M for 2 0% tol . MIL-PRF-49470 LOW PROFILE REDUCED HEIGHT-LARGER CASE SIZE MIL-PRF-49470 Cap Case (change K to M for 20% tol.) F Cap Tol. inches (mm) 10% Height A Presidio Part No. MIL-PRF-49470 (change K to M for 20% tol.) (change K to M for 20% tol.) 4.7 5.6 4 4 M49470 M49470 M49470 M49470 * * * * 15 47 56 68 3 2 2 2 M49470 X 01 826 K A * M49470 X 01 107 K A * 82 100 2 2 X X X X 01 01 01 01 156 476 566 686 K K K K A A A A MIL-PRF-49470 Cap Case (change K to M for 20% tol.) F (6.10) (6.10) (6.10) (6.10) .360 (9.14) .360 (9.14) .480 (12.19) Height A inches (mm) HR S 2 05 BX 475 K 2 * 4 10% 10% 10% HR S 2 05 BX 565 K 2 * 4 HR S 2 13 BX 156 K 2 * 10 HR S 2 15 BX 476 K 2 * 15 10% 10% 10% 10% HR HR HR HR 10% S 2 15 S 3 15 S 3 15 S 4 15 BX 566 BX 686 BX 826 BX 107 K K K K 2 * 15 2 * 15 2 * 15 2 * 15 M49470 X 01 225 K B * M49470 X 01 335 K B * 2.2 3.3 4 4 M49470 M49470 M49470 M49470 * * * * 8.2 27 33 39 3 2 2 2 M49470 X 01 476 K B * 47 2 Cap Case X X X X 01 01 01 01 825 276 336 396 K K K K B B B B Cap Tol. 10% Presidio Part No. MIL-PRF-49470 (change K to M for 20% tol.) (change K to M for 20% tol.) M49470 M49470 M49470 M49470 M49470 M49470 M49470 R R R R R R R 01 01 01 01 01 01 01 155 395 126 156 186 226 276 K K K K K K K C C C C C C C * * * * * * * 1.0 1.2 1.5 3.9 12 15 18 22 27 4 4 4 3 2 2 2 2 2 .120 (3.05) .240 (6.10) .240 (6.10) .240 (6.10) .240 (6.10) .240 (6.10) .360 (9.14) .360 (9.14) .480 (12.19) 10% 10% 10% 10% 10% 10% 10% 10% 10% HR S 1 05 BR 105 K 4 * 4 HR S 2 05 BR 125 K 4 * 4 HR S 2 05 BR 155 K 4 * 4 M49470 Q 01 564 K E * HR HR HR HR HR HR S 2 13 S 2 15 S 2 15 S 3 15 S 3 15 S 4 15 BR 395 BR 126 BR 156 BR 186 BR 226 BR 276 K K K K K K 4 * 10 4 * 15 4 * 15 4 * 15 4 * 15 4 * 15 M49470 M49470 M49470 M49470 M49470 M49470 M49470 Q Q Q Q Q Q Q 01 01 01 01 01 01 01 684 185 565 685 825 106 126 K K K K K K K E E E E E E E A N (straight) B L (formed) Stack Height Profile (Dimension A) .240 .240 .240 .240 (6.10) (6.10) (6.10) (6.10) .360 (9.14) .360 (9.14) Height A inches (mm) 10% HR S 2 05 10% HR S 2 05 10% HR S 2 13 10% HR S 2 15 BX 225 K 3 * 4 BX 335 K 3 * 4 BX 825 K 3 * 10 BX 276 K 3 * 15 10% HR S 2 15 BX 336 K 3 * 15 10% HR S 3 15 BX 396 K 3 * 15 10% HR S 3 15 BX 476 K 3 * 15 Cap Tol. 10% Presidio Part No. (change K to M for 20% tol.) * * * * * * * .56 .68 1.8 5.6 6.8 8.2 10 12 4 .240 (6.10) .240 (6.10) .240 (6.10) 4 3 2 2 2 2 2 .240 (6.10) .240 (6.10) .360 (9.14) .360 (9.14) .480 (12.19) 10% 10% 10% 10% 10% 10% 10% 10% HR HR HR HR HR HR HR HR S 2 05 S 2 05 S 2 13 S 2 15 S 2 15 S 3 15 S 3 15 S 4 15 BQ564 BQ684 BQ185 BQ565 BQ685 BQ825 BQ106 BQ126 K K K K K K K K 6* 4 6* 4 6 * 10 6 * 15 6 * 15 6 * 15 6 * 15 6 * 15 Asterisk (*) refers to lead style A - F; consult factory or DSCC website for qualification status. 49470 LOW PROFILE Lead Style (change K to M for 20% tol.) 500V For these parts low profile indicates the height has been reduced by using a larger case code and reducing the number of chips per stack. 