Medium Capacity Rockers GENERAL SPECIFICATIONS FOR SW3000s B Electrical Capacity (Resistive & Inductive Load) Power Level: Shown in the following tables Other Ratings Contact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life: Electrical Life: Angle of Throw (): 10 milliohms maximum 1,000 megohms minimum @ 500V DC 2,000V AC minimum for 1 minute minimum 30,000 operations minimum 10,000 operations minimum Shown on drawings or following tables Materials & Finishes Rocker: Mounting Frame: Case Cover/Insulator: Case: Movable Contactor Plate: Movable & Stationary Contacts: Terminals: Urea resin; all rockers are white. Steel with chromate plating over zinc plating Phenolic resin Melamine phenol Copper with silver plating Silver alloy plus copper with silver plating Copper with tin plating Environmental Data Operating Temp Range: -10C through +70C (+14F through +158F) Sealing: Dustproof cover of silicone rubber on SW3006A, SW3007A, & SW3008A Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers Toggles Series SW Maximum Panel Thickness: Shown with following drawings Soldering Time & Temperature: Manual Soldering: See Profile A in Supplement section. Standards & Certifications UL: File No. E44145 - Recognized only when ordered with marking on switch. Add "/U" or "/CUL" to end of part number to order UL recognized switch. UL or cULus recognition designated beside part numbers on following pages. See Supplement section to find UL or cULus rating details. CSA: File No. 023535_0_000 - Certified only when ordered with marking on switch. Add "/C" to end of part number to order CSA certified switch. CSA certification designated beside part numbers on following pages. See Supplement section to find CSA rating details. VDE: License No. 119189 - Approved only when ordered with marking on switch. Add "/V" to end of part number to order VDE approved switch. SW3006A at 20A @ 125V AC & 10A @ 250V AC Supplement Accessories Indicators Touch Tilt Tactiles Installation B120 www.nkk.com Series SW Toggles Medium Capacity Rockers SINGLE POLE WITH SOLDER LUG * Center Resistive Up Pole R Inductive AC 125V AC 250V DC 30V AC 125V PF 0.6 = Angle of Throw SPST ON 1-3 NONE OFF -- 15A 6A 15A 10A 24 SW3002A SPDT ON 2-3 NONE ON 2-1 15A 6A 15A 10A 24 SW3003A SPDT ON 2-3 OFF ON 2-1 15A 6A 15A 10A 28 SPST 1 3 2 (COM) SPDT INTERNAL CONNECTION 3 Note: Terminal numbers are actually on the switch. 1 * Wire harness & cable assemblies offered only in Americas. (0.8) Typ .031 (3.5) Dia Typ .138 3 (27.0) 1.063 (4.8) Typ .189 (30.0) 1.181 (45.0) 1.772 2 (21.4) .843 1 (13.5) .531 (1.0) .039 (5.7) .224 (31.3) 1.232 (5.7) .224 (28.0) 1.102 (38.0) 1.496 (14.5) .571 (18.0) .709 Maximum Effective Panel Thickness: .197" (5.0mm) for SW3001A & SW3002A models; .177" (4.5mm) for SW3003A models SW3001A does not have terminal 2. SW3001A Rocker Position/Connected Terminals ( ) = Momentary * UL, cULus & CSA recognized only when ordered with marking on switch (see General Specs) Electrical Capacity Down *Approvals R C SW3006A -- -- SW3008A -- -- Up Pole US SW3007A Center Resistive -- Inductive AC 125V AC 250V DC 30V AC 125V PF 0.6 = Angle of Throw DPDT ON 2-3 5-6 NONE ON 2-1 5-4 20A 10A 20A 10A 24 DPDT ON 2-3 5-6 OFF ON 2-1 5-4 15A 6A 15A 10A 28 DPDT (ON) 2-3 5-6 OFF (ON) 2-1 5-4 15A 6A 15A 10A 24 Throw & Schematic: 2 DPDT 3 (COM) 1 5 6 Note: Terminal numbers are actually on the switch. 