmeder.com
HI Reed Relay
Environmental
Data Unit
Shock Resistance (max.)
1/2 sine wave duration 11ms
50 g
Vibration
Resistance (max.) 20 g
Operating Temperature
-20 to 70 °C
Storage Temperature
-25 to 85 °C
Soldering
Temperature (max.)
5 sec. max.
260 °C
Life Test Data
*Load increase reduces life
expectancy of Reed Switches
Glossary
Contact Form
Form
A
NO = Normally Open Contacts
SPST = Single Pole Single
Throw
Form B
NC = Normally Closed
Contacts
SPST
= Single Pole Single Throw
Form C
Changeover
SPDT = Single Pole Double
Throw
Coil Data Coil Voltage
(nom.)
Coil Resistance
(typ.)
Pull-In Voltage
(max.)
Drop-Out Voltage
(min.)
Nominal Coil Power
(typ.)
Contact
Form
Switch
Model
Unit VDC Ohm VDC VDC mW
1A
66, 75*
05 600 3.5 0.75 42
12 3,000 8.4 1.8 48
1A 85 05 140 3.5 0.75 179
12 900 8.4 1.8 160
The Pull
-In / Drop-Out Voltage and Coil Resistance will change at rate of 0.4% per °C.
* 1A75
only available with Coil Voltage 05
Handling
& Assembly Instructions
Switching inductive and/or capacitive loads create voltage
and/or current peaks, which may damage the relay.
Protective circuits need to be used.
External magnetic fields needs to be taken into
consideration, including a too high packing density. This may
influence the relays’ electrical characteristics.
Mechanical shock impacts e.g. dropping the relays may cause
immediate or post-installation failure.
Wave soldering: maximum 260°/5 seconds.
Reflow soldering: Recommendations given by the soldering
paste manufacturer need to be considered as well as the
temperature limits of other components/processes.
Modifications in the sense of technical progress are reserved.
Version 01
27.01.2015
USA: +1.866.782.6339 │ salesusa@standexmeder.com
Europe: +49.7731.8399.0 │ info@standexmeder.com
Asia: +86.21.37820625 │ salesasia@standexmeder.com
A Global Leader in the Design, Development, and
Manufacture of Sensor and Magnetic Components
Series Datasheet – HI Reed Relays www.standexmeder.com
Pin Out
Top View
2.54mm [0.10“] pitch grid
Modifications in the sense of technical progress are reserved.
Version 01
27.01.2015
USA: +1.866.782.6339 │ salesusa@standexmeder.com
Europe: +49.7731.8399.0 │ info@standexmeder.com
Asia: +86.21.37820625 │ salesasia@standexmeder.com
