G2A-432AN-US-DC12 - Omron Automation and Safety

http://www.ia.omron.com/ 1

Power Relay

G2A

Highly Reliable, 4-pole Miniature Relay Ideal

for Sequence Control

• Card lift-off employed for greater life and stable quality.

• Long endurance and stable quality are assured by card lift-off

system.

• Mounting interchangeability with MY-series Relays.

• Operation indicator mechanism incorporated for at-a-glance

monitoring of ON/OFF operation. In addition, a built-in operation

indicator model is also included in this Relay Series.

Ordering Information

Model Number Legend

1. Number of Poles and Contact Form

4: 4PDT

2. Contact Type

3: Crossbar bifurcated

3. Enclosure Construction

2: Casing

4. Terminal Shape

A: Plug-in

1P: PCB

5. Safety Breaking Mechanism

None: No

Y: Arc barrier

6. Special Element

None: Standard

D: Built-in diode

N: Built-in operation indicator

N1: Built-in operation indicator and diode

US: UL-approved

Note: 1. The coil of the G2A-432A-N1 or a built-in diode model operates with DC only.

2. The G2A Series include the G2A-434A Power Relay and G2AK Latching Relay. Refer to G2A-434 and G2AK for details.

3. Built-in indicator models satisfying international standards are available. Contact your OMRON representative for details.

Classification Plug-in terminals/Solder terminals PCB terminals

Standard model G2A-432A G2A-4321P

Arc barrier equipped model G2A-432AY ---

Built-in diode model G2A-432A-D G2A-4321P-D

Built-in operation indicator model G2A-432A-N ---

Built-in operation indicator and diode model G2A-432A-N1 ---

UL-

approved

model

Standard model G2A-432A-US G2A-4321P-US

Arc barrier equipped model G2A-432AY-US ---

Rated coil voltage

Note: 1. When placing your order, add the coil voltage rating listed in the specifications to the model number as shown below.

Example: G2A-432A 100/110 VAC

2. Built-in diode model and the operating coil of the G2A-432A-N1 are available only with DC ratings.

3. The Latching Relay (G2AK) and Fully sealed Relay (G2A-434A) developed based on the G2A are also available in this se-

ries.

G2A-@@@@@-@

1 2 3 4 5 6

http://www.ia.omron.com/ 2

G2A

■Relays Other than Standard Models

■Accessories

Sockets

Note: With monitor terminal.

Relay Hold-down Clips Socket Mounting Plates

Specifications

■Coil Ratings

The rated currents for some of the built-in operation indicator models differ from the values given in this table. Refer to note 5 below.

Note: 1. The rated current and coil resistance are measured at a coil temperature of 23°C with tolerances of +15%/–20% for AC rated current and

±15% for DC coil resistance.

2. The AC coil resistance and coil inductance values are for reference only.

3. Performance characteristic data is measured at a coil temperature of 23°C.

4. The maximum voltage is one that is applicable instantaneously to the Relay coil at an ambient temperature of 23°C and not continuously.

5. For built-in operation indicator models rated at 6, 12, and 24 VDC, add an LED current of approx. 5 mA to the rated currents.

Arc barrier equipped Built-in diode Built-in operation indicator

G2A-432AY G2A-432A-D G2A-432A-N

The arc barrier equipped model is

a relay designed to prevent arc

short-circuiting between phases

and can be used in a circuit which

has potential difference between

phases. The switching power of

such a circuit with potential differ-

ence must be limited to less than

1/2 the rated load when using this

Relay.

The built-in diode model is a relay

which incorporates a diode for ab-

sorption of the reverse voltage

that may be generated when the

coil is de-energized. Because the

release time of this model is long-

er than the standard model, pay

adequate attention to this point in

designing a circuit. Also, pay at-

tention to the + polarity of the coil.

The reverse-breakdown voltage

of the diode is 1,000 V.

The built-in operation indicator

model has a newly added opera-

tion indicator to the conventional

operation indication mechanism

and facilitates operation monitor-

ing without being affected by am-

bient illumination.

With the -N model (rated at 16,

12, 24, and 48 VDC) and -N1

model rated at 6, 12, 24, 48, and

100 VDC), pay attention to the +

polarity of the coil.

