SPECIFICATION Main Internal Antenna Embedded Dielectric Penta-Band Antenna Part No. : 2JE03 2J s.r.o. Notes The contents of this data sheet are subject to change without notice. Please confirm the specifications and delivery conditions when placing your order. http://www.2j-antennae.com 1. SPECIFICATIONS 1.1. Electrical Specifications ITEM GSM850 GSM900 DCS PCS UMTS Frequency [MHz] 824~894 880~960 1710~1880 1850~1990 1920~2170 Notes :1) Peak Gain [dBi] 1.3 2.4 5.9 4.8 Notes :1) Eff.[%] @Min 42.4% 57.3% 84.0% 82.1% Notes :1) 6.4 80.7% Remark 3.0 : 1 max VSWR 3.5:1 Max @725~855MHz Notes :1) 3.0:1 Max @1510~2070MHz Notes :2) Polarization Linear Notes :1) Azimuth Beam Pattern Omni-directional Notes :1) Impedance 50 Notes :1) Notes:1) Measured on the matched EV test board. Notes:2) Measured on the matched manual. 1.2. Mechanical Specifications Electrode Silver - Dimensions (L x W x H) 24.0 x 5.5 x 4.4 mm Operating Temperature -35 ~ +85 1.3. Appearance and Dimensions Via(1.6) 1.4 Marking : Customer Model No. YY : Year ( ex: 2013 13 ) WW : Week ( ex: 1 week01, 7 week07) : st -2- th Feeding point MAIN CHIP ANTENNA 2. MEASUREMENT 2.1. SET for Measurement Board size: 114x45mm Antenna Radiation coordinate system 2.2. Electrical Characteristic S11(VSWR) Penta Band (GSM850&900, DCS, PCS, UMTS) - VSWR @ EV Board - - VSWR @ Manual Jig - -3- MAIN CHIP ANTENNA 2.3. Radiation Characteristic - Measurement Setup 6mx3mx3m Anechoic Chamber Matching on the standard test board (114 x 45mm) Temp. : 25 / Humidity : 50~55% - Measurement Result Band GSM850 GSM900 DCS PCS UMTS Frequency MHz] Ave. gain (dBi) Peak. Gain (dBi) Eff.(%) 824 -3.7 -0.3 42.4 849 -3.6 -0.2 43.8 869 -3.3 0.4 47.1 894 -2.5 1.3 56.1 880 -2.4 1.5 57.3 915 -1.9 2.2 64.6 925 -1.8 2.4 65.8 960 -2.3 1.8 58.2 1710 -0.4 6.4 90.9 1785 -0.9 5.8 80.7 1805 -0.6 6.1 86.2 1880 -1.1 5.4 76.8 1850 -0.8 5.6 84.0 1910 -0.5 5.9 89.8 1930 -0.5 5.8 88.6 1990 -0.6 5.5 86.7 1920 -0.7 4.8 84.9 1980 -0.9 4.5 82.1 2110 -0.5 4.6 89.5 2170 -0.2 4.5 95.4 -4- MAIN CHIP ANTENNA 3. SOLDERING RECOMMENDATIONS 3.1. Soldering Land Pattern A 25.0 B 5.5 C 2.3 D 20.4 E 1.8 F 1.9 3.2. Free Space Size Feeding Line No Ground L1 L2 C1 C2 Matching Circuit C1 (Series) 3.6pF C2 (Shunt) 1.8pF L1 (Shunt) 3.9nH L2 (Shunt) 2.7nH -5- MAIN CHIP ANTENNA 3.2. Soldering Profile Solder paste : Sn/Ag/Cu:96.5/3.0/0.5 This product is designed for reflow soldering only. Do not use flow (wave) soldering. Use non-activated flux (Cl content 0.2% max.) Follow the recommended soldering conditions to avoid damage. Reflow-cycle is max. 3 times. 