CV3 SMD Aluminum Electrolytic Capacitors
Features
‧
4 ~ 16φ, 85 , 2℃,000 hours assured
‧
Designed for surface mounting on high density PC board.
‧
RoHS Compliance
SPECIFICATIONS
Items Performance
Operating Temperature Range -40℃ ~ +85℃
Capacitance Tolerance ±20% (at 120Hz, 20 )℃
4 ~ 10φ I = 0.01CV or 3μA, whichever is greater, after 2 minutes at 20℃
6.3 ~ 100V 12.5 ~ 16φI = 0.03CV or 4μA, whichever is greater, after 2 minutes at 20℃
160 ~ 450V 12.5 ~ 16φI = 0.04CV + 100μA after 5 minutes at +20℃
Leakage Current (at 20℃)
Where I = leakage current C = rated capacitance in μF. V = rated DC working voltage in V.
Rated Voltage 6.3 10 16 25 35 50 63 100 160 ~ 250 400 ~ 450
4
~10φ 0.35 0.30 0.26 0.16 0.14 0.12 0.12 0.12 - -
12.5~16φ 0.38 0.34 0.30 0.26 0.22 0.18 0.14 0.10 0.20 0.25
Dissipation Factor
(Tanδat 120Hz, 20℃)
When the capacitance exceeds1,000μF , 0.02 shall be added every 1,000μF increase.
Impedance ratio shall not exceed the values given in the table below.
Rated Voltage 6.3 10 16 25 35 50 63 100 160 ~ 250 400 ~ 450
4 ~ 10φ 4432222 3 - -
Z(-25℃)
/Z(+20℃)12.5 ~ 16φ- 5 4 2 3 2 2 2 3 6
4 ~ 10φ 17 10 8 4 3 3 3 4 - -
Impedance
Ratio Z(-40℃)
/Z(+20℃)12.5 ~ 16φ- 12 10 5 4 3 3 3 6 10
Low Temperature
Characteristics (at 120Hz)
Test Time 2,000 Hrs
Capacitance Change Within ±20% of initial value
Dissipation Factor Less than 200% of specified value
Leakage Current Within specified value
Load Life Test
* The above specifications shall be satisfied when the capacitors are restored to 20℃after the rated voltage
applied for 2,000 hrs at 85℃.
Shelf Life Test Test time: 1,000 hrs; other items are the same as those for the load life test.
Other Standards JIS C 5101-1, -18
DIAGRAM OF DIMENSIONS
LEAD SPACING AND DIAMETER Unit: mm
φDL A B C W P±0.2 Fig. No.
4 5.3±0.2 4.3 4.3 2.0 0.5 to 0.8 1.0 1
5 5.3±0.2 5.3 5.3 2.3 0.5 to 0.8 1.5 1
6.3 5.3±0.2 6.6 6.6 2.7 0.5 to 0.8 2.0 1
6.3 7.7±0.3 6.6 6.6 2.7 0.5 to 0.8 2.0 1
8 10±0.5 8.4 8.4 3.0 0.7 to 1.1 3.1 1
8 10.3±0.5 8.4 8.4 3.0 0.7 to 1.1 3.1 1
10 10±0.5 10.4 10.4 3.3 0.7 to 1.1 4.7 1
10 10.3±0.5 10.4 10.4 3.3 0.7 to 1.1 4.7 1
12.5 13.5±0.5 12.8 12.8 4.9 1.1 to 1.4 4.2 2
12.5 16±0.5 12.8 12.8 4.9 1.1 to 1.4 4.2 2
16 16.5±0.5 16.3 16.3 5.8 1.1 to 1.4 6.0 2