Product family data sheet
Copyright © 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are
registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. Other trademarks,

or association.
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300

CLD-DS51 REV 13
Cree® XLamp® XP-G2 LEDs
PRODUCT DESCRIPTION
The XLamp® XP-G2 LED builds on the
unprecedented performance of the
original XP-G by increasing lumen output
up to 20% while providing a single die LED
point source for precise optical control.
The XP-G2 LED shares the same footprint
as the original XP-G, providing a seamless
upgrade path and shortening the design
cycle.
XLamp XP-G2 LEDs are the ideal choice
for lighting applications where high
light output and maximum efcacy are
required, such as LED light bulbs, outdoor
lighting, portable lighting, indoor lighting
and solar-powered lighting.
FEATURES
Available in white, outdoor white and
80-, 85- and 90-CRI white
ANSI-compatible chromaticity bins
Binned at 85°C
Maximum drive current: 1500mA
Low thermal resistance: 4°C/W
Wide viewing angle: 115°
Unlimited oor life at
≤ 30ºC/85% RH
Reow solderable - JEDEC J-STD-020C
Electrically neutral thermal path
RoHS and REACh compliant
UL® recognized component (E349212)
TABLE OF CONTENTS
Characteristics ............................................2
Flux Characteristics ....................................3
Relative Spectral Power Distribution ...... 10
Relative Flux vs. Junction Temperature .. 10
Electrical Characteristics ......................... 11
Relative Flux vs. Current .......................... 11
Relative Chromaticity vs Current and
Temperature ............................................. 12
Typical Spatial Distribution ...................... 13
Thermal Design ........................................ 13
Performance Groups – Luminous Flux... 14
Performance Groups – Chromaticity ...... 15
Crees Standard Chromaticity Regions
Plotted on the 1931 CIE Curve ................ 18
Crees Standard Cool White Kits Plotted
on ANSI Standard Chromaticity
Regions ..................................................... 20
Crees Standard Warm and Neutral
White Kits Plotted on ANSI Standard
Chromaticity Regions .............................. 21
Crees Standard Chromaticity Kits .......... 23
Bin and Order Code Formats ................... 24
Reow Soldering Characteristics ............ 25
Notes ........................................................ 26
Mechanical Dimensions .......................... 28
Tape and Reel ........................................... 30
Packaging ................................................. 31
Copyright © 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark
of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specic product and/or
vendor endorsement, sponsorship or association.
2
XLamp® Xp-G2 LED
CHARACTERISTICS
Characteristics Unit Minimum Typical Maximum
Thermal resistance, junction to solder point °C/W 4
Viewing angle (FWHM) degrees 115
Temperature coefcient of voltage mV/°C -1.8
ESD withstand voltage (HBM per Mil-Std-883D) V 8000
DC forward current mA 1500
Reverse voltage V 5
Forward voltage (@ 350mA, 85 °C) V 2.8 3.15
Forward voltage (@ 700mA, 85 °C) V 2.9
Forward voltage (@ 1000mA, 85 °C) V 3.0
Forward voltage (@ 1500mA, 85 °C) V 3.1
LED junction temperature °C 150
Copyright © 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark
of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specic product and/or
vendor endorsement, sponsorship or association.
3
XLamp® Xp-G2 LED
Notes
Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a
tolerance of ±2 on CRI measurements. See the Measurements section (page 26).
Cree XLamp XP-G2 LED order codes specify only a minimum ux bin and not a maximum. Cree may ship reels in ux bins higher than
the minimum specied by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions
specied by the order code.
* Flux values @ 25°C are calculated and for reference only.
FLUX CHARACTERISTICS (TJ
The following table provides order codes for XLamp XP-G LEDs. For a complete description of the order code nomenclature, please see
the Bin and Order Code Formats section (page 24). For denitions of the chromaticity kits, please see the Crees Standard Chromaticity
Kits section (page 23).
Chromaticity 
 Order Codes
Kit CCT Code 
°C

 70 CRI Typical
51 6200 K
S4 164 180 XPGBWT-L1-0000-00L51
S3 156 171 XPGBWT-L1-0000-00K51
S2 148 163 XPGBWT-L1-0000-00J51
R5 139 153 XPGBWT-L1-0000-00H51
R4 130 143 XPGBWT-L1-0000-00G51
R3 122 134 XPGBWT-L1-0000-00F51
53 6000 K
S4 164 180 XPGBWT-L1-0000-00L53
S3 156 171 XPGBWT-L1-0000-00K53
S2 148 163 XPGBWT-L1-0000-00J53
R5 139 153 XPGBWT-L1-0000-00H53
R4 130 143 XPGBWT-L1-0000-00G53
R3 122 134 XPGBWT-L1-0000-00F53
50 6200 K
S4 164 180 XPGBWT-L1-0000-00L50
S3 156 171 XPGBWT-L1-0000-00K50
S2 148 163 XPGBWT-L1-0000-00J50
R5 139 153 XPGBWT-L1-0000-00H50
R4 130 143 XPGBWT-L1-0000-00G50
R3 122 134 XPGBWT-L1-0000-00F50
E1 6500 K
S4 164 180 XPGBWT-L1-0000-00LE1
S3 156 171 XPGBWT-L1-0000-00KE1
S2 148 163 XPGBWT-L1-0000-00JE1
R5 139 153 XPGBWT-L1-0000-00HE1
R4 130 143 XPGBWT-L1-0000-00GE1
R3 122 134 XPGBWT-L1-0000-00FE1
Copyright © 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark
of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specic product and/or
vendor endorsement, sponsorship or association.
4
XLamp® Xp-G2 LED
Notes
Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a
tolerance of ±2 on CRI measurements. See the Measurements section (page 26).
Cree XLamp XP-G2 LED order codes specify only a minimum ux bin and not a maximum. Cree may ship reels in ux bins higher than
the minimum specied by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions
specied by the order code.
* Flux values @ 25°C are calculated and for reference only.
Chromaticity 
 Order Codes
Kit CCT Code 
°C

