HEC4528BT,112 - NXP Semiconductors

HEF4528B

Dual monostable multivibrator

Rev. 10 — 14 March 2017 Product data sheet

1 General description

The HEF4528B is a dual retriggerable-resetable monostable multivibrator. Each

multivibrator has an active LOW input (nA), and active HIGH input (nB), an active LOW

clear direct input (nCD), an output (nQ) and its complement (nQ), and two external timing

component connecting pins (nCEXT, always connected to ground, and nREXT/CEXT).

An external timing capacitor (CEXT) must be connected between nCEXT and

nREXT/CEXT and an external resistor (REXT) must be connected between nREXT/CEXT

and VDD. The output pulse duration is determined by the external timing components

CEXT and REXT. A HIGH-to-LOW transition on nA when nB is LOW or a LOW-to-HIGH

transition on nB when nA is HIGH produces a positive pulse (LOW-HIGH-LOW) on nQ

and a negative pulse (HIGH-LOW-HIGH) on nQ if the nCD is HIGH. A LOW on nCD

forces nQ LOW, nQ HIGH and inhibits any further pulses until nCD is HIGH.

It operates over a recommended VDD power supply range of 3 V to 15 V referenced to

VSS (usually ground). Unused inputs must be connected to VDD, VSS, or another input.

2 Features and benefits

•Fully static operation

•5 V, 10 V, and 15 V parametric ratings

•Standardized symmetrical output characteristics

•Specified from -40 °C to +85 °C

•Complies with JEDEC standard JESD 13-B

3 Ordering information

Table 1. Ordering information

All types operate from -40 °C to +85 °C.

PackageType number

Name Description Version

HEF4528BT SO16 plastic small outline package; 16 leads; body width 3.9 mm SOT109-1

Nexperia HEF4528B

Dual monostable multivibrator

Product data sheet Rev. 10 — 14 March 2017

2 / 15

4 Functional diagram

001aae727

1CEXT

1REXT/CEXT

1CD

2CEXT

2REXT/CEXT

2CD

Figure 1. Functional diagram

001aae729

nCEXT

nREXT/

CEXT

nCD

Figure 2. Logic diagram for one monostable

multivibrator

5 Pinning information

5.1 Pinning

HEF4528B

1CEXT VDD

1REXT/CEXT 2CEXT

1CD 2REXT/CEXT

1B 2CD

1A 2B

1Q 2A

1Q 2Q

VSS 2Q

001aae728

Figure 3. Pin configuration (SO16)

Nexperia HEF4528B

Dual monostable multivibrator

Product data sheet Rev. 10 — 14 March 2017

3 / 15

5.2 Pin description

Table 2. Pin description

Symbol Pin Description

1CEXT, 2CEXT 1, 15 external capacitor connection (always connected to ground)

1REXT/CEXT, 2REXT/CEXT 2, 14 external capacitor/resistor connection

1CD, 2CD 3, 13 clear direct input (active LOW)

1B, 2B 4, 12 input (LOW-to-HIGH triggered)

1A, 2A 5, 11 input (HIGH-to-LOW triggered)

1Q, 2Q 6, 10 output

1Q, 2Q 7, 9 complementary output (active LOW)

VSS 8 ground supply voltage

VDD 16 supply voltage

6 Functional description

Table 3. Function table [1]

Inputs Outputs

A B CD Q Q

↓ L H

H ↑ H

X X L L H

[1] H = HIGH voltage level;

L = LOW voltage level;

X = don’t care;

↑ = positive-going transition;

↓ = negative-going transition;

= one HIGH level output pulse, with the pule width determined by CEXT and REXT;

= one LOW level output pulse, with the pulse width determined by CEXT and REXT.

Nexperia HEF4528B

Dual monostable multivibrator

Product data sheet Rev. 10 — 14 March 2017

4 / 15

7 Limiting values

Table 4. Limiting values

In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to VSS = 0 V (ground).

Symbol Parameter Conditions Min Max Unit

VDD supply voltage -0.5 +18 V

IIK input clamping current VI < -0.5 V or VI > VDD + 0.5 V - ±10 mA

VIinput voltage -0.5 VDD + 0.5 V

IOK output clamping current VO < -0.5 V or VO > VDD + 0.5 V - ±10 mA

II/O input/output current - ±10 mA

IDD supply current - 50 mA

Tstg storage temperature -65 +150 °C

Tamb ambient temperature -40 +85 °C

Tamb = -40 °C to +85 °CPtot total power dissipation

SO16 package [1] - 500 mW

P power dissipation per output - 100 mW

[1] For SO16 package: Ptot derates linearly with 8 mW/K above 70 °C.

