Data Sheet HIGH SPEED, EXTREMELY LOW NOISE LDO REGULATOR General Description Features The AP2120 series are positive voltage regulator ICs fabricated by CMOS process. Each of these ICs consists of a voltage reference, an error amplifier, a resistor network for setting output voltage, a current limit circuit for current protection. * * * * The AP2120 series feature high supply voltage ripple rejection, low dropout voltage, low noise, high output voltage accuracy, and low current consumption which make them ideal for use in various battery-powered devices. * * * * * The AP2120 series have 1.2V, 1.3V, 1.5V, 1.8V, 2.5V, 2.8V, 3.0V, 3.2V, 3.3V, 3.6V, 4.0V and 5.0V versions. * The AP2120 are available in standard SOT-23, SOT-89 and TO-92 packages. AP2120 Low Dropout Voltage at IOUT=100mA: 200mV Typical (Except 1.2V, 1.3V and 1.5V Versions) Low Quiescent Current: 25A Typical High Ripple Rejection: 65dB Typical f=1kHz Output Current: More Than 150mA (250mA Limit) Extremely Low Noise: 15Vrms@VOUT=1.2V, 1.3V, 1.5V (10Hz to 100kHz) Excellent Line Regulation: 4mV Typical Excellent Load Regulation: 12mV Typical High Output Voltage Accuracy: 2% Excellent Line Transient Response and Load Transient Response Compatible with Low ESR Ceramic Capacitor (as Low as 1F) Applications * * * * * * SOT-23 SOT-89 Mobile Phones, Cordless Phones Wireless Communication Equipment Portable Games Cameras, Video Recorders Sub-board Power Supplies for Telecom Equipment Battery Powered Equipment TO-92 (Bulk Packing) TO-92 (Ammo Packing) Figure 1. Package Types of AP2120 Nov. 2012 Rev. 1. 2 BCD Semiconductor Manufacturing Limited 1 Data Sheet HIGH SPEED, EXTREMELY LOW NOISE LDO REGULATOR AP2120 Pin Configuration N/NA Package R Package (SOT-89) (SOT-23) N NA VIN GND 3 3 2 1 2 1 GND VOUT VIN VOUT Z Package (TO-92 (Bulk Packing)) 1 2 3 GND VIN VOUT Z Package (TO-92 (Ammo Packing)) 3 VOUT 3 VOUT 2 VIN 2 VIN 1 GND 1 GND Figure 2. Pin Configuration of AP2120 (Top View) Pin Description Pin Number Pin Name Function SOT-23 (N) SOT-23 (NA) SOT-89/ TO-92 1 3 1 GND Ground 2 2 3 VOUT Regulated Output Voltage 3 1 2 VIN Nov. 2012 Rev. 1. 2 Input Voltage BCD Semiconductor Manufacturing Limited 2 Data Sheet HIGH SPEED, EXTREMELY LOW NOISE LDO REGULATOR AP2120 Functional Block Diagram VIN 2(2){3} 3(1){2} VOUT VREF CURRENT LIMIT 1(3){1} GND A(B){C} A for SOT-23 (N) B for SOT-23 (NA) C for SOT-89/TO-92 Figure 3. Functional Block Diagram of AP2120 Nov. 2012 Rev. 1. 2 BCD Semiconductor Manufacturing Limited 3 Data Sheet HIGH SPEED, EXTREMELY LOW NOISE LDO REGULATOR AP2120 Ordering Information AP2120 G1: Green Circuit Type TR: Tape and Reel or Ammo Blank: Bulk 1.2: 1.3: 1.5: 1.8: 2.5: 2.8: 3.0: 3.2: 3.3: 3.6: 4.0: 5.0: Package N/NA: SOT-23 R: SOT-89 Z: TO-92 Package SOT-23 Temperature Range -40 to 85oC Output Voltage SOT-89 -40 to 85oC -40 to 85oC Marking ID Packing Type 1.2V(N) AP2120N-1.2TRG1 GR4 Tape & Reel 1.3V(N) AP2120N-1.3TRG1 GR5 Tape & Reel 1.5V(N) AP2120N-1.5TRG1 GR6 Tape & Reel 1.8V(N) AP2120N-1.8TRG1 GR7 Tape & Reel 2.5V(N) AP2120N-2.5TRG1 GR8 Tape & Reel 2.8V(N) AP2120N-2.8TRG1 GR9 Tape & Reel 3.0V(N) AP2120N-3.0TRG1 GS2 Tape & Reel 3.2V(N) AP2120N-3.2TRG1 GS3 Tape & Reel 3.3V(N) AP2120N-3.3TRG1 GS4 Tape & Reel 3.6V(N) AP2120N-3.6TRG1 GZ8 Tape & Reel 4.0V(N) AP2120N-4.0TRG1 GZ9 Tape & Reel 5.0V(N) SOT-23 Part Number