 70 CRI Typical
E2 5700 K
S4 164 180 XPGBWT-L1-0000-00LE2
S3 156 171 XPGBWT-L1-0000-00KE2
S2 148 163 XPGBWT-L1-0000-00JE2
R5 139 153 XPGBWT-L1-0000-00HE2
R4 130 143 XPGBWT-L1-0000-00GE2
R3 122 134 XPGBWT-L1-0000-00FE2
Chromaticity 
 Order Codes
Kit CCT Code 
°C

 70 CRI Typical 75 CRI Typical 80 CRI Minimum
E3 5000 K
S4 164 180 XPGBWT-01-0000-00LE3
S3 156 171 XPGBWT-01-0000-00KE3
S2 148 163 XPGBWT-01-0000-00JE3 XPGBWT-L1-0000-00JE3
R5 139 153 XPGBWT-01-0000-00HE3 XPGBWT-L1-0000-00HE3
R4 130 143 XPGBWT-01-0000-00GE3 XPGBWT-L1-0000-00GE3
R3 122 134 XPGBWT-01-0000-00FE3 XPGBWT-L1-0000-00FE3
R2 114 125 XPGBWT-01-0000-00EE3 XPGBWT-L1-0000-00EE3
Q5 107 118 XPGBWT-L1-0000-00DE3
F4 4750 K
S4 164 180 XPGBWT-01-0000-00LF4
S3 156 171 XPGBWT-01-0000-00KF4
S2 148 163 XPGBWT-01-0000-00JF4 XPGBWT-L1-0000-00JF4
R5 139 153 XPGBWT-01-0000-00HF4 XPGBWT-L1-0000-00HF4
R4 130 143 XPGBWT-01-0000-00GF4 XPGBWT-L1-0000-00GF4
R3 122 134 XPGBWT-01-0000-00FF4 XPGBWT-L1-0000-00FF4
R2 114 125 XPGBWT-01-0000-00EF4 XPGBWT-L1-0000-00EF4
Q5 107 118 XPGBWT-L1-0000-00DF4
FLUX CHARACTERISTICS (TJ
Copyright © 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark
of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specic product and/or
vendor endorsement, sponsorship or association.
5
XLamp® Xp-G2 LED
Notes
Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a
tolerance of ±2 on CRI measurements. See the Measurements section (page 26).
Cree XLamp XP-G2 LED order codes specify only a minimum ux bin and not a maximum. Cree may ship reels in ux bins higher than
the minimum specied by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions
specied by the order code.
* Flux values @ 25°C are calculated and for reference only.
Chromaticity 
 Order Codes
Kit CCT Code 
°C

 70 CRI Typical 75 CRI Typical 80 CRI Minimum
E4 4500 K
S4 164 180 XPGBWT-01-0000-00LE4
S3 156 171 XPGBWT-01-0000-00KE4
S2 148 163 XPGBWT-01-0000-00JE4 XPGBWT-L1-0000-00JE4
R5 139 153 XPGBWT-01-0000-00HE4 XPGBWT-L1-0000-00HE4
R4 130 143 XPGBWT-01-0000-00GE4 XPGBWT-L1-0000-00GE4
R3 122 134 XPGBWT-01-0000-00FE4 XPGBWT-L1-0000-00FE4
R2 114 125 XPGBWT-01-0000-00EE4 XPGBWT-L1-0000-00EE4
Q5 107 118 XPGBWT-L1-0000-00DE4
F5 4250 K
S4 164 180 XPGBWT-01-0000-00LF5
S3 156 171 XPGBWT-01-0000-00KF5
S2 148 163 XPGBWT-01-0000-00JF5 XPGBWT-L1-0000-00JF5
R5 139 153 XPGBWT-01-0000-00HF5 XPGBWT-L1-0000-00HF5
R4 130 143 XPGBWT-01-0000-00GF5 XPGBWT-L1-0000-00GF5
R3 122 134 XPGBWT-01-0000-00FF5 XPGBWT-L1-0000-00FF5
R2 114 125 XPGBWT-01-0000-00EF5 XPGBWT-L1-0000-00EF5
Q5 107 118 XPGBWT-L1-0000-00DF5
E5 4000 K
S4 164 180 XPGBWT-01-0000-00LE5
S3 156 171 XPGBWT-01-0000-00KE5
S2 148 163 XPGBWT-01-0000-00JE5 XPGBWT-L1-0000-00JE5
R5 139 153 XPGBWT-01-0000-00HE5 XPGBWT-L1-0000-00HE5 XPGBWT-H1-0000-00HE5
R4 130 143 XPGBWT-01-0000-00GE5 XPGBWT-L1-0000-00GE5 XPGBWT-H1-0000-00GE5
R3 122 134 XPGBWT-01-0000-00FE5 XPGBWT-L1-0000-00FE5 XPGBWT-H1-0000-00FE5
R2 114 125 XPGBWT-01-0000-00EE5 XPGBWT-L1-0000-00EE5 XPGBWT-H1-0000-00EE5
Q5 107 118 XPGBWT-L1-0000-00DE5 XPGBWT-H1-0000-00DE5
Z5 4000 K
R5 139 153 XPGBWT-L1-0000-00HZ5 XPGBWT-H1-0000-00HZ5
R4 130 143 XPGBWT-L1-0000-00GZ5 XPGBWT-H1-0000-00GZ5
R3 122 134 XPGBWT-L1-0000-00FZ5 XPGBWT-H1-0000-00FZ5
R2 114 125 XPGBWT-L1-0000-00EZ5 XPGBWT-H1-0000-00EZ5
Q5 107 118 XPGBWT-L1-0000-00DZ5 XPGBWT-H1-0000-00DZ5
FLUX CHARACTERISTICS (TJ
Copyright © 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark
of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specic product and/or
vendor endorsement, sponsorship or association.
6
XLamp® Xp-G2 LED
Notes
Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a
tolerance of ±2 on CRI measurements. See the Measurements section (page 26).
Cree XLamp XP-G2 LED order codes specify only a minimum ux bin and not a maximum. Cree may ship reels in ux bins higher than
the minimum specied by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions
specied by the order code.
* Flux values @ 25°C are calculated and for reference only.
FLUX CHARACTERISTICS (TJ
Chromaticity 
 Order Codes
Kit CCT Code 
°C

