3MTM Round, Jacketed, Flat Cable .050 28 AWG Stranded, Mass-Term, PVC/PVC 3759 Series * Round construction permits easier routing * 28 AWG wire on .050 inch centers permits mass termination to broad line of IDC connectors * Continuous bond and continuous split/bond allows for mass termination of IDC connectors * Available in continuous bond (non-split) wire for ease of cable fabrication * Meets external wiring requirements of National Electrical Code, Article 725 (CL2) * Primary cable is zippable for branching or discrete terminations * UL listed for USA and Canadian markets * RoHS* compliant Date Modified: November 15, 2006 TS-0070-22 Sheet 1 of 2 Physical Jacket Material: Polyvinyl Chloride (PVC); Color: Black Primary Material: PVC; Color: Gray Marking Standard: (UL) CL2 75C 28 AWG or AWM 20267 3M NU C AWM II A/B 80C 300V FT1 EU <50V Conductors: 28 AWG, 7 x 36 AWG [ 7 x o 0.217 ] Tinned Stranded Copper Inner Wrap: Polyester Film Electrical Voltage Rating: USA: N.E.C. 725, CL2 or AWM; 300V Insulation Resistance: Characteristic Impedance: Capacitance: Inductance: Propagation Delay: Velocity of Propagation: 1010 (Primary Cable)> 1 x Unbalanced 90 16.7 pF/ft [ 54.8 pF/m ] 0.13 H/ft [ 0.44 H/m ] 1.50 ns/ft [ 4.92 ns/m ] 68% Canada: 300V EU: <50V /10 ft. [ 3m ] Balanced 133 11.9 pF/ft [ 39.0 pF/m ] 0.21 /ft [ 0.69 /m ] 1.58 ns/ft [ 5.18 ns/m ] 64% Note:Unbalanced is measured between ground-signal-ground conductors. Balanced is measured between conductors within a pair. Environmental USA: CL2; 75C or AWM; -20C to + 80C Flammability Rating: USA: N.E.C. 725, CL2 Canada: FT1 Temperature Rating: Canada: 80C "RoHS compliant" means that the product or part does not contain any of the following substances in excess of the following maximum concentration values in any homogeneous material, unless the substance is in an application that is exempt under RoHS: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or prolybromianted diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M's knowledge and belief based upon information provided by third party suppliers to 3M. UL File No.: E118773, Power Limited Circuit Cable: CL2 (or AWM Style 20267) 3 Interconnect Solutions http://www.3M.com/interconnects/ 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3MTM Round, Jacketed, Flat Cable .050 28 AWG Stranded, Mass-Term, PVC/PVC Number of Conductors 3M Part Number Diameter A .03 Dimension B (See Note 2) 09 3759/09 0.26 [ 6.6 ] 0.40 [ 10.2 ] 10 3759/10 0.26 [ 6.6 ] 0.45 [ 11.4 ] 14 3759/14 0.27 [ 6.9 ] 0.65 [ 16.5 ] 15 3759/15 0.27 [ 6.9 ] 0.70 [ 17.8 ] 16 3759/16 0.27 [ 6.9 ] 0.75 [ 19.1 ] 20 3759/20 0.30 [ 7.6 ] 0.95 [ 24.1 ] 24 3759/24 0.33 [ 8.4 ] 1.15 [ 29.2 ] 25 3759/25 0.33 [ 8.4 ] 1.20 [ 30.5 ] 26 3759/26 0.33 [ 8.4 ] 1.25 [ 31.8 ] 30 3759/30 0.37 [ 9.4 ] 1.45 [ 36.8 ] 34 3759/34 0.37 [ 9.4 ] 1.65 [ 41.9 ] 36 3759/36 0.39 [ 9.9 ] 1.75 [ 44.5 ] 37 3759/37 0.39 [ 9.9 ] 1.80 [ 45.7 ] 40 3759/40 0.39 [ 9.9 ] 1.95 [ 49.5 ] 50 3759/50 0.44 [ 11.2 ] 2.45 [ 62.2 ] 60 3759/60 0.47 [ 11.9 ] 2.95 [ 74.9 ] 64 3759/64 0.50 [ 12.7 ] 3.15 [ 80.0 ] Inch [mm] Tolerance Unless Noted Inch .0 .00 .000 .1 .05 .010 3759 Series [ ] Dimensions for Reference only 2.4 Ref [ 61 ] Notes: 1. Red marking on one edge of primary cable designates wire #1. 2. Dimension B pertains to bonded area only. Bonded Split 1.0 Ref. [25] oA B Paper [ Mfgr. Option ] Polyester Film .026 Min [ 0.66 ] PVC Jacket .050 Typ [ 1.27 ] PVC Primary Insulation 28 AWG, 7 X 36 AWG [ 7 X o 0.127 ] Tinned Stranded Copper Conductors Ordering Information 3759/XX XX X00 XX Blank = Standard C = Canadian Certified Version Number of Conductors (See Table) Note: Contact 3M for availability of additional conductor counts and/or custom roll lengths. 3 Interconnect Solutions http://www.3M.com/interconnects/ Blank = Standard SF = Splice Free Length of Roll in Feet 100 = 100 ft Standard 300 = 300 ft Standard Blank = Continuous Split/Bonded Wire (Standard) SO = Continuously Bonded Wire (No Split) TS-0070-22 Sheet 2 of 2 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 Important Notice All statements, technical information, and recommendations related to 3M's products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M's current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M's option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted. 3 3M Electronics 6801 River Place Blvd. Austin, TX 78726-9000 800/225-5373 www.3M.com/electronics Minimum 10% Post-Consumer Fiber Printed in USA. (c) 3M 2006