Track mounting Front-connecting

Socket

Screw terminals Solder terminals Wire-wrap terminals PCB

terminals

Without Hold-

down Clip

With Hold-down

Clip

Without Hold-

down Clip

With Hold-down

Clip

PYF14A PYF14(-E), PYF14A-

TU, PYF14T

PY14, PY14-3

(see note)

PY14-Y2 PY14QN(2) PY14QN(2)-Y2 PY14-0,

PY14-02

For Front-connecting Socket PYC-A2

For Back-connecting Socket PYC-3/PYC-5

For Socket Mounting Plate PYC-2

For one Socket PYP-1

For 18 Sockets PYP-18

For 36 Sockets PYP-38

Rated

voltage

Rated current Coil

resistance

Coil inductance (ref.

value)

Must

operate

Must

release

Max.

voltage

Power

consumption

50 Hz 60 Hz Armature

OFF

Armature

% of rated voltage

6 VAC 295 mA 233 mA 8.9 Ω0.048 H 0.065 H 80 % max. 30 % min. 110 % Approx. 1.4 VA

12 VAC 148 mA 117 mA 34 Ω0.166 H 0.257 H

24 VAC 73 mA 58 mA 136 Ω0.691 H 1.04 H

50 VAC 35 mA 28 mA 530 Ω3.08 H 4.53 H

100/

110 VAC

17.7/

21.4 mA

14/

16.8 mA

2,200 Ω12.42/

12.38 H

18/16.4 H

200/

220 VAC

8.9/

10.8 mA

7/8.4 mA 8,800 Ω42.2/

41.8 H

72/65.5 H

6 VDC 176 mA 34 Ω0.14 H 0.26 H 10 % min. 110 % Approx. 1.1 W

12 VDC 88 mA 136 Ω0.6 H 1.0 H

24 VDC 45 mA 530 Ω2.7 H 4.6 H

48 VDC 22 mA 2,200 Ω11 H 19 H

100 VDC 11.4 mA 8,800 Ω43 H 73 H

http://www.ia.omron.com/ 3

G2A

■Contact Ratings

■Characteristics

Note: 1. The data shown above are initial values.

2. The contact resistance was measured with 0.1 A at 5 VDC using the voltage drop method.

3. The operate or release time was measured with the rated voltage imposed with any contact bounce ignored at an ambient temperature

of 23°C.

4. The insulation resistance was measured with a 500-VDC megger applied to the same places as those used for checking the dielectric

strength.

5. The electrical endurance was measured at an ambient temperature of 23°C.

6. This value was measured at a switching frequency of 60 operations per minute.

■Approved by Standards

UL508 (File No. E41515)

Load Resistive load (cosφ = 1) Inductive load (cosφ = 0.4) (L/R = 7 ms)

Contact type Crossbar bifurcated

Contact material Movable: AgAu-clad AgPd

Fixed: AgPd

Rated load 0.3 A at 110 VAC

0.5 A at 24 VDC

0.2 A at 110 VAC

0.3 A at 24 VDC

Rated carry current 3 A

Max. switching power 250 VAC, 125 VDC

Classification Standard/Acr barrier equipped/Built-in operation

indicator models (G2A-@-N)

Built-in diode/Built-in operation indicator models

(G2A-@-N1)

Contact resistance

(see note 2)

100 mΩ max.

Operate time (see note 3) 15 ms max.

Release time (see note 3) 15 ms max. 30 ms max.

Max. operating frequency Mechanical: 18,000 operations/hour

Electrical: 1,800 operations/hour (under rated load)

Insulation resistance

(see note 4)

100 MΩ min. (at 500 VDC)

Dielectric strength 1,500 VAC, 50/60 Hz for 1 min between coil and contacts and contacts of different polarities (700 VAC be-

tween contacts of same polarity)

Vibration resistance Destruction: 10 to 55 to 10 Hz, 0.75 mm single amplitude (1.5 mm double amplitude)

Malfunction: 10 to 55 to 10 Hz, 0.5 mm single amplitude (1.0 mm double amplitude)

Shock resistance Destruction: 1,000 m/s2

Malfunction: 100 m/s2

Error rate (level P)

(Reference value)

(see note 6)

1 mA at 100 mVDC

Endurance Mechanical: 100,000,000 operations min. (at operating frequency of 18,000 operations/hour)

Electrical: 5,000,000 operations min. (under rated load and at operating frequency of

1,800 operations/hour) (see note 5)

Ambient temperature Operating:–10°C to 40°C (with no icing or condensation)

Ambient humidity Operating:5% to 85%

Weight Approx. 38 g

Model Coil ratings Contact ratings

G2A-@-US 6 to 120 VAC

6 to 120 VDC

1 A 120 VAC (resistive load)

1 A 30 VDC (inductive load)

http://www.ia.omron.com/ 4

G2A

Engineering Data

Maximum Switching Power Endurance

Switching current (A)

Switching voltage (V) Switching current (A)

DC resistive load

AC resistive load

DC inductive load

L/R = 7 ms

24-VDC resistive load

24-VDC

inductive load

L/R = 7 ms

110-VAC

resistive load

110-VAC

inductive load

cosφ = 0.4

AC inductive load

(cosφ = 0.4)

100

500

1,000

5,000

10,000

Endurance (x10 operations)

Ambient Temperature vs.