8 Recommended operating conditions

Table 5. Recommended operating conditions

Symbol Parameter Conditions Min Max Unit

VDD supply voltage 3 15 V

VIinput voltage 0 VDD V

Tamb ambient temperature in free air -40 +85 °C

VDD = 5 V - 3.75 μs/V

VDD = 10 V - 0.5 μs/V

Δt/ΔV input transition rise and fall rate

VDD = 15 V - 0.08 μs/V

Nexperia HEF4528B

Dual monostable multivibrator

Product data sheet Rev. 10 — 14 March 2017

5 / 15

9 Static characteristics

Table 6. Static characteristics

VSS = 0 V; VI = VSS or VDD unless otherwise specified.

Tamb = -40 °C Tamb = 25 °C Tamb = 85 °CSymbol Parameter Conditions VDD

Min Max Min Max Min Max

Unit

5 V 3.5 - 3.5 - 3.5 - V

10 V 7.0 - 7.0 - 7.0 - V

VIH HIGH-level

input voltage

|IO| < 1 μA

15 V 11.0 - 11.0 - 11.0 - V

5 V - 1.5 - 1.5 - 1.5 V

10 V - 3.0 - 3.0 - 3.0 V

VIL LOW-level

input voltage

|IO| < 1 μA

15 V - 4.0 - 4.0 - 4.0 V

5 V 4.95 - 4.95 - 4.95 - V

10 V 9.95 - 9.95 - 9.95 - V

VOH HIGH-level

output voltage

|IO| < 1 μA

15 V 14.95 - 14.95 - 14.95 - V

5 V - 0.05 - 0.05 - 0.05 V

10 V - 0.05 - 0.05 - 0.05 V

VOL LOW-level

output voltage

|IO| < 1 μA

15 V - 0.05 - 0.05 - 0.05 V

VO = 2.5 V 5 V - -1.7 - -1.4 - -1.1 mA

VO = 4.6 V 5 V - -0.52 - -0.44 - -0.36 mA

VO = 9.5 V 10 V - -1.3 - -1.1 - -0.9 mA

IOH HIGH-level

output current

VO = 13.5 V 15 V - -3.6 - -3.0 - -2.4 mA

VO = 0.4 V 5 V 0.52 - 0.44 - 0.36 - mA

VO = 0.5 V 10 V 1.3 - 1.1 - 0.9 - mA

IOL LOW-level

output current

VO = 1.5 V 15 V 3.6 - 3.0 - 2.4 - mA

IIinput leakage

current

15 V - ±0.3 - ±0.3 - ±1.0 μA

5 V - 20 - 20 - 150 μA

10 V - 40 - 40 - 300 μA

IDD supply current all valid input

combinations;

IO = 0 A

15 V - 80 - 80 - 600 μA

CIinput capacitance - - - - 7.5 - - pF

Nexperia HEF4528B

Dual monostable multivibrator

Product data sheet Rev. 10 — 14 March 2017

6 / 15

10 Dynamic characteristics

Table 7. Dynamic characteristics

VSS = 0 V; Tamb = 25 °C; unless otherwise specified; for waveforms see Figure 4 to Figure 6; for test circuit see Figure 7.

Symbol Parameter Conditions VDD Extrapolation formula [1] Min Typ Max Unit

5 V 113 ns + (0.55 ns/pF)CL- 140 280 ns

10 V 39 ns + (0.23 ns/pF)CL- 50 100 ns

nA or nB to nQ;

see Figure 5

15 V 27 ns + (0.16 ns/pF)CL- 35 70 ns

5 V 78 ns + (0.55 ns/pF)CL- 105 210 ns

10 V 29 ns + (0.23 ns/pF)CL- 40 85 ns

tPHL HIGH to LOW

propagation delay

nCD to nQ;

see Figure 5

15 V 22 ns + (0.16 ns/pF)CL- 30 60 ns

5 V 128 ns + (0.55 ns/pF)CL- 155 305 ns

10 V 49 ns + (0.23 ns/pF)CL- 60 115 ns

nA or nB to nQ;

