SIDACtor Data Book DO-214 SIDACtor O-274 SIDAGtor The DO-214 SIDACtor is a solid state protection device designed for telecommunications applications such as modems, line cards, fax machines, etc. The SIDACtor is used to help equipment meet various regulatory requirements including: GR 1089, ITU K.20 & K.21, IEC 950, UL 1459 & 1950 and FCC Part P Ey & Eo 68. : Ss0R0S- : = so = SEEEEESS ZS : P03008 _ 25 40 5 5 800 1 50 110 Po6408 _ 53 tT 5 5 800 1 150 50 P07208 _ 65 88 5 5 800 1 150 50 Pogso0s _ 75 98 5 5 800 1 150 50 P1100S | 90 130 5 5 800 1 150 40 P13008_ 120 160 5 5 800 1 150 40 P1i5008 _ 140 180 5 5 800 1 150 40 P18008 _ 160 220 5 5 800 1 150 30 P23008 _ 190 260 5 5 800 1 150 30 P26008 _ 220 300 5 5 800 1 150 30 P31008_ 27s 350 5 5 800 1 150 30 P35008 _ 320 400 5 5 800 1 150 30 * For individual SA, SB and SC surge ratings, see table below. Notes: + All measurements are made at an ambient temperature of 25C. bp applies to -40C through +85C temperature range. * lpp is a repetitive surge rating and is guaranteed for the life of the product. * Listed SIDACtors are bi-directional. All electrical parameters & surge ratings apply to forward and reverse polarities. * Vorm is measured at Iprm. + Vg is measured at 100V/us. * Special voltage (Vg & Vorny) and holding current (I,4) requirements are available upon request. + Off-state capacitance is measured at 1MHz with a 2 volt bias and is a typical value for SA and SB product. "SC" capacitance is approximately 2x the listed value. Teccor Electronics (972) 580-7777 DO-214 SIDACtor SIDACtor Data Book Thermal Considerations Tj Junction Termperature Range -40 to +150 Ts Storage Temperature Range -65 to +150 C DO-214 Te Maximum Case Temperature +75 C Rejc Thermal Resistance: junction to case +28 CAV Roja Thermal Resistance: junction to ambient +90 CAW V-I Characteristics t,-xty Pulse Wave-form +1 a a tr = rise time to peak value ; |- = 100 Peak td = decay time to half value Is a . | Value 4 2 : . 5 A Wavpform= tr x tg o 1 Ipbpu> 8 t v a S0W;--+--- ST Half Value a4 ! ! a ! ! ! ! ~~, ~ 9 i i tr td o t- Tims (us) -l Normalized V, Change vs. Normalized DC Holding Current vs. Junction Temperature Case Temperature 14 x 12 -_ 4 10 e ao uw =e 8 G xii 5 6 eg 4 = 5 2 3 = a 5 a l = P 4 rd a l o 4 1 40-20 0 20 40 60 80100120140 160 -40 -20 0 20 40 60 80100120140 160 Junction Temperature (Ty) - C Case Temperature (Te) - C Teccor Electronics (972) 580-7777 SIDACtor Data Book DO-214 SIDACtor OO-214 SIDAGtor Package Symbolization [= Standardized... = Standardized... |... symbolzed...... Poos0SA P1800SA Poo80SB P1800SB f Poos0Sc P18008C Ff Po300SA P2000SA & Po300SB P2000SB 5 Po3008C P20008C PO640SA P2300SA Po640SB P2300SB PO640SC P2300SC P0641SA P2600SA Poe41SC P2600SB Po720SA P2600SC P0720SB P3100SA Po7208C P3100SB Po721SA P3100SC Po721SC P3500SA PogooSA P3500SB Pog00SB P3500SC Pogo0Sc B1100CA P1100SA B1i100CC P1100SB B1160CA P1100SC B1160CC P1200SA B1200CA P12008B B1200CC P1200SC B2100CA P1300SA B2e100CC P1300SB B2160CA P13008C B2i60cc P1500SA B2200CA P1500SB B2200CC P1500SC Note: On the DO-214 package, date code is located below the Symbolized Part Number. TO-92 and TO-220 devices have full part numbers and a date code printed on the part. Teccor Electronics 2-5 (972) 580-7777