4 Touch Model R Slides DOUBLE POLE WITH SOLDER LUG * * Wire harness & cable assemblies offered only in Americas. (0.8) Typ .031 (27.0) 1.063 (13.5) .531 (5.9) .232 (1.0) .039 (33.3) 1.311 (5.7) .224 (28.0) 1.102 (31.2) 1.228 (4.8) Typ .189 (21.4) .843 Indicators 3 6 (38.0) 1.496 (3.5) Dia Typ .138 5 2 4 1 (18.5) .728 (45.0) 1.772 (38.0) 1.496 (14.5) .571 Maximum Effective Panel Thickness: .197" (5.0mm) for SW3006A & SW3008A models; .177" (4.5mm) for SW3007A models www.nkk.com Accessories (2.4) Dia Typ .094 Supplement (9.6) .378 M3 x 6 Tactiles (38.0) 1.496 Keylocks (2.4) Dia Typ .094 Rotaries (9.7) .382 M3 x 6 Tilt Throw & Schematics: Programmable Illuminated PB SW3001A B Rockers Down *Approvals Model Electrical Capacity Rocker Position/Connected Terminals Pushbuttons * UL & CSA recognized only when ordered with marking on switch (see General Specs) SW3006A B121 Slides High Capacity Rockers GENERAL SPECIFICATIONS FOR SW3800s B Electrical Capacity (Resistive & Inductive Load) Power Level: Contact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life: Electrical Life: Angle of Throw: Nominal Operating Force: Tactiles Tilt 10 milliohms maximum 1,000 megohms minimum @ 500V DC 2,000V AC minimum for 1 minute minimum 50,000 operations minimum 25,000 operations minimum Shown on following drawings 1,800 grams for SW3822 2,200 grams for SW3823 Off to On 800 grams for SW3823 On to Off Materials & Finishes Rocker: Mounting Frame: Case Cover/Insulator: Case: Movable Contacts: Stationary Contacts: Terminals: Urea resin; all rockers are white. Steel with chromate plating over zinc plating Phenolic resin Melamine phenol Copper with silver plating Silver alloy plus copper with silver plating Brass (terminal screws of brass with nickel plating) Environmental Data Operating Temp Range: -10C through +70C (+14F through +158F) Standards & Certifications UL: File No. E44145 - Recognized only when ordered with marking on switch. Add "/U" or "/CUL" to end of part number to order UL recognized switch. UL or cULus recognition designated beside part numbers on following pages. See Supplement section to find UL or cULus rating details. CSA: File No. 023535_0_000 - Certified only when ordered with marking on switch. Add "/C" to end of part number to order CSA certified switch. CSA certification designated beside part numbers on following pages. See Supplement section to find CSA rating details. Indicators Touch Shown in the following tables Note: See Supplement section for details of design for inductive DC loads. Other Ratings Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers Toggles Series SW Accessories Wiring for DC400V 10A 1 2 (2) 4 5 (3) Minus Pole Connection Supplement 3 Contact Connection Position Plus Pole Connection External Connection B122 6 www.nkk.com (5) (6) Toggles Series SW High Capacity Rockers DOUBLE POLE WITH SCREW LUG DC 48V Inductive DC 125V DC 250V AC 125V PF 0.6 DC 400V AC 250V PF 0.6 SW3821 DPST ON 2-3 5-6 NONE OFF 30A 30A 30A -- 1A -- -- 30A 15A SW3822 DPDT ON 2-3 5-6 NONE ON 2-1 5-4 30A 30A 30A -- 1A -- -- 30A 15A SW3823 DPDT ON 2-3 5-6 OFF ON 2-1 5-4 30A 30A 30A -- 1A -- -- 30A 15A SW3821D DPST ON 2-3 5-6 NONE OFF -- -- 30A 30A 20A 15A 4A (10A) -- -- SW3822D DPDT ON 2-3 5-6 NONE ON 2-1 5-4 -- -- 30A 30A 20A 15A 4A -- -- SW3823D DPDT ON OFF ON 2-1 5-4 -- 30A 30A 15A -- -- -- -- Throw & Schematics: 2-3 5-6 2 DPST (COM) 3 5 -- -- -- 2 DPDT (COM) 3 6 1 5 6 Note: Terminal numbers are actually on the switch. 