 70 CRI Typical 80 CRI Typical 80 CRI Minimum 85 CRI Minimum 90 CRI Minimum
F6 3750 K
S2 148 163 XPGBWT-01-0000-
00JF6
R5 139 153 XPGBWT-01-0000-
00HF6
XPGBWT-L1-0000-
00HF6
XPGBWT-H1-0000-
00HF6
R4 130 143 XPGBWT-01-0000-
00GF6
XPGBWT-L1-0000-
00GF6
XPGBWT-H1-0000-
00GF6
R3 122 134 XPGBWT-01-0000-
00FF6
XPGBWT-L1-0000-
00FF6
XPGBWT-H1-0000-
00FF6
R2 114 125 XPGBWT-01-0000-
00EF6
XPGBWT-L1-0000-
00EF6
XPGBWT-H1-0000-
00EF6
Q5 107 118 XPGBWT-01-0000-
00DF6
XPGBWT-L1-0000-
00DF6
XPGBWT-H1-0000-
00DF6
E6 3500 K
S2 148 163 XPGBWT-01-0000-
00JE6
R5 139 153 XPGBWT-01-0000-
00HE6
XPGBWT-L1-0000-
00HE6
XPGBWT-H1-0000-
00HE6
R4 130 143 XPGBWT-01-0000-
00GE6
XPGBWT-L1-0000-
00GE6
XPGBWT-H1-0000-
00GE6
R3 122 134 XPGBWT-01-0000-
00FE6
XPGBWT-L1-0000-
00FE6
XPGBWT-H1-0000-
00FE6
R2 114 125 XPGBWT-01-0000-
00EE6
XPGBWT-L1-0000-
00EE6
XPGBWT-H1-0000-
00EE6
Q5 107 118 XPGBWT-01-0000-
00DE6
XPGBWT-L1-0000-
00DE6
XPGBWT-H1-0000-
00DE6
Z6 3500 K
R4 130 143 XPGBWT-L1-0000-
00GZ6
XPGBWT-H1-0000-
00GZ6
R3 122 134 XPGBWT-L1-0000-
00FZ6
XPGBWT-H1-0000-
00FZ6
R2 114 125 XPGBWT-L1-0000-
00EZ6
XPGBWT-H1-0000-
00EZ6
Q5 107 118 XPGBWT-L1-0000-
00DZ6
XPGBWT-H1-0000-
00DZ6
Copyright © 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark
of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specic product and/or
vendor endorsement, sponsorship or association.
7
XLamp® Xp-G2 LED
Notes
Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a
tolerance of ±2 on CRI measurements. See the Measurements section (page 26).
Cree XLamp XP-G2 LED order codes specify only a minimum ux bin and not a maximum. Cree may ship reels in ux bins higher than
the minimum specied by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions
specied by the order code.
* Flux values @ 25°C are calculated and for reference only.
Chromaticity 
 Order Codes
Kit CCT Code 
°C

 70 CRI Typical 80 CRI Typical 80 CRI Minimum 85 CRI Minimum 90 CRI Minimum
F7 3250 K
S2 148 163 XPGBWT-01-0000-
00JF7
R5 139 153 XPGBWT-01-0000-
00HF7
XPGBWT-L1-0000-
00HF7
XPGBWT-H1-0000-
00HF7
R4 130 143 XPGBWT-01-0000-
00GF7
XPGBWT-L1-0000-
00GF7
XPGBWT-H1-0000-
00GF7
R3 122 134 XPGBWT-01-0000-
00FF7
XPGBWT-L1-0000-
00FF7
XPGBWT-H1-0000-
00FF7
R2 114 125 XPGBWT-01-0000-
00EF7
XPGBWT-L1-0000-
00EF7
XPGBWT-H1-0000-
00EF7
Q5 107 118 XPGBWT-L1-0000-
00DF7
XPGBWT-H1-0000-
00DF7
E7 3000 K
S2 148 163 XPGBWT-01-0000-
00JE7
R5 139 153 XPGBWT-01-0000-
00HE7
XPGBWT-L1-0000-
00HE7
XPGBWT-H1-0000-
00HE7
R4 130 143 XPGBWT-01-0000-
00GE7
XPGBWT-L1-0000-
00GE7
XPGBWT-H1-0000-
00GE7
R3 122 134 XPGBWT-01-0000-
00FE7
XPGBWT-L1-0000-
00FE7
XPGBWT-H1-0000-
00FE7
R2 114 125 XPGBWT-01-0000-
00EE7
XPGBWT-L1-0000-
00EE7
XPGBWT-H1-0000-
00EE7
XPGBWT-P1-0000-
00EE7
XPGBWT-U1-0000-
00EE7
Q5 107 118 XPGBWT-L1-0000-
00DE7
XPGBWT-H1-0000-
00DE7
XPGBWT-P1-0000-
00DE7
XPGBWT-U1-0000-
00DE7
Q4 100 110 XPGBWT-L1-0000-
00CE7
XPGBWT-H1-0000-
00CE7
XPGBWT-P1-0000-
00CE7
XPGBWT-U1-0000-
00CE7
Q3 93.9 103 XPGBWT-P1-0000-
00BE7
XPGBWT-U1-0000-
00BE7
Q2 87.4 96.1 XPGBWT-P1-0000-
00AE7
XPGBWT-U1-0000-
00AE7
P4 80.6 88.6 XPGBWT-P1-0000-
009E7
XPGBWT-U1-0000-
009E7
P3 73.9 81.2 XPGBWT-P1-0000-
008E7
XPGBWT-U1-0000-
008E7
FLUX CHARACTERISTICS (TJ
Copyright © 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark
of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specic product and/or
vendor endorsement, sponsorship or association.
8
XLamp® Xp-G2 LED
Notes
Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a
tolerance of ±2 on CRI measurements. See the Measurements section (page 26).
Cree XLamp XP-G2 LED order codes specify only a minimum ux bin and not a maximum. Cree may ship reels in ux bins higher than
the minimum specied by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions
specied by the order code.
* Flux values @ 25°C are calculated and for reference only.
Chromaticity 
 Order Codes
Kit CCT Code 
°C