Must-operate and Must-release

Voltage

G2A AC (60 Hz)

Must-operate and reset voltage (%)

Number of Relays: 5

Must-operate

voltage

Must-release

voltage

Ambient temperature (°C)

G2A DC

Must-operate and reset voltage (%)

Number of Relays: 5

Must-operate

voltage

Must-release

voltage

Ambient temperature (°C)

Ambient Temperature vs.

Coil Temperature Rise

G2A 110 VAC (50 Hz)

Coil temperature rise ( C)

Contact

carry current

Number of Relays: 5

Ambient temperature (°C)

G2A DC

Coil temperature rise ( C)

Contact

carry current

Number of Relays: 5

Ambient temperature (°C)

Malfunctioning Shock

G2A-432A 100/110 VAC

Not energized

Energized

Shock direction Unit: m/s

Number of samples = 5

Measurement conditions: Impose a shock of

100 m/s

in the ±X, ±Y, and ±Z directions three

times each with the Relay energized and not

energized to check the shock values that cause

the Relay to malfunction.

http://www.ia.omron.com/ 5

G2A

Coil Self-load Life Curve

(Unit: mA)

Contact Reliability

(JIS C 4530 Allen-Bradley Test Circuit)

Contact resistance (m )

Carry contact

Break contact

Make contact

Self-holding

contact

Operations (x 104)

24 VDC

Contact resistance (m )

Carry contact

Break contact

Make contact

Self-holding

contact

Operations (x 104)

Contact Reliability

(Improved Allen-Bradley Test Circuit)

Contact load: 1 mA at 5 VDC (resistive load)

Failure criterion contact resistance: 100 Ω

Contact resistance (m )

Carry contact

Break contact

Make contact

Self-holding

contact

Operations (x 104)

λ60 = 0.00153 × 10−6

100 VAC

λ60 = 0.00153 × 10−6λ60 = 0.00153 × 10−6

Model Specifications No. of Relays

123510

G2A-432A 100 VAC, 60 Hz 14 28 42 70 140

24 VDC 45 90 135 225 450

Life (x10 )

Number of Relays

100 VAC

24 VDC

Relay Mounting Adjacent Distance vs. Coil Temperature Rise

G2A-432A 24 VDC

Coil temperature rise ( C)

Condition: The

saturated coil

temperature is

measured with rated

coil voltage

(24 VDC) imposed.

Relay

mounting

position Upper

Lower

Average of No. 1 and No. 3

Average of No. 4. and No. 6

Average of No. 7 and No. 9

Mounting adjacent distance l (mm)

Coil temperature rise ( C)

Condition: The saturated

coil temperature is

measured with rated

voltage (110 VAC) at 60 Hz

imposed.

Relay

mounting

position

Average of No. 1 and No. 3

Average of No. 4. and No. 6

Average of No. 7 and No. 9

Mounting adjacent distance l (mm)

Upper

Lower

110 VAC

http://www.ia.omron.com/ 6

G2A

Accessories (Order Separately)

Connecting Sockets

Note: 1. The PYF@A-TU is a high-humidity relay with nickel-plated rustproof terminal screws that are the same as the PYF@A in size.

2. The PYF14T is slightly different from the PYF14A(-TU) in shape and size.

3. The PYF@A-E is a finger-protection model, for which round terminals are not available. Use fork-shaped terminals or equivalent ones

instead.

Relay Hold-down Clips

Note: When using a Relay Hold-down Clip for the built-in operation indicator model, use of the PYC-A2 or PYC-5, which allows easy viewing of

the indicator, is recommended.

Front-connecting

Socket

Back-connecting Socket

DIN track/screw

mounting

Solder terminals Wire-wrap terminals PCB terminals

PYF14A(-E)

PYF14A-TU

PYF14T

PY14

PY14-Y3 PY14-Y2

(with Relay

Hold-down Clip)

PY14QN(2) PY14QN(2)-Y2

(with Relay

Hold-down Clip)

PY14-0 PY14-02

PY14-3 Back-connecting Socket

(with check terminals for operation monitoring)

Check terminal for operation monitoring

Built-in operation monitoring lamp possible

Panel Cutout

38.5

29 (7.7)

0.334.5±0.4

2-dia. hole

Three, 1.2-dia. holes

Shorting lead

78+0.3

−0

36+0.3

−0

77.5+0

−0.4

Relay Mounting Height with Socket

With Front-connecting Socket With Back-connecting Socket

Note: PYF14A can be used for both DIN

track mounting and screw mounting.

