DOCUMENT NUMBER ACS-21B3-01 SMU-2PH2 Series MU VERTICAL DUPLEX Housing for 2.0mm TECHNICAL SPECIFICATIONS Seiko Instruments Inc. Network Components Business 8, Nakase 1-Chome Mihama-ku, Chiba-shi, Chiba-ken 261-8507 JAPAN Telephone: +81-43-211-1211 Facsimile: +81-43-211-8039 SMU-2PH2 Series MU VERTICAL DUPLEX HOUSING for o 2.0mm TECHNICAL SPECIFICATIONS Document Number ACS-21B3-01 ACS-21B3-01 January 2002 Copyright 2002 by Seiko Instruments Inc. All right reserved. The information contained herein shall not be reproduced or disclosed to any third party without the express written consent of SII. The Specifications contained herein are subject to change without notice. SII is a trademark of Seiko Instruments Inc. Please address any questions, comments, and suggestions to: Seiko Instruments USA Inc. Seiko Instruments GmbH Electronics Components Division 2990 West Lomita Boulevard Torrance, CA 90505, U.S.A. Phone: +1-310-517-7780 Facsimile: +1-310-517-7792 OFC Division Siemensstrae 9b D-63263 Neu-Isenburg, Germany Phone: +49-6102-297-0 Facsimile: +49-6102-297-211 Seiko Instruments (H.K.) Ltd. Seiko Instruments Taiwan Inc. Sales Department 4th & 5th Floor, Wyler Center 2 200 Tai Lin Pai Road, Kwai Chung N.T., Kowloon, Hong Kong Phone: +852-2421-8611 Facsimile: +852-2480-5479 Sales Department 4F, No.40, Sec. 2, Min Chuan E. Rd., Taipei 104, Taiwan, R.O.C. Phone: +886-2-2563-5001 Facsimile: +886-2-2521-9519 Seiko Instruments Singapore pte. Ltd. Component Sales Department 2, Marsiling Lane, Singapore, 739144, Singapore Phone: +65-269-1370 Facsimile: +65-269-9729 ii TABLE OF CONTENTS Section 1. PROVISION 1.1 Application limit 2. PARTS NUMBER 3. GENERAL SPECIFICATIONS 3.1 Parts and Materials 3.2 Physical Dimensions 3.3 General Tolerances 4. PACKING 5. SHIPPING INSPECTION Page 1 1 1 2 2 2 2 3 3 Table Table 1 Table 2 Table 3 Parts Number Parts and Materials General Tolerance 1 2 2 Figure Figure 1 Figure 2 SMU-2PH2 Housing i Cap 3 4 iii iv 1. PROVISION 1.1 Application Limit These specifications apply to the SMU-2PH2 MU vertical duplex Housing supplied by SII. 2. PARTS NUMBER Parts number of the adaptor is shown in Table 1. Table 1 MODEL Number SMU-2PH2 Parts Number TYPE Number 604B 1 3. GENERAL SPECIFICATIONS 3.1 Parts and Materials Parts and the materials are shown in Table 2. Table 2 No. c d e f g h i Part Name Grip Plug frame Spring Stop ring Crimping Hood Cap Qty 1 2 2 2 2 2 2 Parts and Materials Material Notes Brown, UL94V-0 White,UL94V-0 ----------Nickel plating Nickel plating Blue,UL94V-0 White, UL94HB PBT GF PBT GF Stainless Steel Brass Brass TPE PP 3.2 Physical Dimensions Figure 1 shows the SMU-2PH2 Housing. Figure 2 shows the part dimensions. In accordance with IEC 61754-6 Fibre optic connector interfaces Part 6: Type MU connector family In accordance with JIS C 5983 F14 Type connectors for fiber cables 3.3 General Tolerances Permissible deviation in dimensions without tolerance indication is in accordance with JIS B 0405 class m, as shown in Table 3. Table 3 General tolerance (JIS B 0405 class m) Basic size step [mm] Over Under 0.5 3 3 6 6 30 30 120 Permissible deviation [mm] 0.1 0.1 0.2 0.3 4. PACKING The product is packed to prevent damage during shipment. 5. SHIPPING INSPECTION Insertion loss of the adaptor is inspected before shipping. 2 Unit: mm Figure 1 SMU-2PH2 Housing 3 Unit: mm Figure 2 4 i Cap