 70 CRI Typical 80 CRI Typical 80 CRI Minimum 85 CRI Minimum 90 CRI Minimum
Z7 3000 K
R4 130 143 XPGBWT-L1-0000-
00GZ7
XPGBWT-H1-0000-
00GZ7
R3 122 134 XPGBWT-L1-0000-
00FZ7
XPGBWT-H1-0000-
00FZ7
R2 114 125 XPGBWT-L1-0000-
00EZ7
XPGBWT-H1-0000-
00EZ7
Q5 107 118 XPGBWT-L1-0000-
00DZ7
XPGBWT-H1-0000-
00DZ7
XPGBWT-P1-0000-
00DZ7
XPGBWT-U1-0000-
00DZ7
Q4 100 110 XPGBWT-L1-0000-
00CZ7
XPGBWT-H1-0000-
00CZ7
XPGBWT-P1-0000-
00CZ7
XPGBWT-U1-0000-
00CZ7
Q3 93.9 103 XPGBWT-P1-0000-
00BZ7
XPGBWT-U1-0000-
00BZ7
Q2 87.4 96.1 XPGBWT-P1-0000-
00AZ7
XPGBWT-U1-0000-
00AZ7
P4 80.6 88.6 XPGBWT-P1-0000-
009Z7
XPGBWT-U1-0000-
009Z7
P3 73.9 81.2 XPGBWT-P1-0000-
008Z7
XPGBWT-U1-0000-
008Z7
F8 2850 K
R4 130 143 XPGBWT-L1-0000-
00GF8
XPGBWT-H1-0000-
00GF8
R3 122 134 XPGBWT-L1-0000-
00FF8
XPGBWT-H1-0000-
00FF8
R2 114 125 XPGBWT-L1-0000-
00EF8
XPGBWT-H1-0000-
00EF8
Q5 107 118 XPGBWT-L1-0000-
00DF8
XPGBWT-H1-0000-
00DF8
XPGBWT-P1-0000-
00DF8
XPGBWT-U1-0000-
00DF8
Q4 100 110 XPGBWT-L1-0000-
00CF8
XPGBWT-H1-0000-
00CF8
XPGBWT-P1-0000-
00CF8
XPGBWT-U1-0000-
00CF8
Q3 93.9 103 XPGBWT-L1-0000-
00BF8
XPGBWT-H1-0000-
00BF8
XPGBWT-P1-0000-
00BF8
XPGBWT-U1-0000-
00BF8
Q2 87.4 96.1 XPGBWT-P1-0000-
00AF8
XPGBWT-U1-0000-
00AF8
P4 80.6 88.6 XPGBWT-P1-0000-
009F8
XPGBWT-U1-0000-
009F8
P3 73.9 81.2 XPGBWT-P1-0000-
008F8
XPGBWT-U1-0000-
008F8
P2 67.2 73.9 XPGBWT-P1-0000-
007F8
XPGBWT-U1-0000-
007F8
FLUX CHARACTERISTICS (TJ
Copyright © 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark
of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specic product and/or
vendor endorsement, sponsorship or association.
9
XLamp® Xp-G2 LED
Notes
Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a
tolerance of ±2 on CRI measurements. See the Measurements section (page 26).
Cree XLamp XP-G2 LED order codes specify only a minimum ux bin and not a maximum. Cree may ship reels in ux bins higher than
the minimum specied by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions
specied by the order code.
* Flux values @ 25°C are calculated and for reference only.
Chromaticity 
 Order Codes
Kit CCT Code 
°C