49470 Lead Symbol (Last Digit of P/N) .240 (6.10) F 200V M49470 R 01 105 K C * M49470 R 01 125 K C * Presidio Part No. 100V .240 (6.10) .240 .240 .240 .240 Height A F 50V M49470 X 01 475 K A * M49470 X 01 565 K A * Cap Tol. inches (mm) 10% Cap Case 49470 DIMENSIONS Formed Lead Height inches (mm) 49470 Case Code C .025 in. ( .64 mm) Low N/A 1 .450 (11.43) 1.950 (49.53) Low .070 .010 (1.78 0.25) 2 .800 (20.32) 1.450 (36.83) 3 .450 (11.43) 4 D inches (mm) Min Max E (max) inches (mm) Number of Leads Per Side 2.075 (52.71) .500 (12.70) 20 1.535 (38.99) .870 (22.10) 15 .950 (24.13) 1.075 (27.31) .500 (12.70) 10 .400 (10.16) .350 (8.89) .425 (10.80) .440 (11.18) 4 D L (formed) Low .045 .010 (1.14 0.25) C J (formed) Low .070 .010 (1.78 0.25) 5 .250 (6.35) .224 (5.69) .275 (6.99) .300 (7.62) 3 F J (formed) Low .045 .010 (1.14 0.25) 6 1.250 (31.75) 1.950 (49.53) 2.075 (52.71) 1.350 (34.29) 20 49470/87106/88011 LEAD STYLE AND DIMENSIONS MIL-PRF-49470 P/N M49470 X 01 475 K A A Performance Specification Indicating MIL-PRF-49470 Characteristic (1.2.1.1) Performance Specification Sheet Number Indicating MIL-PRF-49470/1 Capacitance Value (1.2.1.2) J = 5% K = 10% M = 20% Capacitance Tolerance (1.2.1.3) Rated Voltage (1.2.1.4) Lead Configuration (1.2.1.5) (for T Level parts substitute "T" for "M" in the above) only) % tol. (BP 5 r o f ll a C 7169 Construction Court, San Diego, CA 92121 USA * Tel: 858-578-9390 * Fax: 800-538-3880 or 858-578-6225 www.presidiocomponents.com * info@presidiocomponents.com 5 MIL-PRF-49470 ELECTRICAL AND PERFORMANCE CHARACTERISTICS (ALL CHARACTERISTICS AND TEST METHODS IAW MIL-PRF-49470) ELECTRICAL CHARACTERISTICS Rated Voltage: 50/100/200/500 volts. Temperature Coefficient: Dielectric Type Bias = 0 Volt Bias = Rated Voltage BP All Voltages 30PPM 30PPM BX 50/100V 15% +15, -25% BR 200V 15% +15, -40% BQ 500V 15% +15, -50% Capacitance: Measured at 1.0 volt (open circuit) and 1KHz. See tables on pages 2 through 5. Capacitance Tolerance: J = 5%, K = 10%, M = 20%. Dissipation Factor: When tested at 1.0 volt (open circuit) and 1KHz, BP characteristic shall be .15% maximum and BX/BR/BQ characteristic shall be 2.5% maximum. Dielectric Withstanding Voltage: Dielectric withstanding voltage will be tested at 250% of rated voltage except for 500V rated parts which will be tested at 150% of rated voltage. Insulation Resistance: 11 At +25C, rated voltage: 10 or 1000 M-F, whichever is less. 10 At +125C, rated voltage: 10 or 100 M-F, whichever is less. PERFORMANCE CHARACTERISTICS AND TEST METHODS (M49470 PART NUMBERS) Operating Temperature Range: The operating temperature range is -55C to +125C. Thermal Shock: All parts are cycled between -55C and +125C, 5 times. Voltage Conditioning: All parts are tested for 96 hours at 125C and 200% of rated voltage except 500V rated parts are tested at 120% of rated voltage. The overall percent defective allowed (PDA) is 10%. Solderability: Meets Mil-STD-202 and J-STD-001 requirements. Resistance to Soldering Heat: Parts withstand 260C for 10 seconds with no degradation