©2002 Fairchild Semiconductor Corporation Rev. A2, July 2002
KSP94
PNP Epitaxial Si licon Transistor
Absolute Maximum Ratings Ta=25°C unless otherwise noted
Electrical Characteristics Ta=25°C unless otherwise noted
Symbol Parameter Value Units
VCBO Collector-Base Voltage -400 V
VCEO Collector-Emitter Voltage -400 V
VEBO Emitter-Base Voltage -6 V
ICCollector Current -300 mA
PCCollector Power Dissipation 625 mW
TJJunction Temperature 150 °C
TSTG Storage Temperature -55~150 °C
Symbol Param e ter Test Condit ion Min. Typ. Max. Units
BVCBO Collect or-B ase Break down Voltage IC= -100µA, IE=0 -400 V
BVCES Collect or-E mitter Break down Voltage IC= -100µA, VBE=0 -400 V
BVEBO E mitter-B ase Break down Voltage IE= -10µA, IC=0 -6 V
ICBO Collector Cut-off Current VCB= -300V, VE=0 -100 nA
ICES Collector Cut-off Current VCE= -400V, VBE=0V -1 µA
IEBO Emitter Cut-off Current VBE= -4V, IC=0 -100 nA
hFE1
hFE2
hFE3
hFE4
DC Current Gain VCE= -10V, IC= -1mA
VCE= -10V, IC= -10mA
VCE= -10V, IC= -50mA
VCE= -10V, IC= -100mA
40
50
45
40
300
VCE (sat)1
VCE (sat)2
Collector-Emitter Saturat ion Voltage IC= -10mA, IB= -1mA
IC= -50mA, IB= -5mA -500
-750 mV
mV
VBE (sat) Base-Emitter Saturation Voltage IC= -10mA, IB= -1mA -750 mV
Cob Output Capacitance VCB= -20V, IE=0, f=1M H z 7 pF
KSP94
High Voltage Transistor
• High Collector-Emitter Voltage: VCEO= -400V
• Low Collector-Emitter Saturation Voltage
• Complement to KSP44
1. Emitter 2. Base 3. Collector
TO-92
1
©2002 Fairchild Semiconductor Corporation
KSP94
Rev. A2, July 2002
Typical Characteristics
Figure 1. DC current Gain Figure 2. Base-Emitter Saturation Voltage
Figure 3. Collector-Emitter Saturation Voltage Figure 4. Collector Output Capacitance
-1 -10 -100 -1000
1
10
100
1000
VCE = -10V
hFE, DC CURRENT GAIN
IC[mA], COLLECTOR CURRENT
-1 -10 -100 -1000
-0.01
-0.1
-1
-10
IC = 10 IB
VBE(sat), SATURATION VOLTAGE
IC[mA], COLLECTOR CURRENT
-1 -10 -100 -1000
-0.01
-0.1
-1
-10
IC = 10 IB
VCE(sat), SATURATION VOLTAGE
IC[mA], COLLECTOR CURRENT
-0.1 -1 -10 -100
1
10
100
IE = 0
f = 1MHz
Cob[pF], CAPACITANCE
VCB [V], COLLECTOR-BASE VOLTAGE
0.46 ±0.10
1.27TYP
(R2.29)
3.86MAX
[1.27 ±0.20]1.27TYP
[1.27 ±0.20]
3.60 ±0.20
14.47 ±0.40
1.02 ±0.10
(0.25) 4.58 ±0.20
4.58 +0.25
–0.15
0.38 +0.10
–0.05
0.38 +0.10
–0.05
TO-92
Package Dimensions
KSP94
©2002 Fairchild Semiconductor Corporation
Dimensions in Millimeters
Rev. A2, July 2002
©2002 Fairchild Semiconductor Corporation Rev. I
TRADEMARKS
The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not
intended to be an exhaustive list of all such trademarks.
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY
PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY
LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN;
NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR
CORPORATION.
As used herein:
1. Life support devices or systems are devic es or syst em s
which, (a) ar e intended for surgical implant into the body,
or (b) support or sustain life, or (c) whose failure to perform
when properly used in accordance with instructions for use
provided in the labeling, can be reasonably expected to
result in significant injury to the user.
