1N4001GP thru 1N4007GP www.vishay.com Vishay General Semiconductor Glass Passivated Junction Rectifier FEATURES * Superectifier application SUPERECTIFIER(R) structure for high reliability * Cavity-free glass-passivated junction * Low forward voltage drop * Low leakage current, typical IR less than 0.1 A * High forward surge capability DO-204AL (DO-41) * Meets environmental standard MIL-S-19500 * Solder dip 275 C max. 10 s, per JESD 22-B106 * AEC-Q101 qualified * Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 PRIMARY CHARACTERISTICS Package DO-204AL (DO-41) IF(AV) 1.0 A VRRM 50 V to 1000 V IFSM (8.3 ms sine-wave) 30 A IFSM (square wave tp = 1 ms) 45 A IR 5.0 A VF 1.1 V TJ max. 175 C Diode variation Single MECHANICAL DATA Case: DO-204AL, molded epoxy over glass body Molding compound meets UL 94 V-0 flammability rating Base P/N-E3 - RoHS compliant, commercial grade Base P/NHE3 - RoHS compliant, AEC-Q101 qualified Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD 22-B102 E3 suffix meets JESD 201 class 1A whisker test, HE3 suffix meets JESD 201 class 2 whisker test Polarity: Color band denotes cathode end TYPICAL APPLICATIONS Note * For part numbers with "E" suffix, they are"-E3" commercial grade only For use in general purpose rectification of power supplies, inverters, converters and freewheeling diodes for both consumer and automotive applications. MAXIMUM RATINGS (TA = 25 C unless otherwise noted) PARAMETER SYMBOL Maximum repetitive peak reverse voltage VRRM (1) 1N4001GP 1N4002GP 1N4003GP 1N4004GP 1N4005GP 1N4006GP 1N4007GP UNIT 50 100 200 400 600 800 35 70 140 280 420 50 100 200 400 600 Maximum RMS voltage VRMS Maximum DC blocking voltage VDC (1) Maximum average forward rectified current 0.375" (9.5 mm) lead length at TA = 75 C IF(AV) (1) 1.0 IFSM (1) 35 Non-repetitive peak forward surge current square waveform TA = 25 C (fig. 3) tp = 1 ms tp = 2 ms Rating for fusing (t < 8.3 ms) Operating junction and storage temperature range V 560 700 V 800 1000 V A 45 tp = 5 ms Maximum full load reverse current, full cycle average 0.375" (9.5 mm) lead length TA = 75 C 1000 A 30 IR(AV) (1) 30 A I2t (2) 3.7 A2s TJ, TSTG (1) - 65 to + 175 C Notes JEDEC registered values (2) For device using on bridge rectifier application (1) Revision: 28-May-13 Document Number: 88504 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 1N4001GP thru 1N4007GP www.vishay.com Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 C unless otherwise noted) PARAMETER TEST CONDITIONS Maximum instantaneous forward voltage 1.0 A Maximum DC reverse current at rated DC blocking voltage SYMBOL 1N4001GP 1N4002GP 1N4003GP 1N4004GP 1N4005GP 1N4006GP 1N4007GP UNIT VF 1.1 TA = 25 C V 5.0 IR (1) A TA = 125 C 50 Typical reverse recovery time IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A trr 2.0 s Typical junction capacitance 4.0 V, 1 MHz CJ 8.0 pF Note (1) JEDEC registered values THERMAL CHARACTERISTICS (TA = 25 C unless otherwise noted) PARAMETER SYMBOL 1N4001GP 1N4002GP 1N4003GP 1N4004GP 1N4005GP 1N4006GP 1N4007GP UNIT Typical thermal resistance RJA (1) 55 RJL (1) 25 C/ W Note (1) Thermal resistance from junction to ambient at 0.375" (9.5 mm) lead length, PCB mounted ORDERING INFORMATION (Example) PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE 1N4004GP-E3/54 0.335 54 5500 13" diameter paper tape and reel 1N4004GP-E3/73 0.335 73 3000 Ammo pack packaging 1N4004GPHE3/54 (1) 0.335 54 5500 13" diameter paper tape and reel 1N4004GPHE3/73 (1) 0.335 73 3000 Ammo pack packaging Note AEC-Q101 qualified (1) RATINGS AND CHARACTERISTICS CURVES (TA = 25 C unless otherwise noted) 30 Peak Forward Surge Current (A) Average Forward Rectified Current (A) 1.0 0.8 0.6 0.4 60 Hz Resistive or Inductive Load 0.375" (9.5 mm) Lead Length 0.2 0 TJ = TJ Max. 8.3 ms Single Half Sine-Wave 25 20 15 10 5 0 25 50 75 100 125 150 175 1 10 100 Ambient Temperature (C) Number of Cycles at 60 Hz Fig. 1 - Forward Current Derating Curve Fig. 2 - Maximum Non-repetitive Peak Forward Surge Current Revision: 28-May-13 Document Number: 88504 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 1N4001GP thru 1N4007GP www.vishay.com Vishay General Semiconductor 100 45 tp = 1 ms Junction Capacitance (pF) Peak Forward Surge Current (A) 50 40 35 tp = 2 ms 30 tp = 5 ms 25 tp 20 TJ = 25 C f = 1.0 MHz Vsig = 50 mVp-p 10 15 Square Waveform 10 25 50 75 100 1 0.1 125 10 100 Reverse Voltage (V) Fig. 3 - Non-Repetitive Peak Forward Surge Current Fig. 6 - Typical Junction Capacitance 100 Transient Thermal Impedance (C/W) 100 Instantaneous Forward Current (A) 1 Ambient Temperature (C) 10 1 TJ = 25 C Pulse Width = 300 s 1 % Duty Cycle 0.1 0.01 0.6 0.8 1.0 1.2 1.4 1.6 10 1 0.1 0.01 0.1 1 10 100 Instantaneous Forward Voltage (V) t - Pulse Duration (s) Fig. 4 - Typical Instantaneous Forward Characteristics Fig. 7 - Typical Transient Thermal Impedance Instantaneous Reverse Current (A) 10 TJ = 100 C 1 0.1 TJ = 25 C 0.01 0 20 40 60 80 100 Percent of Rated Peak Reverse Voltage (%) Fig. 5 - Typical Reverse Characteristics Revision: 28-May-13 Document Number: 88504 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 1N4001GP thru 1N4007GP www.vishay.com Vishay General Semiconductor PACKAGE OUTLINE DIMENSIONS in inches (millimeters) DO-204AL (DO-41) 1.0 (25.4) MIN. 0.107 (2.7) 0.080 (2.0) DIA. 0.205 (5.2) 0.160 (4.1) 1.0 (25.4) MIN. 0.034 (0.86) 0.028 (0.71) DIA. Note 0.026 (0.66) * Lead diameter is for suffix "E" part numbers 0.023 (0.58) Revision: 28-May-13 Document Number: 88504 4 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000