see Figure 5

15 V 32 ns + (0.16 ns/pF)CL- 40 80 ns

5 V 93 ns + (0.55 ns/pF)CL- 120 240 ns

10 V 39 ns + (0.23 ns/pF)CL- 50 105 ns

tPLH LOW to HIGH

propagation delay

nCD to nQ;

see Figure 5

15 V 27 ns + (0.16 ns/pF)CL- 35 70 ns

5 V [2] 10 ns + (1.00 ns/pF)CL- 60 120 ns

10 V 9 ns + (0.42 ns/pF)CL- 30 60 ns

tttransition time nQ, nQ;

see Figure 5

15 V 6 ns + (0.28 ns/pF)CL- 20 40 ns

5 V 0 -75 - ns

10 V 0 -30 - ns

trec recovery time nCD to nA or nB;

see Figure 6

15 V 0 -25 - ns

5 V 0 -105 - ns

10 V 0 -40 - ns

tsu set-up time nCD to nA or nB;

see Figure 6

15 V 0 -25 - ns

5 V 50 25 - ns

10 V 30 15 - ns

nA LOW;

minimum width;

see Figure 6

15 V 20 10 - ns

5 V 50 25 - ns

10 V 30 15 - ns

nB HIGH;

minimum width;

see Figure 6

15 V 20 10 - ns

5 V 60 30 - ns

10 V 35 15 - ns

nCD LOW;

minimum width;

see Figure 6

15 V 25 10 - ns

5 V [3] - 235 - ns

10 V - 155 - ns

tWpulse width

nQ or nQ;

REXT = 5 kΩ;

CEXT = 15 pF;

see Figure 6 15 V - 140 - ns

Nexperia HEF4528B

Dual monostable multivibrator

Product data sheet Rev. 10 — 14 March 2017

7 / 15

Symbol Parameter Conditions VDD Extrapolation formula [1] Min Typ Max Unit

5 V [4] - 5.45 - μs

10 V - 4.95 - μs

nQ or nQ;

REXT = 10 kΩ;

CEXT = 1 nF;

see Figure 6 15 V - 4.85 - μs

5 V [5] - ±3 - %

10 V - ±2 - %

nQ output variation

over temperature

range

15 V - ±2 - %

5 V - ±2 - %

10 V - ±1 - %

ΔtWpulse width

variation

nQ output variation

over voltage range

VDD ± 5 %

15 V - ±1 - %

5 V 5 - 2 MΩ

10 V 5 - 2 MΩ

REXT external timing

resistor

see Figure 4

15 V 5 - 2 MΩ

5 V no limits

10 V no limits

CEXT external timing

capacitor

see Figure 4

15 V no limits

[1] The typical values of the propagation delay and transition times are calculated from the extrapolation formulas shown (CL in pF).

[2] tt is the same as tTHL and tTLH.

[3] For other REXT, CEXT combinations and CEXT < 0.01 μF see Figure 4.

[4] For other REXT, CEXT combinations and CEXT > 0.01 μF use formula tW = K × REXT × CEXT.

where: tW = output pulse width (s);

REXT = external timing resistor (Ω);

CEXT = external timing capacitor (F);

K = 0.42 for VDD = 5 V;

K = 0.32 for VDD = 10 V;

K = 0.30 for VDD = 15 V.

[5] Tamb = -40 °C to +85 °C; ΔtW is referenced to tW at Tamb = 25 °C.

Table 8. Dynamic power dissipation PD

PD can be calculated from the formulas shown. VSS = 0 V; tr = tf ≤ 20 ns; Tamb = 25 °C.

Symbol Parameter VDD Typical formula for PD (μW) where:

5 V PD = 4000 × fi + Σ(fo × CL) × VDD

10 V PD = 20000 × fi + Σ(fo × CL) × VDD

PDdynamic power

dissipation

15 V PD = 59000 × fi + Σ(fo × CL) × VDD

fi = input frequency in MHz;

fo = output frequency in MHz;

CL = output load capacitance in pF;

VDD = supply voltage in V;

Σ(fo × CL) = sum of the outputs.

Nexperia HEF4528B

Dual monostable multivibrator

Product data sheet Rev. 10 — 14 March 2017

8 / 15

001aae730

CEXT (pF)

10 104

103

102

103

(µs)

10- 1

(1)

(2)

(3)

(4)

(5)

(6)

(7)

(8)

(9)

(1) REXT = 100 kΩ, VDD = 5 V.

