FTR-P4 SERIES COMPACT POWER TWIN RELAY 1POLE X 2, H-BRIDGE-- 25 A FOR AUTOMOTIVE APPLICATIONS FTR-P4 Series RoHS compliant n FEATURES l Compact for high density packaging. (60% volume of previous generation FBR512). l High contact capacity with proven contact material. (100,000 operations, 14 V, 25 A achieved, even with reduced size). l Coil power savings (600mW nominal achieved with state-of-the-art magnetic analysis/design). l 125C version is available. l Ease of PCB layout (all terminals on perimeter, coil and contact terminals separated). l Pin compatible with low acoustic noise relay, FTR-P2. l Optional over-voltage circuit breaking capability (0.6mm gap, contact our representative). l Packaging for auto-insertion (tube packing, 30 relays/tube). l RoHS compliant since date code: 0624 Please see page 8 for more information n ORDERING INFORMATION [Example] FTR-P4 (a) C (b) N 012 W1 *** (c) (d) (e) (f) (a) Series Name FTR-P4 Series (b) Contact Arrangement C : 1 Form C x 2 (H-Bridge) (c) Contact Gap N P : 0.3mm gap : 0.6mm gap (d) Nominal Coil Voltage 009 010 012 : 9VDC : 10VDC : 12VDC (e) Contact Material W1 : Silver-tin oxide-indium (f) Custom Designation Nil -01 : Standard (85C) : High temperature (125C) Note: The part number stamped on the relay cover does not include "FTR". Example: Ordering part number: FTR-P4CN012W1 Stamped on part number: P4CN012W1 n TYPICAL APPLICATIONS Power window Door lock Power seat Sun roof Tilt steering Retractable antenna FTR-P4 SERIES n SPECIFICATIONS Specification Item Contact Standard High Temperature versio n Arrangement 1 form C x 2 (H-Bridge ) Material Silver-tin oxide-indiu m Voltage Drop (Resistance) Maximum 100 mV (at 1 A 12 VDC) Rating 25 A at 14 VDC (locked motor load) Maximum Carrying Current 25 A / 1 hour (20 C, 100% rated coil voltage) Maximum Inrush Current (Reference) 35 A Maximum Switching Current (Reference) 35 A at 16 VDC Minimum Switching Load*1 (Reference) 1 A, 6 VD C Coil Timing Values Life Operating Temperature Range -40 C to +85 C (no frost ) -40 C to +125 C (no frost ) Storage Temperature Range -40 C to+100 C (no frost) Operate (at nominal voltage) Maximum 10ms (not including bounce) Release (at nominal voltage) Maximum 5ms (not including bounce, no diode) Maximum 15ms (not including bounce, with diode) Mechanical 10 x 1 06 operations minimum Electrical 100 x 103 operations minimum 14 VDC, 25 A (locked motor load) (1 operation = 1 forward, 1 reverse) Vibration Resistance Other Shock Resistance Operational 10-55Hz, 1.5mm double amplitude (=9.13G @ 55Hz) 55-100Hz, 45m/sec2 (4.6G) Operational 100 m/ s2 minimum (10G) Endurance 1, 000 m/ s2 minimum (100G) Insulation Resistance (initial) 100M ohms @500 VA C Dielectric Withstanding Voltage (initial) 500 VA C Weight -40 C to +125 C (no frost) Approximately 9.0 g *1 Values when switching a resistive load at normal room temperature and humidity and in a clean environment. The minimum switching load varies with the switching frequency and operating environment. FTR-P4 SERIES n COIL DATA CHART FTR-P4 Series (0.25mm contact gap) Model Nominal Coil Voltage Coil Resistance (10% at 20C) Must Operate Voltage Must Release Voltage (at 20C) Coil Thermal Power at Resistance Nominal (approx.) Voltage FTR-P4-CN009W1 ( ) 9VDC 135 5.5VDC (at 20C) 6.9VDC (at 85C) 0.75VDC 0.6W 73C/W FTR-P4-CN010W1 ( ) 10VDC 167 6.3VDC (at 20C) 7.9VDC (at 85C) 0.9VDC 0.6W 73C/W FTR-P4-CN012W1 ( ) 12VDC 240 7.3VDC (at 20C) 9.2VDC (at 85C) 1.0VDC 0.6W 73C/W Note: ( ) is "Nil" or "-01" FTR-P4 Series (0.6mm contact gap) Model Nominal Coil Voltage Coil Resistance (10% at 20C) Must Operate Voltage Must Release Voltage (at 20C) Coil Power at Nominal Voltage Thermal Resistance (approx.) FTR-P4-CP009W1 9VDC 100 5.5VDC (at 20C) 6.9VDC (at 85C) 0.75VDC 0.8W 73C/W FTR-P4-CP010W1 10VDC 125 6.3VDC (at 20C) 7.9VDC (at 85C) 0.9VDC 0.8W 73C/W FTR-P4-CP012W1 12VDC 167 7.3VDC (at 20C) 9.2VDC (at 85C) 1.0VDC 0.8W 73C/W FTR-P4 SERIES n CHARACTERISTIC DATA 1. LIFE TEST (EXAMPLES) M 100 80 60 OPERATE 40 20 RELEASE 0 20 50 100 * Change in contact resistance 10 sec 0A 0.25 sec 0.25 sec 5 sec * 1 operation = 1 forward and 1 reverse Contact Resistance (m) 0A 1000 (Measured at 6 VDC, 1A wet) 1000 (RL-2) 25 A 500 Number of operations* (x 103 times) Initial * Current wave form (RL-1) 25 A * Change of operate and release voltage Percent of nominal coil voltage (%) * Test item 14 V DC-25 A locked motor 100K operations* minimim 0.25 seconds ON, 9.75 seconds OFF 100 10 1 20 Initial 50 100 500 Number of operations* (x 103 times) 1000 FTR-P4 SERIES 3. COIL TEMPERATURE RISE 2. MAXIMUM BREAK CAPACITY 50 Motor load lock 25 20 5 FTR-P4CN FTR-P4CP 2 0 100 5 20 25 30 35 40 50 0.6 W Contact carrying current: 20A 80 60 0.6 W Contact carrying current: 10A 0.6 W 40 Contact carrying current: 0.0A 20 0 0 Ambient temperature: 20C 120 Coil temperature rise (degrees