2. A critical component is any component of a life support
device or system whose failure to perform can be
reasonably expected to cause the failure of the life support
device or system, or to affect its safety or effectiveness.
PRODUCT STATUS DEFINITIONS
Definition of Terms
Datasheet Identification Product Status Definition
Advance Information Formative or In
Design This datasheet contains the design specifications for
product development. Specifications may change in
any manner without notice.
Preliminary First Production This datasheet contains preliminary data, and
supplementary data will be published at a later date.
Fairchild Semiconduct or reserv es the right to make
changes at any time without notice in order to improve
design.
No Identification Needed Full Production This datasheet contains final specifications. Fairchild
Semiconductor reserves the right to make changes at
any time without notice in order to improve design.
Obsolete Not In Production This datasheet contains specifications on a product
that has been discontinued by Fairchild semiconductor.
The datasheet is printed for reference information only.
FACT™
FACT Quiet series™
FAST®
FASTr™
FRFET™
GlobalOptoisolator™
GTO™
HiSeC™
I2C™
ImpliedDisconnect™
ISOPLANAR™
LittleFET™
MicroFET™
MicroPak™
MICROWIRE™
MSX™
MSXPro™
OCX™
OCXPro™
OPTOLOGIC®
OPTOPLANAR™
PACMAN™
POP™
Power247™
PowerTrench®
QFET™
QS™
QT Optoelectronics™
Quiet Series™
RapidConfigure™
RapidConnect™
SLIENT SWITCHER®
SMART START™
SPM™
Stealth™
SuperSOT™-3
SuperSOT™-6
SuperSOT™-8
SyncFET™
TinyLogic™
TruTranslation™
UHC™
UltraFET®
VCX™
ACEx™
ActiveArray™
Bottomless™
CoolFET™
CROSSVOLT™
DOME™
EcoSPARK™
E2CMOS™
EnSigna™
Across the board. Around the world™
The Power Franchise™
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER
NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD
DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT
OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT
RIGHTS, NOR THE RIGHTS OF OTHERS.
TRADEMARKS
The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is
not intended to be an exhaustive list of all such trademarks.
LIFE SUPPORT POLICY
FAIRCHILDS PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION.
As used herein:
1. Life support devices or systems are devices or
systems which, (a) are intended for surgical implant into
the body, or (b) support or sustain life, or (c) whose
failure to perform when properly used in accordance
with instructions for use provided in the labeling, can be
reasonably expected to result in significant injury to the
user.
2. A critical component is any component of a life
support device or system whose failure to perform can
be reasonably expected to cause the failure of the life
support device or system, or to affect its safety or
effectiveness.
PRODUCT STATUS DEFINITIONS
Definition of Terms
Datasheet Identification Product Status Definition
Advance Information
Preliminary
No Identification Needed
Obsolete
This datasheet contains the design specifications for
product development. Specifications may change in
any manner without notice.
This datasheet contains preliminary data, and
supplementary data will be published at a later date.
Fairchild Semiconductor reserves the right to make
changes at any time without notice in order to improve
design.
This datasheet contains final specifications. Fairchild
Semiconductor reserves the right to make changes at
any time without notice in order to improve design.
This datasheet contains specifications on a product
that has been discontinued by Fairchild semiconductor.
The datasheet is printed for reference information only.
Formative or
In Design
First Production
Full Production
Not In Production
ImpliedDisconnect
ISOPLANAR
LittleFET
MicroFET
MicroPak
MICROWIRE
MSX
MSXPro
OCX
OCXPro
OPTOLOGICâ
OPTOPLANAR
FACT
FACT Quiet Series
FASTâ
FASTr
FRFET
GlobalOptoisolator
GTO
HiSeC
I2C
Rev. I
ACEx
ActiveArray
Bottomless
CoolFET
CROSSVOLT
DOME
EcoSPARK
E2CMOSTM
EnSignaTM
Across the board. Around the world.
The Power Franchise
PACMAN
POP
Power247
PowerTrenchâ
QFET
QS
QT Optoelectronics
Quiet Series
RapidConfigure
RapidConnect
SILENT SWITCHERâ
SMART START
SPM
Stealth
SuperSOT-3
SuperSOT-6
SuperSOT-8
SyncFET
TinyLogic
TruTranslation
UHC
UltraFETâ
VCX