 70 CRI Typical 80 CRI Typical 80 CRI Minimum 85 CRI Minimum 90 CRI Minimum
E8 2700 K
R4 130 143 XPGBWT-L1-0000-
00GE8
XPGBWT-H1-0000-
00GE8
R3 122 134 XPGBWT-L1-0000-
00FE8
XPGBWT-H1-0000-
00FE8
R2 114 125 XPGBWT-L1-0000-
00EE8
XPGBWT-H1-0000-
00EE8
Q5 107 118 XPGBWT-L1-0000-
00DE8
XPGBWT-H1-0000-
00DE8
Q4 100 110 XPGBWT-L1-0000-
00CE8
XPGBWT-H1-0000-
00CE8
XPGBWT-P1-0000-
00CE8
XPGBWT-U1-0000-
00CE8
Q3 93.9 103 XPGBWT-L1-0000-
00BE8
XPGBWT-H1-0000-
00BE8
XPGBWT-P1-0000-
00BE8
XPGBWT-U1-0000-
00BE8
Q2 87.4 96.1 XPGBWT-P1-0000-
00AE8
XPGBWT-U1-0000-
00AE8
P4 80.6 88.6 XPGBWT-P1-0000-
009E8
XPGBWT-U1-0000-
009E8
P3 73.9 81.2 XPGBWT-P1-0000-
008E8
XPGBWT-U1-0000-
008E8
P2 67.2 73.9 XPGBWT-P1-0000-
007E8
XPGBWT-U1-0000-
007E8
Z8 2700 K
R3 122 134 XPGBWT-L1-0000-
00FZ8
XPGBWT-H1-0000-
00FZ8
R2 114 125 XPGBWT-L1-0000-
00EZ8
XPGBWT-H1-0000-
00EZ8
Q5 107 118 XPGBWT-L1-0000-
00DZ8
XPGBWT-H1-0000-
00DZ8
Q4 100 110 XPGBWT-L1-0000-
00CZ8
XPGBWT-H1-0000-
00CZ8
Q3 93.9 103 XPGBWT-L1-0000-
00BZ8
XPGBWT-H1-0000-
00BZ8
XPGBWT-P1-0000-
00BZ8
XPGBWT-U1-0000-
00BZ8
Q2 87.4 96.1 XPGBWT-P1-0000-
00AZ8
XPGBWT-U1-0000-
00AZ8
P4 80.6 88.6 XPGBWT-P1-0000-
009Z8
XPGBWT-U1-0000-
009Z8
P3 73.9 81.2 XPGBWT-P1-0000-
008Z8
XPGBWT-U1-0000-
008Z8
P2 67.2 73.9 XPGBWT-P1-0000-
007Z8
XPGBWT-U1-0000-
007Z8
FLUX CHARACTERISTICS (TJ
Copyright © 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark
of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specic product and/or
vendor endorsement, sponsorship or association.
10
XLamp® Xp-G2 LED
RELATIVE SPECTRAL POWER DISTRIBUTION
RELATIVE FLUX VS. JUNCTION TEMPERATURE (IFm
Relative Spectral Power
0%
20%
40%
60%
80%
100%
380 430 480 530 580 630 680 730 780
Relative Radiant Power
Wavelength (nm)
5000 K - 8300 K CCT
3700 K - 5000 K CCT
2600 K - 3700 K CCT
Relative Flux Output vs. Junction Temperature
0%
20%
40%
60%
80%
100%
120%
25 50 75 100 125 150
Relative Luminous Flux
Junction Temperature (ºC)
Copyright © 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark
of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specic product and/or
vendor endorsement, sponsorship or association.
11
XLamp® Xp-G2 LED
ELECTRICAL CHARACTERISTICS (TJ
RELATIVE FLUX VS. CURRENT (TJ
Electrical Characteristics (Tj = 25ºC)
0
250
500
750
1000
1250
1500
2.65 2.75 2.85 2.95 3.05 3.15
Forward Current (mA)
Forward Voltage (V)
Relative Intensity vs. Current (Tj = 25ºC)
0%
50%
100%
150%
200%
250%
300%
350%
0 250 500 750 1000 1250 1500
Relative Luminous Flux
Forward Current (mA)
Copyright © 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark
of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specic product and/or
vendor endorsement, sponsorship or association.
12
XLamp® Xp-G2 LED

* Warm White XLamp XP-G2 LEDs have a typical CRI of 80.
Delta CCT vs. Current
-0.020
-0.015
-0.010
-0.005
0.000
0.005
0.010
0.015
0.020
100 300 500 700 900 1100 1300 1500
Current (mA)
ΔCCy
Delta CCT vs Temp
-0.020
-0.015
-0.010
-0.005
0.000
0.005
0.010
0.015
0.020
25 50 75 100 125 150
Tsp (°C)
ΔCCx
ΔCCy
Copyright © 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark
of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specic product and/or
vendor endorsement, sponsorship or association.
13
XLamp® Xp-G2 LED
TYPICAL SPATIAL DISTRIBUTION
THERMAL DESIGN
The maximum forward current is determined by the thermal resistance between the LED junction and ambient. It is crucial for the end
product to be designed in a manner that minimizes the thermal resistance from the solder point to ambient in order to optimize lamp life
and optical characteristics.
Typical Spatial Radiation Pattern
0%
20%
40%
60%
80%
100%
-100 -80 -60 -40 -20 0 20 40 60 80 100
Relative Luminous Intensity
Angle (º)
Thermal Design
Cool White
0
200
400
600
800
1000
1200
1400
1600
0 20 40 60 80 100 120 140 160
Maximum Current (mA)
Ambient Temperature (ºC)
Rj-a = 10°C/W
Rj-a = 15°C/W
Rj-a = 20°C/W
Rj-a = 25°C/W
Copyright © 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark
of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specic product and/or
vendor endorsement, sponsorship or association.
14
XLamp® Xp-G2 LED
PERFORMANCE GROUPS LUMINOUS FLUX
XLamp XP-G2 LEDs are tested for luminous ux and placed into one of the following luminous-ux groups:
Group Code Minimum Luminous Flux