(2) REXT = 100 kΩ, VDD = 10 V.

(3) REXT = 100 kΩ, VDD = 15 V.

(4) REXT = 10 kΩ, VDD = 5 V.

(5) REXT = 10 kΩ, VDD = 10 V.

(6) REXT = 10 kΩ, VDD = 15 V.

(7) REXT = 5 kΩ, VDD = 5 V.

(8) REXT = 5 kΩ, VDD = 10 V.

(9) REXT = 5 kΩ, VDD = 15 V.

Figure 4. Output pulse width (tW) as a function of external timing capacitor (CEXT)

10.1 Waveforms and test circuit

001aaj547

trtf

VMVM

tPLH

nB input

nA input

nCD input

nQ output

10 %

90 %

tPLH tTHL tTLH

tTHL

tTLH

tPHL

tPHL tPHL tPLH

10 %

90 %

0 V

VOH

VOL

VOH

VOL

0 V

Measurement points are given in Table 9.

Logic levels: VOL and VOH are typical output levels that occur with the output load.

Figure 5. Waveforms showing propagation delays and transition times

Nexperia HEF4528B

Dual monostable multivibrator

Product data sheet Rev. 10 — 14 March 2017

9 / 15

001aae731

nCD input

nA input

nB input

tWtrec tW

tsu

VOH

tsu tW

nQ output

0 V

VOL

Measurement points are given in Table 9.

Set-up and recovery times are shown as positive values but may be specified as negative values.

Logic levels: VOL and VOH are typical output levels that occur with the output load.

Figure 6. Waveforms showing minimum nA, nB, and nQ pulse widths and set-up and recovery times

Table 9. Measurement points

Supply voltage Input Output

VDD VMVM

5 V to 15 V 0.5VDD 0.5VDD

Nexperia HEF4528B

Dual monostable multivibrator

Product data sheet Rev. 10 — 14 March 2017

10 / 15

VDD

VIVO

001aag182

DUT

Test data is given in Table 10.

Definitions for test circuit:

CL = load capacitance including jig and probe capacitance.

RT = termination resistance should be equal to the output impedance Zo of the pulse generator.

Figure 7. Test circuit for measuring switching times

Table 10. Test data

Supply voltage Input Load

VDD VItr, tfCL

5 V to 15 V VSS or VDD ≤ 20 ns 50 pF

11 Application information

An example of a HEF4528B application is:

•Non-retriggerable monostable multivibrator

001aaj493

monostable

trigger

input

REXT

CEXT

nCD

VDD

nREXT/CEXT

nCEXT

001aaj492

monostable

trigger

input

REXT

CEXT

nCD

nREXT/CEXT

nCEXT

VDD

a. Rising edge triggered b. Falling edge triggered

Figure 8. Non-retriggerable applications

Nexperia HEF4528B

Dual monostable multivibrator

Product data sheet Rev. 10 — 14 March 2017

11 / 15

12 Package outline

detail X

vMA

(A )

pin 1 index

UNIT A

max. A1A2A3bpc D(1) E(1) (1)

e HEL LpQ Zywv θ

REFERENCES

OUTLINE

VERSION

EUROPEAN

PROJECTION ISSUE DATE

IEC JEDEC JEITA

inches

1.75 0.25

0.10

1.45

1.25 0.25 0.49

0.36

0.25

0.19

10.0

9.8

4.0

3.8 1.27 6.2

5.8

0.7

0.6

0.7

0.3 8

0.25 0.1

DIMENSIONS (inch dimensions are derived from the original mm dimensions)

Note

1. Plastic or metal protrusions of 0.15 mm (0.006 inch) maximum per side are not included.

1.0

0.4

SOT109-1 99-12-27

03-02-19

076E07 MS-012

0.069 0.010

0.004

0.057

0.049 0.01 0.019

0.014

0.0100

0.0075

0.39

0.38

0.16

0.15 0.05

1.05

0.041

0.244

0.228

0.028

0.020

0.028

0.012

0.01

0.25

0.01 0.004

0.039

0.016

0 2.5 5 mm

scale

SO16: plastic small outline package; 16 leads; body width 3.9 mm SOT109-1

Figure 9. Package outline SOT109-1 (SO16)

Nexperia HEF4528B

Dual monostable multivibrator

Product data sheet Rev. 10 — 14 March 2017

12 / 15

13 Abbreviations

Table 11. Abbreviations

Acronym Description

DUT Device Under Test

14 Revision history

Table 12. Revision history

Document ID Release date Data sheet status Change notice Supersedes

HEF4528B v.10 20170314 Product data sheet - HEF4528B v.9

Modifications: •The format of this data sheet has been redesigned to comply with the identity guidelines of

Nexperia.