in electrical performance or lead attachment. Terminal Strength: Leads will withstand 5 pounds (4 pounds for case code 5) of applied force without rupturing. Moisture Resistance: Every 3 months, parts are tested for 20 cycles at 90% RH and between -10C to +65C. Bias is applied during the first 10 cycles. Life: Parts are tested for 1000 hours at +125C and 200% of rated voltage except 500V rated parts shall be tested at 120% of rated voltage. Barometric Pressure: Parts will operate at rated voltage (80% of rated voltage for 500 volt parts) at reduced pressure up to 100,000 feet. Shock, Specified Pulse: Parts remain operational during and after impacts of 100 G's. Vibration: Parts remain operational during and after operating in high vibration environments of up to 20 G's. Marking: Marking shall be in accordance with Mil-STD-1285 and Mil-PRF-49470. Minimum marking will be "JB", manufacturer's code (PCI), capacitance and tolerance, and date code. Full marking will be included on the package. Cage Code 60212: Presidio Components, Inc. ADDITIONAL REQUIREMENTS (T49470 PART NUMBERS) Ultrasonic Imaging: All parts are imaged during in-process testing to remove voids and delaminations IAW EIA 469. Destructive Physical Analysis: A sample of chips is examined prior to assembly for defects in the microstructure. As part of Group A, an additional sample is examined for cracks or assembly defects. Thermal Shock: Prior to voltage conditioning, all parts are cycled between -55C and +125C, 20 times. Prior to life test sample pieces receive 100 cycles under conditions outlined above. Voltage Conditioning: All parts are tested for 168 - 264 hours at 125C and 200% of rated voltage except 500V rated parts are tested at 120% of rated voltage. The overall percent defective allowed (PDA) is 5% for case codes 4 and 5 and 8% for all other case codes. The PDA in the last 48 hours of voltage conditioning is .5% for case codes 4 and 5, and 1% for all other case codes, or 1 piece whichever is greater. Life: For qualification, parts are tested for 4000 hours at +125C and 200% of rated voltage except 500V rated parts shall be tested at 120% of rated voltage. For each lot, 12 pieces are tested for a 1000 hours under conditions outlined above. Humidity, Steady State, Low Voltage: Six pieces are tested from each lot at 1.3 volts, 85% RH and 85C, to ensure the absence of low voltage failure mechanisms. These mechanisms include microcracking. Marking: Parts will be marked as M49470 parts except "JB" is replaced with "JT". MIL-PRF-49470 FREQUENCY RESPONSE CURVES DOWNLOADABLE GRAPHS IN PDF FORMAT 10F, 50 VOLT M49470X01106_A_ PRESIDIO PN S405BX106_2_4 VISIT our library of Power Supply Capacitors Frequency Response Curves LOG ON TO PRESIDIO'S WEBSITE AT: www.presidiocomponents.com/curves All graphs in PDF format for easy viewing. 6 7169 Construction Court, San Diego, CA 92121 USA * Tel: 858-578-9390 * Fax: 800-538-3880 or 858-578-6225 www.presidiocomponents.com * info@presidiocomponents.com