MATERIAL SPECIFICATIONS:
Contacts ..................................Silver clad copper with gold flash
Case Material ..........................Thermoset
Actuator Material ....................Nickel plated copper alloy
Terminals ................................Copper with gold flash
Terminal Seal ..........................Molded in
ENVIRONMENTAL SPECIFICATIONS:
Operating Temperature............-4°F to +176°F (-20°C to +80°C)
Storage Temperature................-40F to +176°F (-40°C to +80°C)
Solder Heat Resistance............See page M6-7
TYPICAL PERFORMANCE CHARACTERISTICS:
Contact Rating ........................6 A @ 125 VAC, 3 A @ 250 VAC
Initial Contact Resistance........10 Milliohms max.
Contact Timing........................Break-before-make
Insulation Resistance ..............1,000 Megohms min.
Dielectric Strength ..................1,500 Volts RMS @ sea level
Actuation Force ......................1.3 to 2.7 lbs.
Actuator Travel.........................140" (3.56)
Life Expectancy ......................50,000 Actuations
MPA6 Series
“6 Amp” Panel Mount Pushbutton
Wire-Lug Te rmination
DPDT
3PDT
4PDT
MPA206N
MPA306D
Model Type Act. Code P. M9 Action
MPA206N DPDT 24 Push-on/Push-off
MPA206R SPDT 20 Momentary
MPA206NPC DPDT 24 Push-on/Push-off
MPA206RPC DPDT 20 Momentary
Model Type Act. Code P. M9 Action
MPA306D 3PDT 25 Push-on/Push-off
MPA306F 3PDT 21 Momentary
Model Type Act. Code P. M9 Action
MPA106D SPDT 23 Push-on/Push-off
MPA106F SPDT 19 Momentary
MPA406N
SPDT
MPA106D
Cap not supplied, order separately (See Cap Model C22 and C23 on page D45.)
Cap not supplied, order separately (See Cap Model C22 and C23 on page D45.)
Cap not supplied, order separately (See Cap Model C22 and C23 on page D45.)
Cap not supplied, order separately (See Cap Model C22 and C23 on page D45.)