Fixed Output 1.2V Fixed Output 1.3V Fixed Output 1.5V Fixed Output 1.8V Fixed Output 2.5V Fixed Output 2.8V Fixed Output 3.0V Fixed Output 3.2V Fixed Output 3.3V Fixed Output 3.6V Fixed Output 4.0V Fixed Output 5.0V AP2120N-5.0TRG1 GS5 Tape & Reel 3.3V(NA) AP2120NA-3.3TRG1 GZ1 Tape & Reel 3.6V(NA) AP2120NA-3.6TRG1 GAA Tape & Reel 4.0V(NA) AP2120NA-4.0TRG1 GBA Tape & Reel 1.2V AP2120R-1.2TRG1 G13Q Tape & Reel 1.3V AP2120R-1.3TRG1 G17Q Tape & Reel 1.5V AP2120R-1.5TRG1 G22Q Tape & Reel 1.8V AP2120R-1.8TRG1 G27Q Tape & Reel Nov. 2012 Rev. 1. 2 BCD Semiconductor Manufacturing Limited 4 Data Sheet HIGH SPEED, EXTREMELY LOW NOISE LDO REGULATOR AP2120 Ordering Information (Continued) Package SOT-89 TO-92 Temperature Range -40 to 85oC -40 to 85oC Output Voltage Part Number Marking ID Packing Type 2.5V AP2120R-2.5TRG1 G28Q Tape & Reel 2.8V AP2120R-2.8TRG1 G31Q Tape & Reel 3.0V AP2120R-3.0TRG1 G33Q Tape & Reel 3.2V AP2120R-3.2TRG1 G37Q Tape & Reel 3.3V AP2120R-3.3TRG1 G41Q Tape & Reel 3.6V AP2120R-3.6TRG1 G42Q Tape & Reel 4.0V AP2120R-4.0TRG1 G43Q Tape & Reel 5.0V AP2120R-5.0TRG1 G70Q Tape & Reel 1.2V AP2120Z-1.2G1 2120Z-1.2G1 Bulk 1.2V AP2120Z-1.2TRG1 2120Z-1.2G1 Ammo 1.3V AP2120Z-1.3G1 2120Z-1.3G1 Bulk 1.3V AP2120Z-1.3TRG1 2120Z-1.3G1 Ammo 1.5V AP2120Z-1.5G1 2120Z-1.5G1 Bulk 1.5V AP2120Z-1.5TRG1 2120Z-1.5G1 Ammo 1.8V AP2120Z-1.8G1 2120Z-1.8G1 Bulk 1.8V AP2120Z-1.8TRG1 2120Z-1.8G1 Ammo 2.5V AP2120Z-2.5G1 2120Z-2.5G1 Bulk 2.5V AP2120Z-2.5TRG1 2120Z-2.5G1 Ammo 2.8V AP2120Z-2.8G1 2120Z-2.8G1 Bulk 2.8V AP2120Z-2.8TRG1 2120Z-2.8G1 Ammo 3.0V AP2120Z-3.0G1 2120Z-3.0G1 Bulk 3.0V AP2120Z-3.0TRG1 2120Z-3.0G1 Ammo 3.2V AP2120Z-3.2G1 2120Z-3.2G1 Bulk 3.2V AP2120Z-3.2TRG1 2120Z-3.2G1 Ammo 3.3V AP2120Z-3.3G1 2120Z-3.3G1 Bulk 3.3V AP2120Z-3.3TRG1 2120Z-3.3G1 Ammo 3.6V AP2120Z-3.6G1 2120Z-3.6G1 Bulk 3.6V AP2120Z-3.6TRG1 2120Z-3.6G1 Ammo 4.0V AP2120Z-4.0G1 2120Z-4.0G1 Bulk 4.0V AP2120Z-4.0TRG1 2120Z-4.0G1 Ammo 5.0V AP2120Z-5.0G1 2120Z-5.0G1 Bulk 5.0V AP2120Z-5.0TRG1 2120Z-5.0G1 Ammo BCD Semiconductor's products, as designated with "G1" suffix in the part number, are RoHS compliant and Green. BCD Semiconductor Manufacturing Limited Nov. 2012 Rev. 1. 2 5 Data Sheet HIGH SPEED, EXTREMELY LOW NOISE LDO REGULATOR AP2120 Absolute Maximum Ratings (Note 1) Parameter Symbol Value Unit Input Voltage VIN 6.5 V Enable Input Voltage VCE -0.3 to VIN+0.3 V Output Current IOUT 300 mA TJ 150 oC TSTG -65 to 150 oC TLEAD 260 Junction Temperature Storage Temperature Range Lead Temperature (Soldering, 10sec) JA Thermal Resistance (Note 2) o C SOT-23 250 SOT-89 165 TO-92 180 oC/W ESD (Human Body Model) ESD 2000 V ESD (Machine Model) ESD 200 V Note 1: Stresses greater than those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "Recommended Operating Conditions" is not implied. Exposure to "Absolute Maximum Ratings" for extended periods may affect device reliability. Note 2: Absolute maximum ratings indicate limits beyond which damage to the component may occur. Electrical specifications do not apply when operating the device outside of its operating ratings. The maximum allowable power dissipation is a function of the maximum junction temperature, TJ(max), the junction-to-ambient thermal resistance, JA, and the ambient temperature, TA. The maximum allowable power dissipation at any ambient temperature is calculated using: PD(max)=(TJ(max) TA)/JA. Exceeding the maximum allowable power dissipation will result in excessive die temperature. Recommended Operating Conditions Parameter Symbol Min Max Unit Input Voltage VIN 2 6 V TJ -40 85 oC Operating Junction Temperature Range Nov. 2012 Rev. 1. 