4. Manual pattern tuning FR4 is used for this antenna. The frequency of the antenna is shifted by the tolerance of FR4 thickness and dielectric constant, so manual pattern tuning is needed for frequency matching. Before tuning After tuning Bottom side Manual tuning area Pattern cutting: Max 3.0 mm -6- MAIN CHIP ANTENNA 5. Radiation patterns GSM 850/900 H cut ( = 90) 0 10 DCS H cut ( = 90) 824 MHz 960 MHz 0 1710 MHz 1880 MHz 10 1710.000 0 0 -10 H plane 824.000000 MHz 300 60 300 -10 -20 -20 -30 -30 -40 -40 60 MHz 1880.000 960.000000 240 MHz 120 240 120 MHz 180 E1 cut (= 0) 0 180 824 MHz 960 MHz 0 10 10 0 0 -10 824.000000 MHz 300 60 300 -20 E1 plane E1 cut (= 0) 1710 MHz 1880 MHz 17 M -10 60 -20 -30 -30 -40 -40 18 M 120 240 960.000000 240 MHz 120 180 E2 cut (= 90) 180 824 MHz 960 MHz E2 cut (= 90) 0 0 10 10 0 0 -10 60 300 E2 plane 1710 MHz 1880 MHz 300 824.000000 MHz -10 -20 -20 -30 -30 -40 -40 120 240 240 180 60 960.000000 MHz 120 180 -7- MAIN CHIP ANTENNA PCS H cut ( = 90) 0 H cut ( = 90) 1850 MHz 1990 MHz 0 10 10 0 0 -10 -10 1850.000000 MHz 300 60 300 H plane UMTS -20 -20 -30 -30 -40 -40 120 180 E1 cut (= 0) 0 10 2170.000 MHz E1 cut (= 0) 1850 MHz 1990 MHz 0 1920 MHz 2170 MHz 10 0 -10 1850.000000 MHz 300 60 300 -10 -20 -20 -30 -30 -40 -40 120 240 E2 cut (= 90) 0 60 1990.000000 240 MHz 120 180 180 1850 MHz 1990 MHz E2 cut (= 90) 0 1920 MHz 2170 MHz 10 10 0 0 -10 300 60 300 1850.000000 MHz -20 -10 60 -20 -30 -30 E2 plane 1920.000 MHz 180 0 E1 plane 60 1990.000000 240 MHz 120 240 1920 MHz 2170 MHz -40 -40 120 240 1990.000000 MHz 120 240 180 180 -8- MAIN CHIP ANTENNA 1920 MHz 2170 MHz 6. PACKING 6.1 Tape Dimension (unit : mm) 6.1.1 Size P0 4.000.10 D0 B0 W S 40.40.10 F E P2 2.00 P1 12.00 Max 5 t KO A0 A0 5.80 0.20 E 1.75 0.10 B0 24.30 0.20 F 20.20 0.20 K0 4.60 0.20 W 44.00 0.30 D0 1.55 0.05 t 0.40 0.05 6.1.2 Surface resistance 1) Carrier tape : Max 1011 2) Cover tape : Max 1011 3) Reel : Max 1011 -9- MAIN CHIP ANTENNA 6.2 Description of Reel 6.2.1 Size WIDTH DIA HOLE ITEM Size(mm) DIA 330.0 2 WIDTH 45.5 0.5 CORE DIA CORE DIA 100.0 1 HOLE 13.0 0.3 6.2.2 Material 1) Plastic reel : GPPS (General Purpose Poly Styrene) resin 6.3 Description of Packing Box 6.3.1 Reel Size : 44 (W), Dia.330 (mm) Quantity : 1,000 ea/reel 6.3.2 Inner Box Size : 350 (W) x 345 (D) x 55 (T) (mm) Quantity : 1 reel (1,000 ea/reel x 1 reel = 1,000 ea) RoHS Compliance Label 6.3.2 Outer Box Size : 405 (W) x 360 (D) x 300 (T) (mm) Quantity : 5 Inner Box (1,000 ea/Inner Box x 5 Inner Box=5,000 ea) -10- MAIN CHIP ANTENNA