•Legal texts have been adapted to the new company name where appropriate.

HEF4528B v.9 20160530 Product data sheet - HEF4528B v.8

Modifications: •Figure 2: Logic diagram modified.

HEF4528B v.8 20160331 Product data sheet - HEF4528B v.7

Modifications: •Type number HEF4528BP (SOT38-4) removed.

HEF4528B v.7 20111122 Product data sheet - HEF4528B v.6

Modifications: •Section Applications removed

•Table 6: IOH minimum values changed to maximum

HEF4528B v.6 20091127 Product data sheet - HEF4528B v.5

HEF4528B v.5 20090813 Product data sheet - HEF4528B v.4

HEF4528B v.4 20090209 Product data sheet - HEF4528B_CNV v.3

HEF4528B_CNV v.3 19950101 Product specification - HEF4528B_CNV v.2

HEF4528B_CNV v.2 19950101 Product specification - -

Nexperia HEF4528B

Dual monostable multivibrator

Product data sheet Rev. 10 — 14 March 2017

13 / 15

15 Legal information

15.1 Data sheet status

Document status[1][2] Product status[3] Definition

Objective [short] data sheet Development This document contains data from the objective specification for product

development.

Preliminary [short] data sheet Qualification This document contains data from the preliminary specification.

Product [short] data sheet Production This document contains the product specification.

[1] Please consult the most recently issued document before initiating or completing a design.

[2] The term 'short data sheet' is explained in section "Definitions".

[3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple

devices. The latest product status information is available on the Internet at URL http://www.nexperia.com.

15.2 Definitions

Draft — The document is a draft version only. The content is still under

internal review and subject to formal approval, which may result in

modifications or additions. Nexperia does not give any representations or

warranties as to the accuracy or completeness of information included herein

and shall have no liability for the consequences of use of such information.

Short data sheet — A short data sheet is an extract from a full data sheet

with the same product type number(s) and title. A short data sheet is

intended for quick reference only and should not be relied upon to contain

detailed and full information. For detailed and full information see the

relevant full data sheet, which is available on request via the local Nexperia

sales office. In case of any inconsistency or conflict with the short data sheet,

the full data sheet shall prevail.

Product specification — The information and data provided in a Product

data sheet shall define the specification of the product as agreed between

Nexperia and its customer, unless Nexperia and customer have explicitly

agreed otherwise in writing. In no event however, shall an agreement be

valid in which the Nexperia product is deemed to offer functions and qualities

beyond those described in the Product data sheet.

15.3 Disclaimers

Limited warranty and liability — Information in this document is believed

to be accurate and reliable. However, Nexperia does not give any

representations or warranties, expressed or implied, as to the accuracy

or completeness of such information and shall have no liability for the

consequences of use of such information. Nexperia takes no responsibility

for the content in this document if provided by an information source outside

of Nexperia. In no event shall Nexperia be liable for any indirect, incidental,

punitive, special or consequential damages (including - without limitation -

lost profits, lost savings, business interruption, costs related to the removal

or replacement of any products or rework charges) whether or not such

damages are based on tort (including negligence), warranty, breach of

contract or any other legal theory. Notwithstanding any damages that

customer might incur for any reason whatsoever, Nexperia's aggregate and

cumulative liability towards customer for the products described herein shall

be limited in accordance with the Terms and conditions of commercial sale of

Nexperia.

Right to make changes — Nexperia reserves the right to make changes

to information published in this document, including without limitation

specifications and product descriptions, at any time and without notice. This

document supersedes and replaces all information supplied prior to the

publication hereof.

Suitability for use — Nexperia products are not designed, authorized or

warranted to be suitable for use in life support, life-critical or safety-critical

systems or equipment, nor in applications where failure or malfunction

of an Nexperia product can reasonably be expected to result in personal

injury, death or severe property or environmental damage. Nexperia and its

suppliers accept no liability for inclusion and/or use of Nexperia products in

such equipment or applications and therefore such inclusion and/or use is at

the customer’s own risk.