2 BCD Semiconductor Manufacturing Limited 6 Data Sheet HIGH SPEED, EXTREMELY LOW NOISE LDO REGULATOR AP2120 Electrical Characteristics AP2120-1.2 Electrical Characteristics (VIN=2.2V, TJ=25oC, CIN=1F, COUT=1F, Bold typeface applies over -40oCTJ85oC, unless otherwise specified.) Parameter Output Voltage Symbol VOUT Input Voltage VIN Output Current IOUT Conditions VIN=2.2V 1mAIOUT30mA VIN-VOUT=1V Min Typ Max Unit 1.176 1.2 1.224 V 6 V 150 mA Load Regulation VRLOAD VIN=2.2V 1mAIOUT80mA 12 40 mV Line Regulation VRLINE 2.2VVIN6V IOUT=30mA 4 16 mV IOUT=10mA 700 900 IOUT=100mA 700 900 IOUT=150mA 700 900 IOUT=200mA 700 900 VIN=2.2V, IOUT=0mA 25 50 Ripple 0.5Vp-p, f=1kHz VIN=2.2V 65 dB 120 V/oC 100 ppm/oC Dropout Voltage Quiescent Current Power Supply Rejection Ratio Output Voltage Temperature Coefficient VDROP IQ PSRR VOUT/T (VOUT/VOUT)/T IOUT=30mA mV A Short Current Limit ILIMIT VOUT=0V 50 mA RMS Output Noise VNOISE TA=25oC, IOUT=0 10Hz f100kHz 15 Vrms BCD Semiconductor Manufacturing Limited Nov. 2012 Rev. 1. 2 7 Data Sheet HIGH SPEED, EXTREMELY LOW NOISE LDO REGULATOR AP2120 Electrical Characteristics (Continued) AP2120-1.3 Electrical Characteristics (VIN=2.3V, TJ=25oC, CIN=1F, COUT=1F, Bold typeface applies over -40oCTJ85oC, unless otherwise specified.) Parameter Output Voltage Symbol VOUT Input Voltage VIN Output Current IOUT Conditions VIN=2.3V 1mAIOUT30mA VIN-VOUT=1V Min Typ Max Unit 1.274 1.3 1.326 V 6 V 150 mA Load Regulation VRLOAD VIN=2.3V 1mAIOUT80mA 12 40 mV Line Regulation VRLINE 2.3VVIN6V IOUT=30mA 4 16 mV Dropout Voltage Quiescent Current Power Supply Rejection Ratio Output Voltage Temperature Coefficient VDROP IQ PSRR VOUT/T (VOUT/VOUT)/T IOUT=10mA 600 800 IOUT=100mA 600 800 IOUT=150mA 600 800 IOUT=200mA 600 800 VIN=2.3V, IOUT=0mA 25 50 Ripple 0.5Vp-p, f=1kHz VIN=2.3V 65 dB 130 V/oC 100 ppm/oC IOUT=30mA mV A Short Current Limit ILIMIT VOUT=0V 50 mA RMS Output Noise VNOISE TA=25oC, IOUT=0 10Hz f100kHz 15 Vrms Nov. 2012 Rev. 1. 2 BCD Semiconductor Manufacturing Limited 8 Data Sheet HIGH SPEED, EXTREMELY LOW NOISE LDO REGULATOR AP2120 Electrical Characteristics (Continued) AP2120-1.5 Electrical Characteristics (VIN=2.5V, TJ=25oC, CIN=1F, COUT=1F, Bold typeface applies over -40oCTJ85oC, unless otherwise specified.) Parameter Output Voltage Symbol VOUT Input Voltage VIN Output Current IOUT Conditions VIN=2.5V 1mAIOUT30mA VIN-VOUT=1V Min Typ Max Unit 1.47 1.5 1.53 V 6 V 150 mA Load Regulation VRLOAD VIN=2.5V 1mAIOUT80mA 12 40 mV Line Regulation VRLINE 2.3VVIN6V IOUT=30mA 4 16 mV IOUT=10mA 400 600 IOUT=100mA 400 600 IOUT=150mA 400 600 IOUT=200mA 400 600 VIN=2.5V, IOUT=0mA 25 50 Ripple 0.5Vp-p, f=1kHz VIN=2.5V 65 dB 150 V/oC 100 ppm/oC Dropout Voltage Quiescent Current Power Supply Rejection Ratio Output Voltage Temperature Coefficient VDROP IQ PSRR VOUT/T (VOUT/VOUT)/T IOUT=30mA mV A Short Current Limit ILIMIT VOUT=0V 50 mA RMS Output Noise VNOISE TA=25oC, IOUT=0 10Hz f100kHz 15 Vrms BCD Semiconductor Manufacturing Limited Nov. 2012 Rev. 1. 