Noise Suppression Products/EMI Suppression Filters > For Automotive > Chip Ferrite Beads for Automotive Data Sheet For Automotive 1 Chip Ferrite Beads for Automotive BLM41P Series (1806 Size) Dimension Equivalent Circuit 1.60.2 0.70.3 4.50.2 1.60.2 (Resistance element becomes dominant at high frequencies.) (in mm) Packaging Code Packaging Minimum Quantity L 180mm Embossed Tape 2500 K 330mm Embossed Tape 8000 B Bulk(Bag) 1000 Rated Value (p: packaging code) Impedance (at 100MHz/20C) Impedance (at 1GHz/20C) Rated Current DC Resistance (max.) Operating Temperature Range Number of Circuits 60ohm(Typ.) - 6000mA 0.01ohm -55C to +125C 1 BLM41PG750SH1p 75ohm(Typ.) - 3000mA 0.025ohm -55C to +125C 1 BLM41PG181SH1p 180ohm25% - 3000mA 0.025ohm -55C to +125C 1 BLM41PG471SH1p 470ohm25% - 2000mA 0.05ohm -55C to +125C 1 BLM41PG102SH1p 1000ohm25% - 1500mA 0.09ohm -55C to +125C 1 Part Number BLM41PG600SH1p Continued on the following page. o This data sheet is applied for CHIP FERRITE BEAD used for Automotive Electronics equipment for your design. ! Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2006.3.9 http://www.murata.com/ Noise Suppression Products/EMI Suppression Filters > For Automotive > Chip Ferrite Beads for Automotive Data Sheet 2 Continued from the preceding page. Notice (Rating) In operating temperatures exceeding +85D, derating of current is necessary for chip Ferrite Beads for which rated current is 1500mA or over. Please apply the derating curve shown in chart according to the operating temperature. [Derating] 6 6A Derated Current [A] 5 4 3 4A 3A 2.5A 2 2A 1.5A 1.4A 1.2A 1 1A 0 85 125 Operating Temperature [D] Impedance-Frequency Characteristics Impedance-Frequency Characteristics BLM41PG600SH1 BLM41PG750SH1 100 100 Z 75 75 R Impedance () Impedance () Z R 50 X 25 50 X 25 0 0 1 10 100 1000 1 10 100 1000 Frequency (MHz) Frequency (MHz) Continued on the following page. o This data sheet is applied for CHIP FERRITE BEAD used for Automotive Electronics equipment for your design. ! Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2006.3.9 http://www.murata.com/ Noise Suppression Products/EMI Suppression Filters > For Automotive > Chip Ferrite Beads for Automotive Data Sheet 3 Continued from the preceding page. Impedance-Frequency Characteristics Impedance-Frequency Characteristics BLM41PG181SH1 BLM41PG471SH1 400 600 300 450 Impedance () Impedance () Z 200 Z R 300 R X 100 150 X 0 0 1 10 100 1000 1 Frequency (MHz) 10 100 1000 Frequency (MHz) Impedance-Frequency Characteristics BLM41PG102SH1 1200 900 Impedance () Z R 600 X 300 0 1 10 100 1000 Frequency (MHz) !Caution/Notice !Caution (Rating) Do not use products beyond the rated current and rated voltage as this may create excessive heat and deteriorate the insulation resistance. Notice Solderability of Tin plating termination chip might be deteriorated when low temperature soldering profile where peak solder temperature is below the Tin melting point is used. Please confirm the solderability of Tin plating termination chip before use. o This data sheet is applied for CHIP FERRITE BEAD used for Automotive Electronics equipment for your design. ! Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2006.3.9 http://www.murata.com/