© 2005 IXYS All rights reserved 1 - 2
0528
DSSS 30-01AR
IXYS reserves the right to change limits, test conditions and dimensions.
IFAV = 2x30 A
VRRM = 100 V
VF= 0.63 V
Symbol Conditions Maximum Ratings
IFRMS 70 A
IFAV TC = 155°C; rectangular, d = 0.5 30 A
IFAV TC = 155°C; rectangular, d = 0.5; per device 60 A
IFSM TVJ = 45°C; tp = 10 ms (50 Hz), sine 600 A
EAS IAS = 15 A; L = 100 µH; TVJ = 25°C; non repetitive 11.3 mJ
IAR VA =1.5 • VRRM typ.; f=10 kHz; repetitive 1.5 A
(dv/dt)cr 5000 V/µs
TVJ -55...+175 °C
TVJM 175 °C
Tstg -55...+150 °C
Ptot TC = 25°C 190 W
FCmounting force with clip 20...120 N
VISOL 50/60 Hz, RMS; t = 1 s 3000 V~
Weight typical 6 g
VRSM VRRM Type
V V
100 100 DSSS 30-01AR
Symbol Conditions Characteristic Values
typ. max.
IRVR= VRRM;T
VJ = 25°C 2 mA
VR= VRRM;T
VJ = 125°C 20 mA
VFIF = 30 A; TVJ = 125°C 0.63 V
IF = 30 A; TVJ = 25°C 0.79 V
IF = 60 A; TVJ = 125°C 0.78 V
RthJC 0.8 K/W
RthCH 0.25 K/W
Pulse test: Pulse Width = 5 ms, Duty Cycle < 2.0%
Data according to IEC 60747 and per diode unless otherwise specified
Power Schottky Rectifier
dual diode
Features
• International standard package
• Very low VF
• Extremely low switching losses
• Low IRM-values
• Isolated and UL registered E153432
Applications
• Rectifiers in switch mode power
supplies (SMPS)
• Free wheeling diode in low voltage
converters
Advantages
• High reliability circuit operation
• Low voltage peaks for reduced
protection circuits
• Low noise switching
• Low losses
Dimensions see Outlines.pdf
C = Cathode, A = Anode
ISOPLUS 247TM
A
C
A/C
Isolated
back surface *
A C/A C
http://store.iiic.cc/
© 2005 IXYS All rights reserved 2 - 2
0528
DSSS 30-01AR
IXYS reserves the right to change limits, test conditions and dimensions.
0.0 0.2 0.4 0.6 0.8 1.0
1
10
100
0 20406080
0.001
0.01
0.1
1
10
100
10 30 50 700 204060
0
10
20
30
40
50
60
1e-5 1e-4 1e-3 1e-2 1e-1 1e+0 1e+1
0.01
0.1
1
0 50 100 150
0
20
40
60
80
IF(AV)
TC
°C
IF(AV)
ts
K/W
10 100 1000 10000
100
1000
10000
IFSM
tP
A
0 20406080
100
1000
10000
CT
IR
IF
A
VFVRVR
V
pF
V
mA
P(AV)
W
ZthJC
V
A
s
DC
25°C
50°C
75°C
100°C
125°C
TVJ= 25°C
d = 0.5
d =
DC
0.5
0.33
0.25
0.17
0.08
Single Pulse
0.17
0.25
0.33
D = 0.5
TVJ=175°C
150°C
A
0.08
DSSS 30-01AR
TVJ =
175°C
150°C
125°C
25°C
Fig. 3 Typ. junction capacitance CT
vs. reverse voltage VR
Fig. 2 Typ. reverse current IR
versus reverse voltage
Fig. 1 Max. forward voltage
drop characteristics
Fig. 4 Avg. forward current IF(AV)
vs. case temperature TC
Fig. 5 Forward power loss characteristics
Note: All curves are per diode
Fig. 6 Transient thermal impedance junction to case at various duty cycles
http://store.iiic.cc/