76.5

45.5

G2A G2A

PYF14A

PY14 Socket

For Front-connecting Socket For Back-connecting Socket For Socket mounting plate

PYC-A2 PYC-3 PYC-5 PYC-2

http://www.ia.omron.com/ 7

G2A

Dimensions

Note: 1. All units are in millimeters unless otherwise indicated.

2. Dimensional tolerances are ±0.1 mm.

Built-in Operation Indicator Models

Color of operation indicator

AC model: Red

DC model: Green

Note: Do not reverse the polarity of the coil of DC Relays that have a built-in indicator or diode.

G2A-432A-N

Solder Terminal Models PCB Terminal Models Mounting Holes on PCB

(Bottom View)

Terminal Arrangement/Internal Connections

(Bottom View)

Standard Models Make-before-break

Contact Models

Arc Barrier Equipped Models Built-in Diode Models

4.1

12.65

4.4

Fourteen, 1.5-dia. holes

4.4

13.2

6.35

7.3

0.5

21.5 max.

28.5 max.

1.8

42.5 max. 4

0.5

2.6

21.5 max.

0.5

28.5 max.

Fourteen, 1.2-dia. 1.2 holes x 3 elliptic holes

1.8

42.5 max. 5.4

2.6

100/110, 200/220 VAC

6, 12, 24, 50 VDC

6, 12, 24 VDC 48, 100 VDC

G2A-432A-N1

6, 12, 24 VDC 48, 100 VDC

http://www.ia.omron.com/ 8

G2A

Safety Precautions

Refer to Safety Precautions for All Relays.

A DC coil model with a built-in indicator or built-in diode has coil

polarity. Be sure to wire the terminals correctly, otherwise the diode

may be broken or the operating indicator may not be lit. Furthermore,

as a result of the short-circuiting of the built-in diode, the devices in

the circuit may be damaged.

Socket Mounting Plates (t = 1.6 mm)

Use any of these plates when mounting two or more Sockets side-by-side

PYP-1 (for Single Socket Mounting) PYP-18 (for Mounting 18 Sockets) PYP-36 (for Mounting 36 Sockets)

Note: PYP-18 and PYP-36 can be cut to a desired length for

mounting less than 18 or 36 Sockets, respectively.

Two, 3.4-dia. holes

Square

hole

492

72 elliptic holes 21.6 4.5

3.4

13.1

27.4 x 17 = 465.8±0.6

±0.15

42±0.1

492

72 elliptic holes 21.6 4.5

3.4

13.1

R1.7

86.4

21.6

13.1

27.4 x 17 = 465.8±0.6

27.4

±0.15

39.7±0.2

21.4+0.2

−0

R1.7

27.4

27.4 x 17 = 465.8±0.6

In the interest of product improvement, specifications are subject to change without notice.

ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.

To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.

http://www.ia.omron.com/ C-1

Safety Precautions for All Relays

Refer to the Safety Precautions section for each Relay for specific precautions applicable to that Relay.

■Precautions for Safe Use

Observe the following precautions to

ensure safety.

•Do not touch the terminal section (charged section) of the Relay or

Socket while power is being supplied. Electric shock may occur.

•Never use a Relay for a load that exceeds the contact ratings of the

Relay, such as the switching capacity. Doing so may result in

reducing Relay performance for insulation failure, contact welding,

and contact faults, and might even result in burning or other

damage to the Relay itself.

•Do not drop the Relay or dismantle it. Doing so may reduce Relay

performance and might even result in burning or other damage to

the Relay itself.

•Relay durability is greatly affected by the switching conditions.

Always test the Relay under actual application conditions to confirm

applicability and use the Relay only for the number of switching

operations that will not affect performance. Continued application of

a Relay with reduced performance may result in insulation failure

between circuits or in burning in the Relay itself.

•Do not apply an overvoltage or incorrect voltage to the coil, and do

not wire the terminals incorrectly. Incorrect application may prevent

the Relay from performing its designed function, may affect

external circuits, and may even result in burning or other damage to

the Relay itself.

•Do not use the Relay in atmospheres containing inflammable or

explosive gases. Switching arcs or Relay heating may result in fire

or explosion.

•Wire the Relay correctly according to the Precautions for Correct

Use when performing wiring or soldering. If the Relay is used with

wiring or soldering that is defective, abnormal heating while power

is supplied may result in burning.

Relay Application

•Before actually using the Relay, perform all possible tests to

confirm applicability. Unexpected trouble can occur in actual

operation that would not be anticipated in theoretical planning.

