Product specifi cations in this catalog are subject to change without notice.Request our product specifi cations before purchase and/or use. Please use our products based on the information contained in this catalog and product specifi cations.
L' 15min. 4min.
φ
D'
φ
d
F
±
0.5
F
±
0.5
Vent
(Exceptφ
5 &φ
6.3)
Sleeve (PET : Dark blue)
●Adoption of innovative electrolyte and new technologies
●Endurance with ripple current : 2,000 to 8,000 hours at 105℃
●Solvent resistant type (see PRECAUTIONS AND GUIDELINES)
●RoHS Compliant
◆SPECIFICATIONS
(at 20℃, 120Hz)
(at 20℃, 120Hz)
(at 20℃ after 2 minutes)
(at 120Hz)
Category
Temperature Range
Rated Voltage Range
Capacitance Tolerance
Leakage Current
Dissipation Factor
(tan
δ
)
Low Temperature
Characteristics
(Max. Impedance Ratio)
Endurance
Shelf Life
Items
-
55 to +105℃
10 to 63Vdc
±20% (M)
I=0.01CV or 3µA, whichever is greater.
Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V)
Rated voltage (Vdc)
tan
δ
(Max.)
When nominal capacitance exceeds 1,000µF, add 0.02 to the value above for each 1,000µF increase.
Z(
-
55℃)/Z(+20℃)10Vdc to 50Vdc : 3max.
63Vdc : 6max.
The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated
ripple current is applied (the peak voltage shall not exceed the rated voltage) for the specified period of time at 105℃.
Time φ
5 & 6.3 : 2,000hours φ
8 : 3,000hours φ
10 : 5,000hours φ
12.5 : 7,000hours φ
16 & 18 : 8,000hours
Capacitance change ≦±20% of the initial value
D.F. (tan
δ
)
D.F. (tan
δ
)
≦200% of the initial specified value
Leakage current ≦The initial specified value
≦±20% of the initial value
≦200% of the initial specified value
≦The initial specified value
The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 105℃ without
voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4.
Capacitance change
Leakage current
Characteristics
10V
0.19
16V
0.16
25V
0.14
35V
0.12
50V
0.10
63V
0.10
◆DIMENSIONS [mm]
◆PART NUMBERING SYSTEM
5
0.5
2.0
φ
D
φ
d
F
φ
D'
L'
6.3
0.5
2.5
8
0.6
3.5
12.5
0.6
5.0
16
0.8
7.5
10
0.6
5.0
φ
D+0.5max.
L+1.5max.
(
φ
5 toφ
10) (
φ
12.5 toφ
16)
Gas escape end seal
Lower Z
Downsized
LXY
Lower Z
LXZ
LXV
◆RATED RIPPLE CURRENT MULTIPLIERS
●Frequency Multipliers
120
0.40
0.50
0.60
0.75
0.85
1k
0.75
0.85
0.87
0.90
0.95
10k
0.90
0.94
0.95
0.95
0.98
100k
1.00
1.00
1.00
1.00
1.00
Capacitance (
µ
F)
Frequency (Hz)
10 to 180
220 to 560
680 to 1,800
2,200 to 3,900
4,700 to 8,200
●Terminal Code : E
Supplement code
Size code
Capacitance tolerance code
Capacitance code (ex. 120µF:121, 2,200µF:222)
Lead forming·taping code
Terminal code
Voltage code (ex. 10V:100, 25V:250, 63V:630)
Series code
Category
E L X Y A A A EA A A A A A A A NM
1342 6 7 8 9 10 1312518171611 1514
Please refer to "Product code guide (radial lead type)"
The endurance of capacitors is reduced with internal heating produced by ripple
current at the rate of halving the lifetime with every 5℃ rise.
When long life performance is required in actual use, the rms ripple current has to
be reduced.
MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS
High reliability, Low impedance, 105℃
CAT. No. E1001L(1/2)