2 9 Data Sheet HIGH SPEED, EXTREMELY LOW NOISE LDO REGULATOR AP2120 Electrical Characteristics (Continued) AP2120-1.8 Electrical Characteristics (VIN=2.8V, TJ=25oC, CIN=1F, COUT=1F, Bold typeface applies over -40oCTJ85oC, unless otherwise specified.) Parameter Output Voltage Symbol VOUT Input Voltage VIN Output Current IOUT Conditions VIN=2.8V 1mAIOUT30mA VIN-VOUT=1V Min Typ Max Unit 1.764 1.8 1.836 V 6 V 150 mA Load Regulation VRLOAD VIN=2.8V 1mAIOUT80mA 12 40 mV Line Regulation VRLINE 2.3VVIN6V IOUT=30mA 4 16 mV Dropout Voltage VDROP Quiescent Current Power Supply Rejection Ratio Output Voltage Temperature Coefficient IQ PSRR VOUT/T (VOUT/VOUT)/T IOUT=10mA 20 40 IOUT=100mA 200 300 IOUT=150mA 300 500 VIN=2.8V, IOUT=0mA 25 50 Ripple 0.5Vp-p, f=1kHz VIN=2.8V 65 dB 180 V/oC 100 ppm/oC IOUT=30mA mV A Short Current Limit ILIMIT VOUT=0V 50 mA RMS Output Noise VNOISE TA=25oC 10Hz f100kHz 30 Vrms Nov. 2012 Rev. 1. 2 BCD Semiconductor Manufacturing Limited 10 Data Sheet HIGH SPEED, EXTREMELY LOW NOISE LDO REGULATOR AP2120 Electrical Characteristics (Continued) AP2120-2.5 Electrical Characteristics (VIN=3.5V, TJ=25oC, CIN=1F, COUT=1F, Bold typeface applies over -40oCTJ85oC, unless otherwise specified.) Parameter Output Voltage Symbol VOUT Input Voltage VIN Output Current IOUT Conditions VIN=3.5V 1mAIOUT30mA VIN-VOUT=1V Min Typ Max Unit 2.45 2.5 2.55 V 6 V 150 mA Load Regulation VRLOAD VIN=3.5V 1mAIOUT80mA 12 40 mV Line Regulation VRLINE 3VVIN6V IOUT=30mA 4 16 mV Dropout Voltage VDROP Quiescent Current Power Supply Rejection Ratio Output Voltage Temperature Coefficient IQ PSRR VOUT/T (VOUT/VOUT)/T IOUT=10mA 20 40 IOUT=100mA 200 300 IOUT=150mA 300 500 VIN=3.5V, IOUT=0mA 25 50 Ripple 0.5Vp-p, f=1kHz VIN=3.5V 65 dB 250 V/oC 100 ppm/oC IOUT=30mA mV A Short Current Limit ILIMIT VOUT=0V 50 mA RMS Output Noise VNOISE TA=25oC 10Hz f100kHz 30 Vrms BCD Semiconductor Manufacturing Limited Nov. 2012 Rev. 1. 2 11 Data Sheet HIGH SPEED, EXTREMELY LOW NOISE LDO REGULATOR AP2120 Electrical Characteristics (Continued) AP2120-2.8 Electrical Characteristics (VIN=3.8V, TJ=25oC, CIN=1F, COUT=1F, Bold typeface applies over -40oCTJ85oC, unless otherwise specified.) Parameter Output Voltage Symbol VOUT Input Voltage VIN Output Current IOUT Conditions VIN=3.8V 1mAIOUT30mA VIN-VOUT=1V Min Typ Max Unit 2.744 2.8 2.856 V 6 V 150 mA Load Regulation VRLOAD VIN=3.8V 1mAIOUT80mA 12 40 mV Line Regulation VRLINE 3.3VVIN6V IOUT=30mA 4 16 mV Dropout Voltage VDROP Quiescent Current Power Supply Rejection Ratio Output Voltage Temperature Coefficient IQ PSRR VOUT/T (VOUT/VOUT)/T IOUT=10mA 20 40 IOUT=100mA 200 300 IOUT=150mA 300 500 VIN=3.8V, IOUT=0mA 25 50 Ripple 0.5Vp-p, f=1kHz VIN=3.8V 65 dB 280 V/oC 100 ppm/oC IOUT=30mA mV A Short Current Limit ILIMIT VOUT=0V 50 mA RMS Output Noise VNOISE TA=25oC 10Hz f100kHz 30 Vrms Nov. 2012 Rev. 1. 2 BCD Semiconductor Manufacturing Limited 12 Data Sheet HIGH SPEED, EXTREMELY LOW NOISE LDO REGULATOR AP2120 Electrical Characteristics (Continued) AP2120-3.0 Electrical Characteristics (VIN=4V, TJ=25oC, CIN=1F, COUT=1F, Bold typeface applies over -40oCTJ85oC, unless otherwise specified.) Parameter Output Voltage Symbol VOUT Input Voltage VIN Output Current IOUT Conditions VIN=4V 1mAIOUT30mA VIN-VOUT=1V Min Typ Max Unit 2.94 3.0 3.06 V 6 V 150 mA Load Regulation VRLOAD VIN=4V 1mAIOUT80mA 12 40 mV Line Regulation VRLINE 3.5VVIN6V IOUT=30mA 4 16 mV IOUT=10mA 20 40 IOUT=100mA 200 300 IOUT=150mA 300 500 VIN=4V, IOUT=0mA 25 50 Ripple 0.5Vp-p, f=1kHz VIN=4V 65 dB 300 V/oC 100 ppm/oC Dropout Voltage Quiescent Current Power Supply Rejection Ratio Output Voltage Temperature Coefficient VDROP IQ PSRR VOUT/T (VOUT/VOUT)/T IOUT=30mA mV A Short Current Limit ILIMIT VOUT=0V 50 mA RMS Output Noise VNOISE TA=25oC 10Hz f100kHz 30 Vrms BCD Semiconductor Manufacturing Limited Nov. 2012 Rev. 1. 