Maximum Luminous Flux

P2 67.2 73.9
P3 73.9 80.6
P4 80.6 87.4
Q2 87.4 93.9
Q3 93.9 100
Q4 100 107
Q5 107 114
R2 114 122
R3 122 130
R4 130 139
R5 139 148
S2 148 156
S3 156 164
S4 164 172
S5 172 182
Copyright © 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark
of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specic product and/or
vendor endorsement, sponsorship or association.
15
XLamp® Xp-G2 LED
PERFORMANCE GROUPS CHROMATICITY
Region x y Region x y Region x y Region x y
0A
0.2950 0.2970
0B
0.2920 0.3060
0C
0.2984 0.3133
0D
0.2984 0.3133
0.2920 0.3060 0.2895 0.3135 0.2962 0.3220 0.3048 0.3207
0.2984 0.3133 0.2962 0.3220 0.3028 0.3304 0.3068 0.3113
0.3009 0.3042 0.2984 0.3133 0.3048 0.3207 0.3009 0.3042
0R
0.2980 0.2880
0S
0.2895 0.3135
0T
0.2962 0.3220
0U
0.3037 0.2937
0.2950 0.2970 0.2870 0.3210 0.2937 0.3312 0.3009 0.3042
0.3009 0.3042 0.2937 0.3312 0.3005 0.3415 0.3068 0.3113
0.3037 0.2937 0.2962 0.3220 0.3028 0.3304 0.3093 0.2993
1A
0.3048 0.3207
1B
0.3028 0.3304
1C
0.3115 0.3391
1D
0.3130 0.3290
0.3130 0.3290 0.3115 0.3391 0.3205 0.3481 0.3213 0.3373
0.3144 0.3186 0.3130 0.3290 0.3213 0.3373 0.3221 0.3261
0.3068 0.3113 0.3048 0.3207 0.3130 0.3290 0.3144 0.3186
1R
0.3068 0.3113
1S
0.3005 0.3415
1T
0.3099 0.3509
1U
0.3144 0.3186
0.3144 0.3186 0.3099 0.3509 0.3196 0.3602 0.3221 0.3261
0.3161 0.3059 0.3115 0.3391 0.3205 0.3481 0.3231 0.3120
0.3093 0.2993 0.3028 0.3304 0.3115 0.3391 0.3161 0.3059
2A
0.3215 0.3350
2B
0.3207 0.3462
2C
0.3290 0.3538
2D
0.3290 0.3417
0.3290 0.3417 0.3290 0.3538 0.3376 0.3616 0.3371 0.3490
0.3290 0.3300 0.3290 0.3417 0.3371 0.3490 0.3366 0.3369
0.3222 0.3243 0.3215 0.3350 0.3290 0.3417 0.3290 0.3300
2R
0.3222 0.3243
2S
0.3196 0.3602
2T
0.3290 0.3690
2U
0.3290 0.3300
0.3290 0.3300 0.3290 0.3690 0.3381 0.3762 0.3366 0.3369
0.3290 0.3180 0.3290 0.3538 0.3376 0.3616 0.3361 0.3245
0.3231 0.3120 0.3207 0.3462 0.3290 0.3538 0.3290 0.3180
3A
0.3371 0.3490
3B
0.3376 0.3616
3C
0.3463 0.3687
3D
0.3451 0.3554
0.3451 0.3554 0.3463 0.3687 0.3551 0.3760 0.3533 0.3620
0.3440 0.3427 0.3451 0.3554 0.3533 0.3620 0.3515 0.3487
0.3366 0.3369 0.3371 0.3490 0.3451 0.3554 0.3440 0.3427
3R
0.3366 0.3369
3S
0.3381 0.3762
0.3440 0.3428 0.3480 0.3840
0.3429 0.3307 0.3463 0.3687
0.3361 0.3245 0.3376 0.3616
4A
0.3530 0.3597
4B
0.3548 0.3736
4C
0.3641 0.3804
4D
0.3615 0.3659
0.3615 0.3659 0.3641 0.3804 0.3736 0.3874 0.3702 0.3722
0.3590 0.3521 0.3615 0.3659 0.3702 0.3722 0.3670 0.3578
0.3512 0.3465 0.3530 0.3597 0.3615 0.3659 0.3590 0.3521
Copyright © 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark
of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specic product and/or
vendor endorsement, sponsorship or association.
16
XLamp® Xp-G2 LED
Region x y Region x y Region x y Region x y
5A1
0.3670 0.3578
5A2
0.3686 0.3649
5A3
0.3744 0.3685
5A4
0.3726 0.3612
0.3686 0.3649 0.3702 0.3722 0.3763 0.3760 0.3744 0.3685
0.3744 0.3685 0.3763 0.3760 0.3825 0.3798 0.3804 0.3721
0.3726 0.3612 0.3744 0.3685 0.3804 0.3721 0.3783 0.3646
5B1
0.3702 0.3722
5B2
0.3719 0.3797
5B3
0.3782 0.3837
5B4
0.3763 0.3760
0.3719 0.3797 0.3736 0.3874 0.3802 0.3916 0.3782 0.3837
0.3782 0.3837 0.3802 0.3916 0.3869 0.3958 0.3847 0.3877
0.3763 0.3760 0.3782 0.3837 0.3847 0.3877 0.3825 0.3798
5C1
0.3825 0.3798
5C2
0.3847 0.3877
5C3
0.3912 0.3917
5C4
0.3887 0.3836
0.3847 0.3877 0.3869 0.3958 0.3937 0.4001 0.3912 0.3917
0.3912 0.3917 0.3937 0.4001 0.4006 0.4044 0.3978 0.3958
0.3887 0.3836 0.3912 0.3917 0.3978 0.3958 0.3950 0.3875
5D1
0.3783 0.3646
5D2
0.3804 0.3721
5D3
0.3863 0.3758
5D4
0.3840 0.3681
0.3804 0.3721 0.3825 0.3798 0.3887 0.3836 0.3863 0.3758
0.3863 0.3758 0.3887 0.3836 0.3950 0.3875 0.3924 0.3794
0.3840 0.3681 0.3863 0.3758 0.3924 0.3794 0.3898 0.3716
6A1
0.3889 0.3690
6A2
0.3915 0.3768
6A3
0.3981 0.3800
6A4
0.3953 0.3720
0.3915 0.3768 0.3941 0.3848 0.4010 0.3882 0.3981 0.3800
0.3981 0.3800 0.4010 0.3882 0.4080 0.3916 0.4048 0.3832
0.3953 0.3720 0.3981 0.3800 0.4048 0.3832 0.4017 0.3751
6B1
0.3941 0.3848
6B2
0.3968 0.3930
6B3
0.4040 0.3966
6B4
0.4010 0.3882
0.3968 0.3930 0.3996 0.4015 0.4071 0.4052 0.4040 0.3966
0.4040 0.3966 0.4071 0.4052 0.4146 0.4089 0.4113 0.4001
0.4010 0.3882 0.4040 0.3966 0.4113 0.4001 0.4080 0.3916
6C1
0.4080 0.3916
6C2
0.4113 0.4001
6C3
0.4186 0.4037
6C4
0.4150 0.3950
0.4113 0.4001 0.4146 0.4089 0.4222 0.4127 0.4186 0.4037
0.4186 0.4037 0.4222 0.4127 0.4299 0.4165 0.4259 0.4073
0.4150 0.3950 0.4186 0.4037 0.4259 0.4073 0.4221 0.3984
6D1
0.4017 0.3751
6D2
0.4048 0.3832
6D3
0.4116 0.3865
6D4
0.4082 0.3782
0.4048 0.3832 0.4080 0.3916 0.4150 0.3950 0.4116 0.3865
0.4116 0.3865 0.4150 0.3950 0.4221 0.3984 0.4183 0.3898
0.4082 0.3782 0.4116 0.3865 0.4183 0.3898 0.4147 0.3814
7A1
0.4147 0.3814
7A2
0.4183 0.3898
7A3
0.4242 0.3919
7A4
0.4203 0.3833
0.4183 0.3898 0.4221 0.3984 0.4281 0.4006 0.4242 0.3919
0.4242 0.3919 0.4281 0.4006 0.4342 0.4028 0.4300 0.3939
0.4203 0.3833 0.4242 0.3919 0.4300 0.3939 0.4259 0.3853