C) Switching current (A) 40 35 30 0 10 20 30 Applied time (minutes) Source voltage (VDC) Ratio of coil voltage to nominal voltage (%) 4. OPERATING COIL VOLTAGE RANGE 140 120 Continuous operating range at 10A carry current 100 80 60 Must 40 -30 -20 0 e oltag ate v -oper 20 40 60 80 100 Ambient temperature C FTR-P4 SERIES 5. VIBRATION RESISTANCE CHARACTERISTIC 5 100 Acceleration 50 Dual amplitude (mm) 1 0.5 0.1 0.01 44 m/s2 Range where chattering occurs Break contact Coil deenergized on X-axis On vehicle Electronic equipment Standard 10 10 50 100 500 1000 Frequency : 10~2000 Hz Acceleration : 100 m/s2 maximum Vibration direction : see drawing below Detection level : generation of 1 ms or longer contact opening Z FTR-P4 2000 X Y Frequency (Hz) 6. SHOCK RESISTANCE CHARACTERISTIC 1,000 Shock duration: 111 ms, half-sine wave Test condition: coil, energized and de-energized Impact direction: see drawing below Detection level : generation of 1ms or longer contact opening Y2 800 Shock level (m/s2) 600 Y1 400 Z2 X1 FTR-P4 200 X2 Z1 0 X1 X2 Y1 Y2 Impact direction Z1 Z2 : Break contact (coil de-energized) : Make contact (coil energized) n REFERENCE DATA 100 Operate Release Data: FTR-P4 Units: n = 100 80 Distribution (%) Distribution (%) 80 60 40 Data: FTR-P4 Units: n = 100 Operate Release 60 40 20 20 0 Operate and release time distribution 0 10 20 30 40 50 60 Ratio to rated voltage (%) 70 80 0 Contact resistance distribution 100 Data: FTR-P4 Units: n = 100 80 Distribution (%) Operating/release voltage distribution 100 60 40 20 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 6 6.5 7 Time (ms) 0 0 10 20 30 40 50 60 70 80 Contact resistance (m) FTR-P4 SERIES n DIMENSIONS AND SCHEMATICS Dimensions Recommended PCB hole layout and schematic (Bottom view) 7-o1.5 6 P4CN012W1 6 F&T 17.4+0.5 14.2+0.5 5 5 3.5+0.5 13.5+0.5 5 0.4 (1.2) 5.0 5.0 6.0 3-0.8 6.0 5.0 Unit: mm 3-0.25 4-1.0 4-0.4 n PRECAUTIONS Please refer to the Engineering Reference in our relay databook for general precautions. FTR-P4 SERIES RoHS Compliance and Lead Free Relay Information 1. General Information Relays produced after the specific date code that is indicated on each data sheet are lead-free now. Most of our signal and power relays are lead-free. Please refer to Lead-Free Status Info. (http://www.fujitsu.com/us/downloads/MICRO/fcai/relays/lead-free-letter.pdf) l Lead free solder paste currently used in relays is Sn-3.0Ag-0.5Cu. l All signal and most power relays also comply with RoHS. Please refer to individual data sheets. Relays that are RoHS compliant do not contain the 5 hazardous materials that are restricted by RoHS directive (lead, mercury, chromium IV, PBB, PBDE). l It has been verified that using lead-free relays in leaded assembly process will not cause any problems (compatible). l "LF" is marked on each outer and inner carton. (No marking on individual relays). l To avoid leaded relays (for lead-free sample, etc.) please consult with area sales office. l We will ship leaded relays as long as the leaded relay inventory exists. Note: Cadmium was exempted from RoHS on October 21, 2005. (Amendment to Directive 2002/95/EC) l 2. Recommended Lead Free Solder Profile Recommended solder paste Sn-3.0Ag-0.5Cu. l Reflow Solder condition Flow Solder condition: Pre-heating: Soldering: maximum 120C dip within 5 sec. at 260C solder bath Solder by Soldering Iron: Soldering Iron Temperature: maximum 360C Duration: maximum 3 sec. We highly recommend that you confirm your actual solder conditions 3. Moisture Sensitivity l Moisture Sensitivity Level standard is not applicable to electromechanical realys. 4. Tin Whisker l Dipped SnAgCu solder is known as low risk tin whisker. No considerable length whisker was found by our in house test. FTR-P4 SERIES Fujitsu Components International Headquarter Offices Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141 8630, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: promothq@fcl.fujitsu.com Web: www.fcl.fujitsu.com Europe Fujitsu Components Europe B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: info@fceu.fujitsu.com Web: emea.fujitsu.com/components/ North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: components@us.fujitsu.com Web: http://www.fujitsu.com/us/services/edevices/components/ Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #01-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 6375-8560 Fax: (65) 6273-3021 Email: fcal@fcal.fujitsu.com Web: http://www.fujitsu.com/sg/services/micro/components/ (c)2009 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective owners. Fujitsu Components America or its affiliates do not warrant that the content of datasheet is error free. In a continuing effort to improve our products Fujitsu Components America, Inc. or its affiliates reserve the right to change specifications/datasheets without prior notice. Rev. March 4, 2009.