2 13 Data Sheet HIGH SPEED, EXTREMELY LOW NOISE LDO REGULATOR AP2120 Electrical Characteristics (Continued) AP2120-3.2 Electrical Characteristics (VIN=4.2V, TJ=25oC, CIN=1F, COUT=1F, Bold typeface applies over -40oCTJ85oC, unless otherwise specified.) Parameter Output Voltage Symbol VOUT Input Voltage VIN Output Current IOUT Conditions VIN=4.2V 1mAIOUT30mA VIN-VOUT=1V Min Typ Max Unit 3.136 3.2 3.264 V 6 V 150 mA Load Regulation VRLOAD VIN=4.2V 1mA IOUT 80mA 12 40 mV Line Regulation VRLINE 3.7VVIN6V IOUT=30mA 4 16 mV Dropout Voltage VDROP Quiescent Current Power Supply Rejection Ratio Output Voltage Temperature Coefficient IQ PSRR VOUT/T (VOUT/VOUT)/T IOUT=10mA 20 40 IOUT=100mA 200 300 IOUT=150mA 300 500 VIN=4.2V, IOUT=0mA 25 50 Ripple 0.5Vp-p, f=1kHz VIN=4.2V 65 dB 320 V/oC 100 ppm/oC IOUT=30mA mV A Short Current Limit ILIMIT VOUT=0V 50 mA RMS Output Noise VNOISE TA=25oC 10Hz f100kHz 30 Vrms Nov. 2012 Rev. 1. 2 BCD Semiconductor Manufacturing Limited 14 Data Sheet HIGH SPEED, EXTREMELY LOW NOISE LDO REGULATOR AP2120 Electrical Characteristics (Continued) AP2120-3.3 Electrical Characteristics (VIN=4.3V, TJ=25oC, CIN=1F, COUT=1F, Bold typeface applies over -40oCTJ85oC, unless otherwise specified.) Parameter Output Voltage Symbol VOUT Input Voltage VIN Output Current IOUT Conditions VIN=4.3V 1mAIOUT30mA VIN-VOUT=1V Min Typ Max Unit 3.234 3.3 3.366 V 6 V 150 mA Load Regulation VRLOAD VIN=4.3V 1mA IOUT 80mA 12 40 mV Line Regulation VRLINE 3.8VVIN6V IOUT=30mA 4 16 mV IOUT=10mA 20 40 Dropout Voltage VDROP IOUT=100mA 200 300 IOUT=150mA 300 500 VIN=4.3V, IOUT=0mA 25 50 Ripple 0.5Vp-p, f=1kHz VIN=4.3V 65 dB 330 V/oC 100 ppm/oC Quiescent Current Power Supply Rejection Ratio Output Voltage Temperature Coefficient IQ PSRR VOUT/T (VOUT/VOUT)/T IOUT=30mA mV A Short Current Limit ILIMIT VOUT=0V 50 mA RMS Output Noise VNOISE TA=25oC 10Hz f100kHz 30 Vrms BCD Semiconductor Manufacturing Limited Nov. 2012 Rev. 1. 2 15 Data Sheet HIGH SPEED, EXTREMELY LOW NOISE LDO REGULATOR AP2120 Electrical Characteristics (Continued) AP2120-3.6 Electrical Characteristics (VIN=4.6V, TJ=25oC, CIN=1F, COUT=1F, Bold typeface applies over -40oCTJ85oC, unless otherwise specified.) Parameter Output Voltage Symbol VOUT Input Voltage VIN Output Current IOUT Conditions VIN=4.6V 1mAIOUT30mA VIN-VOUT=1V Min Typ Max Unit 3.528 3.6 3.672 V 6 V 150 mA Load Regulation VRLOAD VIN=4.6V 1mA IOUT 80mA 12 40 mV Line Regulation VRLINE 4.6VVIN6V IOUT=30mA 4 16 mV IOUT=10mA 20 40 Dropout Voltage VDROP IOUT=100mA 200 300 IOUT=150mA 300 500 VIN=4.6V, IOUT=0mA 25 50 Ripple 0.5Vp-p, f=1kHz VIN=4.6V 65 dB 330 V/oC 100 ppm/oC 50 mA 30 Vrms Quiescent Current Power Supply Rejection Ratio Output Voltage Temperature Coefficient Short Current Limit RMS Output Noise IQ PSRR VOUT/T (VOUT/VOUT)/T ILIMIT VNOISE IOUT=30mA VOUT=0V =25oC TA 10Hz f100kHz Nov. 2012 Rev. 1. 