Copyright © 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark
of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specic product and/or
vendor endorsement, sponsorship or association.
17
XLamp® Xp-G2 LED
Region x y Region x y Region x y Region x y
7B1
0.4221 0.3984
7B2
0.4259 0.4073
7B3
0.4322 0.4096
7B4
0.4281 0.4006
0.4259 0.4073 0.4299 0.4165 0.4364 0.4188 0.4322 0.4096
0.4322 0.4096 0.4364 0.4188 0.4430 0.4212 0.4385 0.4119
0.4281 0.4006 0.4322 0.4096 0.4385 0.4119 0.4342 0.4028
7C1
0.4342 0.4028
7C2
0.4385 0.4119
7C3
0.4449 0.4141
7C4
0.4403 0.4049
0.4385 0.4119 0.4430 0.4212 0.4496 0.4236 0.4449 0.4141
0.4449 0.4141 0.4496 0.4236 0.4562 0.4260 0.4513 0.4164
0.4403 0.4049 0.4449 0.4141 0.4513 0.4164 0.4465 0.4071
7D1
0.4259 0.3853
7D2
0.4300 0.3939
7D3
0.4359 0.3960
7D4
0.4316 0.3873
0.4300 0.3939 0.4342 0.4028 0.4403 0.4049 0.4359 0.3960
0.4359 0.3960 0.4403 0.4049 0.4465 0.4071 0.4418 0.3981
0.4316 0.3873 0.4359 0.3960 0.4418 0.3981 0.4373 0.3893
8A1
0.4373 0.3893
8A2
0.4418 0.3981
8A3
0.4475 0.3994
8A4
0.4428 0.3906
0.4418 0.3981 0.4465 0.4071 0.4523 0.4085 0.4475 0.3994
0.4475 0.3994 0.4523 0.4085 0.4582 0.4099 0.4532 0.4008
0.4428 0.3906 0.4475 0.3994 0.4532 0.4008 0.4483 0.3919
8B1
0.4465 0.4071
8B2
0.4513 0.4164
8B3
0.4573 0.4178
8B4
0.4523 0.4085
0.4513 0.4164 0.4562 0.4260 0.4624 0.4274 0.4573 0.4178
0.4573 0.4178 0.4624 0.4274 0.4687 0.4289 0.4634 0.4193
0.4523 0.4085 0.4573 0.4178 0.4634 0.4193 0.4582 0.4099
8C1
0.4582 0.4099
8C2
0.4634 0.4193
8C3
0.4695 0.4207
8C4
0.4641 0.4112
0.4634 0.4193 0.4687 0.4289 0.4750 0.4304 0.4695 0.4207
0.4695 0.4207 0.4750 0.4304 0.4813 0.4319 0.4756 0.4221
0.4641 0.4112 0.4695 0.4207 0.4756 0.4221 0.4700 0.4126
8D1
0.4483 0.3919
8D2
0.4532 0.4008
8D3
0.4589 0.4021
8D4
0.4538 0.3931
0.4532 0.4008 0.4582 0.4099 0.4641 0.4112 0.4589 0.4021
0.4589 0.4021 0.4641 0.4112 0.4700 0.4126 0.4646 0.4034
0.4538 0.3931 0.4589 0.4021 0.4646 0.4034 0.4593 0.3944