Applications — Applications that are described herein for any of these

products are for illustrative purposes only. Nexperia makes no representation

or warranty that such applications will be suitable for the specified use

without further testing or modification. Customers are responsible for the

design and operation of their applications and products using Nexperia

products, and Nexperia accepts no liability for any assistance with

applications or customer product design. It is customer’s sole responsibility

to determine whether the Nexperia product is suitable and fit for the

customer’s applications and products planned, as well as for the planned

application and use of customer’s third party customer(s). Customers should

provide appropriate design and operating safeguards to minimize the risks

associated with their applications and products. Nexperia does not accept

any liability related to any default, damage, costs or problem which is based

on any weakness or default in the customer’s applications or products, or

the application or use by customer’s third party customer(s). Customer is

responsible for doing all necessary testing for the customer’s applications

and products using Nexperia products in order to avoid a default of the

applications and the products or of the application or use by customer’s third

party customer(s). Nexperia does not accept any liability in this respect.

Limiting values — Stress above one or more limiting values (as defined in

the Absolute Maximum Ratings System of IEC 60134) will cause permanent

damage to the device. Limiting values are stress ratings only and (proper)

operation of the device at these or any other conditions above those

given in the Recommended operating conditions section (if present) or the

Characteristics sections of this document is not warranted. Constant or

repeated exposure to limiting values will permanently and irreversibly affect

the quality and reliability of the device.

Terms and conditions of commercial sale — Nexperia products are

sold subject to the general terms and conditions of commercial sale, as

published at http://www.nexperia.com/profile/terms, unless otherwise agreed

in a valid written individual agreement. In case an individual agreement is

concluded only the terms and conditions of the respective agreement shall

apply. Nexperia hereby expressly objects to applying the customer’s general

terms and conditions with regard to the purchase of Nexperia products by

customer.

No offer to sell or license — Nothing in this document may be interpreted

or construed as an offer to sell products that is open for acceptance or

the grant, conveyance or implication of any license under any copyrights,

patents or other industrial or intellectual property rights.

Export control — This document as well as the item(s) described herein

may be subject to export control regulations. Export might require a prior

authorization from competent authorities.

Nexperia HEF4528B

Dual monostable multivibrator

Product data sheet Rev. 10 — 14 March 2017

14 / 15

Non-automotive qualified products — Unless this data sheet expressly

states that this specific Nexperia product is automotive qualified, the

product is not suitable for automotive use. It is neither qualified nor tested in

accordance with automotive testing or application requirements. Nexperia

accepts no liability for inclusion and/or use of non-automotive qualified

products in automotive equipment or applications. In the event that customer

uses the product for design-in and use in automotive applications to

automotive specifications and standards, customer (a) shall use the product

without Nexperia's warranty of the product for such automotive applications,

use and specifications, and (b) whenever customer uses the product for

automotive applications beyond Nexperia's specifications such use shall be

solely at customer’s own risk, and (c) customer fully indemnifies Nexperia

for any liability, damages or failed product claims resulting from customer

design and use of the product for automotive applications beyond Nexperia's

standard warranty and Nexperia's product specifications.

Translations — A non-English (translated) version of a document is for

reference only. The English version shall prevail in case of any discrepancy

between the translated and English versions.

15.4 Trademarks

Notice: All referenced brands, product names, service names and

trademarks are the property of their respective owners.

Nexperia HEF4528B

Dual monostable multivibrator

Please be aware that important notices concerning this document and the product(s)

described herein, have been included in section 'Legal information'.

For more information, please visit: http://www.nexperia.com

For sales office addresses, please send an email to: salesaddresses@nexperia.com

Date of release: 14 March 2017

Document identifier: HEF4528B

Contents

1 General description ............................................ 1

2 Features and benefits .........................................1

3 Ordering information .......................................... 1

4 Functional diagram ............................................. 2

5 Pinning information ............................................ 2

5.1 Pinning ............................................................... 2

5.2 Pin description ................................................... 3

6 Functional description ........................................3

7 Limiting values ....................................................4

8 Recommended operating conditions ................ 4

9 Static characteristics .......................................... 5

10 Dynamic characteristics .....................................6

10.1 Waveforms and test circuit ................................ 8

11 Application information ....................................10

12 Package outline .................................................11

13 Abbreviations .................................................... 12

14 Revision history ................................................ 12

15 Legal information .............................................. 13

Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

NXP:

HEC4528BT,112 HEC4528BT,118 HEF4528BT/AUJ HEF4528BT-Q100J