2 mV A BCD Semiconductor Manufacturing Limited 16 Data Sheet HIGH SPEED, EXTREMELY LOW NOISE LDO REGULATOR AP2120 Electrical Characteristics (Continued) AP2120-4.0 Electrical Characteristics (VIN=5.0V, TJ=25oC, CIN=1F, COUT=1F, Bold typeface applies over -40oCTJ85oC, unless otherwise specified.) Parameter Output Voltage Symbol VOUT Input Voltage VIN Output Current IOUT Conditions VIN=5.0V 1mAIOUT30mA VIN-VOUT=1V Min Typ Max Unit 3.92 4.0 4.08 V 6 V 150 mA Load Regulation VRLOAD VIN=5.0V 1mA IOUT 80mA 12 40 mV Line Regulation VRLINE 5VVIN6V IOUT=30mA 4 16 mV IOUT=10mA 20 40 IOUT=100mA 200 300 IOUT=150mA 300 500 VIN=5.0V, IOUT=0mA 25 50 Ripple 0.5Vp-p, f=1kHz VIN=5.0V 65 dB 330 V/oC 100 ppm/oC Dropout Voltage Quiescent Current Power Supply Rejection Ratio Output Voltage Temperature Coefficient VDROP IQ PSRR VOUT/T (VOUT/VOUT)/T IOUT=30mA mV A Short Current Limit ILIMIT VOUT=0V 50 mA RMS Output Noise VNOISE TA=25oC 10Hz f100kHz 30 Vrms BCD Semiconductor Manufacturing Limited Nov. 2012 Rev. 1. 2 17 Data Sheet HIGH SPEED, EXTREMELY LOW NOISE LDO REGULATOR AP2120 Electrical Characteristics (Continued) AP2120-5.0 Electrical Characteristics (VIN=6.0V, TJ=25oC, CIN=1F, COUT=1F, Bold typeface applies over -40oCTJ85oC, unless otherwise specified.) Parameter Output Voltage Symbol VOUT Input Voltage VIN Output Current IOUT Conditions VIN=6.0V 1mAIOUT30mA VIN-VOUT=1V Min Typ Max Unit 4.9 5.0 5.1 V 6 V 150 mA Load Regulation VRLOAD VIN=4.3V 1mA IOUT 80mA 12 40 mV Line Regulation VRLINE 5.5VVIN6V IOUT=30mA 4 16 mV IOUT=10mA 20 40 Dropout Voltage VDROP IOUT=100mA 200 300 IOUT=150mA 300 500 VIN=6.0V, IOUT=0mA 25 50 Ripple 0.5Vp-p, f=1kHz VIN=6.0V 65 dB 330 V/oC 100 ppm/oC Quiescent Current Power Supply Rejection Ratio Output Voltage Temperature Coefficient IQ PSRR VOUT/T (VOUT/VOUT)/T IOUT=30mA mV A Short Current Limit ILIMIT VOUT=0V 50 mA RMS Output Noise VNOISE TA=25oC 10Hz f100kHz 30 Vrms Nov. 2012 Rev. 1. 2 BCD Semiconductor Manufacturing Limited 18 Data Sheet HIGH SPEED, EXTREMELY LOW NOISE LDO REGULATOR AP2120 Typical Performance Characteristics 2.535 2.5 2.530 2.525 Output Voltage (V) Output Voltage (V) 2.0 1.5 AP2120-2.5 o TC=-40 C 1.0 TC=25 C o TC=85 C 0.0 0.00 0.10 0.15 0.20 0.25 2.510 AP2120-2.5 IOUT=10mA 2.505 IOUT=50mA IOUT=100mA IOUT=150mA VIN=3.5V 2.495 VIN=3.5V 0.05 2.515 2.500 o 0.5 2.520 2.490 -40 0.30 -20 0 20 40 60 80 100 120 o Output Current (A) Case Temperature ( C) Figure 4. Output Voltage vs. Output Current Figure 5. Output Voltage vs. Case Temperature 35 AP2120-2.5 o TC=-40 C 55 30 o TC=25 C 50 Quiescent Current (A) Quiescent Current (A) 25 20 15 AP2120-2.5 o TC=-40 C 10 o TC=25 C 5 o o TC=85 C VIN=3.5V 45 40 35 30 TC=85 C IOUT=0 0 0 1 2 3 4 5 25 0.00 6 0.05 0.10 0.15 0.20 Output Current (A) Input Voltage (V) Figure 7. Quiescent Current vs. Output Current Figure 6. Quiescent Current vs. Input Voltage BCD Semiconductor Manufacturing Limited Nov. 2012 Rev. 1. 2 19 Data Sheet HIGH SPEED, EXTREMELY LOW NOISE LDO REGULATOR AP2120 50 400 45 350 40 300 Dropout Voltage (V) Quiescent Current (A) Typical Performance Characteristics (Continued) 35 30 25 20 AP2120-2.5 VIN=3.5V 15 IOUT=0 10 -40 -20 0 20 40 60 80 100 AP2120-2.5 o TC=-40 C o TC=25 C o TC=85 C 250 200 150 100 50 0 0.00 120 o Case Temperature ( C) 0.02 0.04 0.06 0.08 0.10 0.12 0.14 0.16 Output Current (A) Figure 9. Dropout Voltage vs. Output Current Figure 8. Quiescent Current vs. Case Temperature IOUT(50mV/Div) 450 400 300 AP2120-2.5 100 50 0 250 200 50 AP2120-2.5 IOUT=10mA 150 100 IOUT=80mA IOUT=150mA 50 0 -40 VOUT (50m /Div) Dropout Voltage (V) 350 150 -20 0 20 40 60 0 -50 -100 80 o Case Temperature ( C) Figure 11. Load Transient (IOUT=0 to 150mA) Figure 10. Dropout Voltage vs. Case Temperature Nov. 2012 Rev. 1. 