•Unless otherwise specified, all ratings and performances given in

this catalog are for JIS C5442 standard test conditions

(temperature: 15 to 35°C, humidity: 25% to 75%, pressure: 86 to

106 kPa). When testing the Relay in the actual application, use the

operating environment that will exist in actual applications along

with the actual load conditions.

•All reference data provided in this catalog are from measurement

samples taken from production lines and represented in graph

form. Actual values will depend on the application.

•All ratings and performances given in this catalog are from

independent tests. Values will vary for different combinations of

ratings and performances.

■Precautions for Correct Use

Refer to Technical Guide for General-purpose Relays.

In the interest of product improvement, specifications are subject to change without notice.

2007.3

OMRON Corporation

Industrial Automation Company

In the interest of product improvement, specifications are subject to change without notice.

Read and Understand This Catalog

Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or

comments.

Warranty and Limitations of Liability

WARRANTY

OMRON's exclusive warranty is that the products are free from defects in materials and workmanship for a period of one year (or other period if

speciﬁ ed) from date of sale by OMRON.

OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, REGARDING NON-INFRINGEMENT, MERCHANTABILITY, OR

FITNESS FOR PARTICULAR PURPOSE OF THE PRODUCTS. ANY BUYER OR USER ACKNOWLEDGES THAT THE BUYER OR USER ALONE HAS

DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. OMRON DISCLAIMS ALL OTHER

WARRANTIES, EXPRESS OR IMPLIED.

LIMITATIONS OF LIABILITY

OMRON SHALL NOT BE RESPONSIBLE FOR SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS, OR COMMERCIAL

LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED ON CONTRACT, WARRANTY, NEGLIGENCE, OR

STRICT LIABILITY.

In no event shall responsibility of OMRON for any act exceed the individual price of the product on which liability is asserted.

IN NO EVENT SHALL OMRON BE RESPONSIBLE FOR WARRANTY, REPAIR, OR OTHER CLAIMS REGARDING THE PRODUCTS UNLESS

OMRON'S ANALYSIS CONFIRMS THAT THE PRODUCTS WERE PROPERLY HANDLED, STORED, INSTALLED, AND MAINTAINED AND NOT

SUBJECT TO CONTAMINATION, ABUSE, MISUSE, OR INAPPROPRIATE MODIFICATION OR REPAIR.

Application Considerations

SUITABILITY FOR USE

OMRON shall not be responsible for conformity with any standards, codes, or regulations that apply to the combination of products in the customer's

application or use of the product.

At the customer's request, OMRON will provide applicable third party certiﬁ cation documents identifying ratings and limitations of use that apply to the

products. This information by itself is not sufﬁ cient for a complete determination of the suitability of the products in combination with the end product,

machine, system, or other application or use.

The following are some examples of applications for which particular attention must be given. This is not intended to be an exhaustive list of all possible

uses of the products, nor is it intended to imply that the uses listed may be suitable for the products:

• Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this catalog.

• Nuclear energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles, safety

equipment, and installations subject to separate industry or government regulations.

• Systems, machines, and equipment that could present a risk to life or property.

Please know and observe all prohibitions of use applicable to the products.

NEVER USE THE PRODUCTS FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE

SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCT IS PROPERLY RATED AND

INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.

Disclaimers

CHANGE IN SPECIFICATIONS

Product speciﬁ cations and accessories may be changed at any time based on improvements and other reasons.

It is our practice to change model numbers when published ratings or features are changed, or when signiﬁ cant construction changes are made.

However, some speciﬁ cations of the product may be changed without any notice. When in doubt, special model numbers may be assigned to ﬁ x

or establish key speciﬁ cations for your application on your request. Please consult with your OMRON representative at any time to conﬁ rm actual

speciﬁ cations of purchased product.

DIMENSIONS AND WEIGHTS

Dimensions and weights are nominal and are not to be used for manufacturing purposes, even when tolerances are shown.

ERRORS AND OMISSIONS

The information in this catalog has been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical,

typographical, or proofreading errors, or omissions.

PERFORMANCE DATA

Performance data given in this catalog is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent

the result of OMRON’s test conditions, and the users must correlate it to actual application requirements. Actual performance is subject to the OMRON

Warranty and Limitations of Liability.

PROGRAMMABLE PRODUCTS

OMRON shall not be responsible for the user's programming of a programmable product, or any consequence thereof.

This catalog shall not be copied for sales or promotions without permission.

This catalog is protected by copyright and is intended solely for use in conjunction with the product. Please notify us before copying or reproducing this

catalog in any manner, for any other purpose. If copying or transmitting this catalog to another, please copy or transmit it in its entirety.