1-34 TIMER ACCESSORIES Potentiometer 3/8" 3/8" x 32 THREADS NCC remote mounting potentiometers have 24" wire leads, dust protection, 1/4" shaft (no knob) and are calibrated to provide constant timing. These are suitable for mounting through a panel and can be used with a dial and knob. A locking bushing is used in place of knob to secure setting. Not for use on K or CKK Series timers. 22 GA. .032 - 105 C UL STYLE 1015 WIRE 24" 1" 3/8" x 32 NUT INSULATING TUBING OVER TERMINALS ORDERING INFORMATION 1 Megohm remote potentiometer ASY-0001M-450 Locking bushing MLO-K1701-011 1/4" x .032 FEMALE FASTONS Dial Plate Range 1 to 100% Dial Plate is shown, others shown in chart are typical. .375 dia. ORDERING INFORMATION Dial Plate - Range: .05 to 2 sec. MDP-00002-011 Dial Plate - Range: .05 to 5 sec. MDP-00005-011 Dial Plate - Range: .1 to 10 sec. MDP-00010-011 Dial Plate - Range: .3 to 30 sec. MDP-00030-011 Dial Plate - Range: .6 to 60 sec. MDP-00060-011 Dial Plate - Range: 1.2 to 120 sec. MDP-00120-011 Dial Plate - Range: 1.8 to 180 sec. MDP-00180-011 Dial Plate - Range: 3 to 300 sec. MDP-00300-011 Knob: 1" skirt, 1/4" hole, brass insert MKN-TK191-011 60 40 80 CL .900 MDP-0100%-011 2.00 Dial Plate - Range: 1 to 100% 20 1 % 100 .625 2.00 MKN-TK191-011 .05 5.75 Hold-down Straps .33 .45 A locking bushing is used in place of knob to secure setting. Used on all plug in timers with knobs except K and CKK Series. .500 .437 .065 .015 .57 ORDERING INFORMATION Hold-down strap for K Series timers 7.00 ASY-STRAP-5.75L .50 .25 .33 .50 typ. .45 Hold-down strap for T, S, A, and CKK timers ASY-STRAP-7.00L Locking bushing MLO-010MM-.75 .065 .015 1.85 1.76 Mounting Bracket ORDERING INFORMATION Mounting bracket for 1/16 DIN enclosure MBK-1/16D-011 .16 .28 1.76 .90 2.26 AMETEK National Controls Corp. * 1725 Western Drive * West Chicago, Illinois 60185 * Tel: 800-323-2593 * 630-231-5900 * FAX: 630-231-1377 * www.nationalcontrols.com 1-35 TIMER ACCESSORIES Sockets 1.575 .866 .315 .709 MSO-0008P-012 2.362 8-pin circular socket, DIN rail mountable 165 dia. 5 4 3 7 8 1 2 Mounting Holes .165 dia. 2 pl. .984 ORDERING INFORMATION 6 1.299 1.299 2.323 .315 MSO-0011P-012 .165 dia. 2.632 11-pin circular socket, DIN rail mountable 8 7 9 10 6 5 4 2 3 Mounting Holes .165 dia. 2 pl. 1.063 ORDERING INFORMATION Terminal Arrangement 1.299 1.299 11 1 Top View .709 .866 1.312 4 1.844 11-pin circular socket for DIN panel mount 8 7 .156 ORDERING INFORMATION 6 5 MSO-0011P-013 3 2 1 11 10 9 1.844 0.315 11-pin spade socket, DIN rail mountable 6 5 4 3 2 1 0.165 DIA Mounting Holes (2) 2.205 0.165 2.992 ORDERING INFORMATION Terminal Arrangement 0.709 1.457 MSO-00KUP-012 B 9 1.417 1.693 0.571 A 8 7 Top View 0.987 AMETEK National Controls Corp. * 1725 Western Drive * West Chicago, Illinois 60185 * Tel: 800-323-2593 * 630-231-5900 * FAX: 630-231-1377 * www.nationalcontrols.com