2 BCD Semiconductor Manufacturing Limited 20 Data Sheet HIGH SPEED, EXTREMELY LOW NOISE LDO REGULATOR AP2120 Typical Performance Characteristics (Continued) VIN (1V/Div) AP2120-2.5 2 IOUT=10mA 1 AP2120-2.5 0 VOUT (50mV/Div) IOUT=150mA 50 0 -50 Figure 12. Line Transient (Condition:VIN=2.5V to 3.5,IOUT=10mA) Figure 13. PSRR vs. Frequency 3.5 VIN (0.5V/Div) AP2120-2.5 2.5 3.0 2.0 2.5 2.0 1.5 Output Voltage 1.0 1.5 0.5 1.0 0 0.5 VOUT(0.5V/Div) Input Voltage 3.0 0 Figure 14. Start-up BCD Semiconductor Manufacturing Limited Nov. 2012 Rev. 1. 2 21 Data Sheet HIGH SPEED, EXTREMELY LOW NOISE LDO REGULATOR AP2120 Typical Application AP2120-2.5 VIN=3.5V VIN VIN VOUT=2.5V VOUT VOUT GND COUT 1F CIN 1F Note: Filter capacitors are required at the AP2120's input and output. 1F capacitor is required at the input. The minimum output capacitance required for stability should be more than 1F with ESR from 0.01 to 100. Ceramic capacitors are recommended. Figure 15. Typical Application of AP2120 Nov. 2012 Rev. 1. 2 BCD Semiconductor Manufacturing Limited 22 Data Sheet HIGH SPEED, EXTREMELY LOW NOISE LDO REGULATOR AP2120 Mechanical Dimensions SOT-23 3.0 7.0 R0.100(0.004) 0.900(0.035) 1.100(0.043) 0.0~10.0 0.020(0.001) 0.100(0.004) 0.200(0.008)MIN 2.800(0.110) 3.000(0.118) 0.550(0.022)REF 7.0 0.080(0.003) 0.150(0.006) 1.200(0.047) 1.400(0.055) 2.300(0.091) 2.500(0.098) 0.920(0.036) 0.980(0.039) 0.100(0.004) GAUGE PLANE 4xR0.100(0.004) 0.500(0.020) 0.700(0.028) 2.0 1.050(0.041)REF Unit: mm(inch) 0.390(0.015) 0.450(0.018) 1.900(0.075)REF BCD Semiconductor Manufacturing Limited Nov. 2012 Rev. 1. 2 23 Data Sheet HIGH SPEED, EXTREMELY LOW NOISE LDO REGULATOR AP2120 Mechanical Dimensions (Continued) Unit: mm(inch) SOT-89 1.550(0.061)REF 4.400(0.173) 4.600(0.181) 1.400(0.055) 1.600(0.063) 1.030(0.041)REF 45 2.300(0.091) 2.600(0.102) 3.950(0.156) 4.250(0.167) 2.060(0.081)REF 3 0.900(0.035) 1.100(0.043) 0.320(0.013) 0.520(0.020) 0.480(0.019) 0.320(0.013) 0.520(0.020) 10 0.350(0.014) 0.450(0.018) 3.000(0.118) TYP 1.500(0.059) 1.800(0.071) 0.320(0.013)REF 3 2.210(0.087)REF 1.620(0.064)REF R0.150(0.006) 10 Nov. 2012 Rev. 1. 2 BCD Semiconductor Manufacturing Limited 24 Data Sheet HIGH SPEED, EXTREMELY LOW NOISE LDO REGULATOR AP2120 Mechanical Dimensions (Continued) TO-92 (Bulk Packing) Unit: mm(inch) 1.000(0. 039) 3.430(0.135) MIN 3.700(0.146) 3.300(0.130) 1.400(0.055) 0.320(0. 013) 0.510(0. 020) 0. 000(0. 000) 0. 380(0. 015) 1. 600(0. 063) MAX 4.700(0.185) 1.270(0. 050) TYP 15.500(0.610) 0.360(0. 014) 0.760(0. 030) 12.500(0.492) 4.300(0.169) 4.400(0.173) 4.800(0.189) 2.420(0. 095) 2.660(0.105) BCD Semiconductor Manufacturing Limited Nov. 2012 Rev. 1. 2 25 Data Sheet HIGH SPEED, EXTREMELY LOW NOISE LDO REGULATOR AP2120 Mechanical Dimensions (Continued) TO-92 (Ammo Packing) Unit: mm(inch) 1. 100(0. 043) 3. 430(0. 135) MIN 1.270(0.050) Typ 2.500(0.098) 4.000 (0.157 ) 0.000(0.000) 0.380(0.015) 1.600(0. 