ELECTRICAL SOLUTIONS A. System Overview Controlled Cycle Crimping Tools * Specialty crimping tools for fully insulated right angle disconnects and heat shrink insulated terminals, disconnects, and splices B1. Cable Ties * Controlled cycle mechanism assures high quality, consistent terminations Part Number CT-300-1 Part Description Crimps Panduit #22 - 14 AWG fully insulated right angle disconnects (DNFR-FIB series). CT-310 Crimps Panduit #22 - 10 AWG heat shrink insulated terminals, disconnects, and splices. Std. Pkg. Qty. 1 1 CT-1002 Part Number CT-1002 * Ergonomic tool design assures operator comfort, safety, and performance * Multi-position locator facilitates a high quality repeatable crimp Part Description Controlled cycle crimp tool with trapezoid profile for #26 - 10 AWG (0.14 - 6.0mm) insulated and non-insulated single wire ferrules and #22 - 12 AWG (0.50 - 4.0mm) insulated twin wire ferrules. C2. Surface Raceway Std. Pkg. Qty. 1 CT-1003 Controlled cycle crimp tool with trapezoid profile for #22 - 8 AWG (0.50 -10.0mm) insulated and non-insulated ferrules and #22 - 10 AWG (0.50 - 6.0mm) insulated twin wire ferrules. 1 CT-1004 Controlled cycle crimp tool with trapezoid profile for #8 - 6 AWG (10.0 - 16.0mm) insulated and non-insulated ferrules and #10 AWG (6.0mm) insulated twin wire ferrules. 1 CT-1005 Controlled cycle crimp tool with trapezoid profile for #4 - 2 AWG (26.0 - 35.0mm) insulated and non-insulated ferrules. 1 CT-1006 Controlled cycle crimp tool with trapezoid profile for #1 AWG (50.0mm) insulated and non-insulated ferrules. 1 CT-1104 Controlled cycle crimp tool with square profile for #8 - 6 AWG (10.0 - 16.0mm) insulated and non-insulated ferrules and #10 AWG (6.0mm) insulated twin wire ferrules. 1 CT-1123 Controlled cycle crimp tool with square profile for #26 - 8 AWG (0.14 - 10.0mm) insulated and non-insulated ferrules and #22 - 12 AWG (0.50 - 4.0mm) insulated twin wire ferrules. 1 CT-1003 CT-1004 B3. Stainless Steel Ties C1. Wiring Duct Controlled Cycle Crimping Tools - Ferrule End Sleeve * Specifically designed for the installation of Pan-Term (R) Ferrules * Controlled cycle mechanism assures high quality, consistent terminations B2. Cable Accessories C3. Abrasion Protection C4. Cable Management D1. Terminals D2. Power Connectors D3. Grounding Connectors E1. Labeling Systems CT-1005 E2. Labels E3. Pre-Printed & Write-On Markers CT-1006 E4. Permanent Identification E5. Lockout/ Tagout & Safety Solutions CT-1104 F. Index CT-1123 For technical assistance in the U.S., call 866-405-6654 (outside the U.S., see inside back cover for directory) D1.85 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Panduit: CT-310 CT-1003 CT-1002 CT-1004 CT-1006 CT-1123 CT-1005 CT-1104