4 * UL/CUL & CSA for the following ratings: UL/CUL: 30A @ 30V DC, 15A @ 125V DC; CSA: 30A @ 30V DC, 15A @ 125V DC * UL, cULus & CSA recognized only when ordered with marking on switch (see General Specs) ( ) capacity is due to series wiring, see General Specifications page. (13.2) .520 M3 x 6 (12.0) .472 (1.0) .039 6 3 5 4 2 1 (42.0) 1.654 26 (12.0) Typ .472 (31.0) 1.220 (22.0) .866 (6.7) .264 (24.0) .945 (44.5) 1.752 SW3821 & SW3821D do not have terminals 1 & 4. (56.0) 2.205 Rotaries (36.0) 1.417 SW3822 Maximum Effective Panel Thickness .177" (4.5mm). Panel cutout shown below. Slides (46.0) 1.811 Keylocks M4.5x6 THREE POLE WITH SCREW LUG Rocker Position/Connected Terminals Down *Approvals Model C Electrical Capacity Resistive Up AC 125V Pole R R Center US AC 250V Inductive DC 30V DC 125V AC 125V PF 0.6 AC 250V PF 0.6 SW3831 3PST ON 2-3 5-6 8-9 NONE OFF 30A 30A 30A 1A 30A 15A SW3832 3PDT ON 2-3 5-6 8-9 NONE ON 2-1 5-4 8-7 30A 30A 30A 1A 30A 15A ON 2-1 5-4 8-7 30A 30A 30A 1A 30A 15A -- -- 30A 15A -- -- -- SW3833 3PDT ON 2-3 5-6 8-9 OFF SW3831D 3PST ON 2-3 5-6 8-9 NONE OFF SW3832D 3PDT ON 2-3 5-6 8-9 NONE ON 2-1 5-4 8-7 -- -- 30A 15A -- -- SW3833D 3PDT ON 2-3 5-6 8-9 OFF ON 2-1 5-4 8-7 -- -- 30A 15A -- -- Throw & Schematics: 2 3PST 3 5 (COM) 6 8 9 -- 2 3PDT 3 B Rockers DC 30V Pushbuttons US AC 250V 5 1 6 (COM) 4 8 9 Note: Terminal numbers are actually on the switch. 7 Tactiles C AC 125V Pole R R Resistive Up Tilt Model Center Touch Down *Approvals Electrical Capacity Programmable Illuminated PB Rocker Position/Connected Terminals (3.5) Dia Typ .138 M4.5 x 6 6 3 9 (46.0) 1.811 (36.0) 1.417 (46.0) 1.811 26 (12.0) Typ .472 (31.0) 1.220 (22.0) .866 (37.0) 1.457 (42.0) 1.654 5 8 7 2 1 (56.0) 2.205 4 (6.7) .264 (43.0) 1.693 (44.5) 1.752 SW3831 & SW3831D do not have terminals 1, 4 & 7. www.nkk.com (23.0) .906 Maximum Effective Panel Thickness .177" (4.5mm) B123 Accessories (14.5) Typ .571 (1.0) .039 Supplement (13.2) .520 M3 x 6 Indicators * UL/CUL & CSA for the following ratings: UL/CUL: 30A @ 30V DC, 15A @ 125V DC; CSA: 30A @ 30V DC, 15A @ 125V DC * UL, cULus & CSA recognized only when ordered with marking on switch (see General Specs) Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: NKK Switches: SW3833 SW3832/A SW38X006 SW3832/UC SW3006A/UCV SW3821/A/UC SW3832/A/CUL SW3823-RO SW3821/U-RO SW3822/CUL SW3823/CUL SW3831/CUL SW3821/CUL SW3833/CUL SW3832Z035 SW3822/A SW3821D/328 SW3821D/U SW3006A/U SW3823D/U SW3833D/UC SW3831D/UC SW3831D/U SW3002A SW3831 SW3822 SW3833D/U SW3821D/UC SW3823D/UC SW3822D/UC SW3823D SW3832/U SW3822/U SW3822D/U SW3821D SW3823/U SW3832D SW3832D/U SW3821 SW3003A SW3832D/UC SW3832 SW3007A SW3831D SW3833/U SW3008A SW3821/UC SW3831/U SW3006A SW3001A SW3833D SW3823 SW3821/U