063) MAX 14.500(0.571) 12.500(0.492) 0. 320(0. 013) 0. 510(0.020) 3.800(0.150) 3.300(0.130) 1. 400(0.055) 4.700(0.185) 4.300(0.169) 4.400(0.173) 4.800 (0.189 ) 13.000(0. 512) 15.000 (0.591 ) 0.380(0.015) 0.550(0.022 ) 2.540(0.100) Typ Nov. 2012 Rev. 1. 2 BCD Semiconductor Manufacturing Limited 26 BCD Semiconductor Manufacturing Limited http://www.bcdsemi.com IMPORTANT NOTICE IMPORTANT NOTICE BCD Semiconductor BCD Semiconductor Manufacturing Manufacturing Limited Limited reserves reserves the the right right to to make make changes changes without without further further notice notice to to any any products products or or specifispecifications herein. cations herein. BCD BCD Semiconductor Semiconductor Manufacturing Manufacturing Limited Limited does does not not assume assume any any responsibility responsibility for for use use of of any any its its products products for for any any particular purpose, particular purpose, nor nor does does BCD BCD Semiconductor Semiconductor Manufacturing Manufacturing Limited Limited assume assume any any liability liability arising arising out out of of the the application application or or use use of any of any its its products products or or circuits. circuits. BCD BCD Semiconductor Semiconductor Manufacturing Manufacturing Limited Limited does does not not convey convey any any license license under under its its patent patent rights rights or or other rights other rights nor nor the the rights rights of of others. others. MAIN SITE SITE MAIN - Headquarters BCD Semiconductor Manufacturing Limited BCD Semiconductor Manufacturing Limited - Wafer Fab No. 1600, Zi Xing Road, Shanghai ZiZhu Science-basedLimited Industrial Park, 200241, China Shanghai SIM-BCD Semiconductor Manufacturing Tel: Fax: +86-21-24162277 800,+86-21-24162266, Yi Shan Road, Shanghai 200233, China Tel: +86-21-6485 1491, Fax: +86-21-5450 0008 REGIONAL SALES OFFICE Shenzhen OfficeSALES OFFICE REGIONAL - Wafer FabSemiconductor Manufacturing Limited BCD Shanghai SIM-BCD Semiconductor Manufacturing Co., Ltd. - IC Design Group 800 Yi Shan Road, Shanghai 200233, China Corporation Advanced Analog Circuits (Shanghai) Tel: +86-21-6485 1491,YiFax: 0008200233, China 8F, Zone B, 900, Shan+86-21-5450 Road, Shanghai Tel: +86-21-6495 9539, Fax: +86-21-6485 9673 Taiwan Office Shanghai Semiconductor Manufacturing Co., Ltd., Shenzhen Office BCD Taiwan Semiconductor Shenzhen SIM-BCD Office Office (Taiwan) Company Limited Unit A Room 1203, Skyworth Bldg., Gaoxin Ave.1.S., Nanshan Shenzhen, 4F, 298-1, Guang Road,(Taiwan) Nei-Hu District, Taipei, Shanghai SIM-BCD Semiconductor Manufacturing Co., Ltd.District, Shenzhen Office BCDRui Semiconductor Company Limited China Taiwan Advanced Analog Circuits (Shanghai) Corporation Shenzhen Office 4F, 298-1, Rui Guang Road, Nei-Hu District, Taipei, Tel: +86-755-8826 Tel: +886-2-2656 2808 Room E, 5F, Noble 7951 Center, No.1006, 3rd Fuzhong Road, Futian District, Shenzhen 518026, China Taiwan Fax: +86-755-88267951 7865 Fax: +886-2-2656 28062808 Tel: +86-755-8826 Tel: +886-2-2656 Fax: +86-755-8826 7865 Fax: +886-2-2656 2806 USA Office BCD Office Semiconductor Corp. USA 30920Semiconductor Huntwood Ave.Corporation Hayward, BCD CA 94544, USA Ave. Hayward, 30920 Huntwood Tel :94544, +1-510-324-2988 CA U.S.A Fax:: +1-510-324-2988 +1-510-324-2788 Tel Fax: +1-510-324-2788