SB007-03Q Ordering number : EN2939B SANYO Semiconductors DATA SHEET SB007-03Q Schottky Barrier Diode 30V, 70mA Rectifier Applications * High frequency rectification (switching regulators, converters, choppers) Features * * * * * Fast reverse recovery time (trr max=10ns) Low forward voltage (VF max=0.55V) Low switching noise Low leakage current and high reliability due to highly reliable planar structure Small-sized package permitting SB007-03Q applied sets to be compact and slim Specifications Absolute Maximum Ratings at Ta=25C Parameter Symbol Repetitive Peak Reverse Voltage Nonrepetitive Peak Reverse Surge Voltage Average Output Current Conditions Ratings VRRM VRSM Surge Forward Current IO IFSM Junction Temperature Storage Temperature 50Hz sine wave, 1 cycle A Tstg --55 to +125 C SB007-03Q-TL-E 0.2 0.425 mA C * Package : MCP * JEITA, JEDEC : SC-70, SOT-323 * Minimum Packing Quantity : 3,000 pcs./reel Packing Type: TL Marking 0 to 0.08 1.25 2.1 70 --55 to +125 Product & Package Information 0.15 V Tj unit : mm (typ) 7023A-005 3 V 35 2 Package Dimensions 2.0 Unit 30 LOT No. 2 0.65 0.9 LOT No. TL 0.3 Electrical Connection 0.3 0.425 G 1 1 : Anode 2 : No Contact 3 : Cathode 3 SANYO : MCP 1 2 http://semicon.sanyo.com/en/network 71812 TKIM/62098HA(KT)/D1096 GI/D288TA, TS No.2939-1/5 SB007-03Q Electrical Characteristics at Ta=25C Parameter Symbol Reverse Voltage Ratings Conditions min VR VF IR=20A IF=70mA Interterminal Capacitance IR C VR=15V VR=10V, f=1MHz Reverse Recovery Time trr IF=IR=10mA, See specified Test Circuit. Forward Voltage Reverse Current typ Unit max 30 V 0.55 V 5 A 3.0 pF 10 ns trr Test Circuit 100 10 10mA 50 1mA 10mA Duty10% 10s 5V trr Ordering Information Device Package Shipping memo MCP 3,000pcs./reel Pb Free SB007-03Q-TL-E IF -- VF 2 IR -- VR 1000 5 Reverse Current, IR -- A 7 5 3 5C 25C 2 10 Ta= 12 Forward Current, IF -- mA 100 7 5 3 2 5 100C 2 10 5 75C 2 1.0 50C 5 25C 2 0.1 5 1.0 2 0.01 7 5 0 0.2 0.4 0.6 0.8 1.0 Forward Voltage, VF -- V 1.2 0 5 10 15 Surge Forward Current, IFSM(Peak) -- A 10 7 5 3 2 1.0 7 5 3 25 30 35 ID00245 IFSM -- t 2.8 f=1MHz 20 Reverse Voltage, VR -- V ID00244 C -- VR 2 Interterminal Capacitance, C -- pF C Ta=125 2 100 Current waveform 50Hz sine wave 2.4 IS 20ms t 2.0 1.6 1.2 0.8 0.4 0 5 7 1.0 2 3 5 7 10 Reverse Voltage, VR -- V 2 3 5 ID00246 7 0.01 2 3 5 7 0.1 2 Time, t -- s 3 5 7 1.0 2 3 ID00247 No.2939-2/5 SB007-03Q Embossed Taping Specification SB007-03Q-TL-E No.2939-3/5 SB007-03Q Outline Drawing SB007-03Q-TL-E Land Pattern Example Mass (g) Unit 0.006 mm * For reference Unit: mm 2.1 1.0 0.7 0.65 0.65 No.2939-4/5 SB007-03Q Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to "standard application", intended for the use as general electronics equipment. The products mentioned herein shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee thereof. If you should intend to use our products for new introduction or other application different from current conditions on the usage of automotive device, communication device, office equipment, industrial equipment etc. , please consult with us about usage condition (temperature, operation time etc.) prior to the intended use. If there is no consultation or inquiry before the intended use, our customer shall be solely responsible for the use. Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer' s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer' s products or equipment. SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein. Regarding monolithic semiconductors, if you should intend to use this IC continuously under high temperature, high current, high voltage, or drastic temperature change, even if it is used within the range of absolute maximum ratings or operating conditions, there is a possibility of decrease reliability. Please contact us for a confirmation. SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures or malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise to smoke or fire, or accidents that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are controlled under any of applicable local export control laws and regulations, such products may require the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written consent of SANYO Semiconductor Co.,Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO Semiconductor Co.,Ltd. product that you intend to use. Upon using the technical information or products described herein, neither warranty nor license shall be granted with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any third party. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third party's intellectual property rights which has resulted from the use of the technical information and products mentioned above. This catalog provides information as of July, 2012. Specifications and information herein are subject to change without notice. PS No.2939-5/5