Copyright © 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark
of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specic product and/or
vendor endorsement, sponsorship or association.
18
XLamp® Xp-G2 LED
CREE’S STANDARD CHROMATICITY REGIONS PLOTTED ON THE 1931 CIE CURVE
ANSI Cool White
Neutral White
5000 K
5700 K
6500 K
8000 K
0A
0B
0C
0D
0R
0S
0T
0U
1A
1B
1C
1D
2A
2B
2C
2D
3A
3B
1R
1S
1T
1U
2R
2S
2T
2U
3R
3S
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
CCy
CCx
ANSI
C78.377A
3500 K
4000 K
4500 K
5000 K
3A
3B
3C
3D
4A
4B
4C
4D
3R
3S
3T
3U
4R
4S
4T
4U
5R
5S
5T
5U
5A1
5A2
5A3
5A4
5B1
5B2
5B3
5B4
5C1
5C2
5C3
5C4
5D1
5D2
5D3
5D4 6A1
6A2
6A3
6A4
6B1
6B2
6B3
6B4
6C1
6C2
6C3
6C4
6D1
6D2
6D3
6D4
6R
6S
6T
6U
0.32
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
CCy
CCx
ANSI
C78.377A
Copyright © 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark
of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specic product and/or
vendor endorsement, sponsorship or association.
19
XLamp® Xp-G2 LED
CREE’S STANDARD CHROMATICITY REGIONS PLOTTED ON THE 1931 CIE CURVE - CONTINUED
ANSI Neutral White and ANSI Warm White
2700 K
3000 K
3500 K
4000 K
4500 K
5000 K
3A
3B
3C
3D
4A
4B
4C
4D 5A1
5A2
5A3
5A4
5B1
5B2
5B3
5B4
5C1
5C2
5C3
5C4
5D1
5D2
5D3
5D46A1
6A2
6A3
6A4
6B1
6B2
6B3
6B4
6C1
6C2
6C3
6C4
6D1
6D2
6D3
6D4
7A1
7A2 7A3
7A4
7B1
7B2 7B3
7B4 7C1
7C2 7C3
7C4
7D1
7D2 7D3
7D48A1
8A2 8A3
8A4
8B1
8B2 8B3
8B4 8C1
8C2 8C3
8C4
8D1
8D28D3
8D4
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.45
0.46
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.45
0.46
0.47
0.48
0.49
CCy
CCx
ANSI
C78.377A
Copyright © 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark
of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specic product and/or
vendor endorsement, sponsorship or association.
20
XLamp® Xp-G2 LED
CREE’S STANDARD COOL WHITE KITS PLOTTED ON ANSI STANDARD CHROMATICITY REGIONS
5000 K
5700 K
6500 K
8000 K
0A
0B
0C
0D
0R
0S
0T
0U
1A
1B
1C
1D
2A
2B
2C
2D
3A
3B
1R
1S
1T
1U
2R
2S
2T
2U
3R
3S
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
CCy
CCx
ANSI
C78.377A
50
5000 K
5700 K
6500 K
8000 K
0A
0B
0C
0D
0R
0S
0T
0U
1A
1B
1C
1D
2A
2B
2C
2D
3A
3B
1R
1S
1T
1U
2R
2S
2T
2U
3R
3S
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
CCy
CCx
ANSI
C78.377A
51
5000 K
5700 K
6500 K
8000 K
0A
0B
0C
0D
0R
0S
0T
0U
1A
1B
1C
1D
2A
2B
2C
2D
3A
3B
1R
1S
1T
1U
2R
2S
2T
2U
3R
3S
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
CCy
CCx
ANSI
C78.377A
53
5000 K
5700 K
6500 K
8000 K
0A
0B
0C
0D
0R
0S
0T
0U
1A
1B
1C
1D
2A
2B
2C
2D
3A
3B
1R
1S
1T
1U
2R
2S
2T
2U
3R
3S
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
CCy
CCx
ANSI
C78.377A
E1
5000 K
5700 K
6500 K
8000 K
0A
0B
0C
0D
0R
0S
0T
0U
1A
1B
1C
1D
2A
2B
2C
2D
3A
3B
1R
1S
1T
1U
2R
2S
2T
2U
3R
3S
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
CCy
CCx
ANSI
C78.377A
E2
Copyright © 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark
of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specic product and/or
vendor endorsement, sponsorship or association.
21
XLamp® Xp-G2 LED
CREE’S STANDARD WARM AND NEUTRAL WHITE KITS PLOTTED ON ANSI STANDARD CHROMATICITY REGIONS
2700 K
3000 K
3500 K
4000 K
4500 K
5000 K
3A
3B
3C
3D
4A
4B
4C
4D 5A1
5A2
5A3
5A4
5B1
5B2
5B3
5B4
5C1
5C2
5C3
5C4
5D1
5D2
5D3
5D4 6A1
6A2
6A3
6A4
6B1
6B2
6B3
6B4
6C1
6C2
6C3
6C4
6D1
6D2
6D3
6D4 7A1
7A2 7A3
7A4
7B1
7B2 7B3
7B4 7C1
7C2 7C3
7C4
7D1
7D2 7D3
7D4 8A1
8A2 8A3
8A4
8B1
8B2 8B3
8B4 8C1
8C2 8C3
8C4
8D1
8D2 8D3
8D4
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.45
0.46
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.45
0.46
0.47
0.48
0.49
CCy
CCx
ANSI
C78.377A
E3
E4
E5
E6
E8
E7
2700 K
3000 K
3500 K
4000 K
4500 K
5000 K
3A
3B
3C
3D
4A
4B
4C
4D 5A1
5A2
5A3
5A4
5B1
5B2
5B3
5B4
5C1
5C2
5C3
5C4
5D1
5D2
5D3
5D4 6A1
6A2
6A3
6A4
6B1
6B2
6B3
6B4
6C1
6C2
6C3
6C4
6D1
6D2
6D3
6D4 7A1
7A2 7A3
7A4
7B1
7B2 7B3
7B4 7C1
7C2 7C3
7C4
7D1
7D2 7D3
7D4 8A1
8A2 8A3
8A4
8B1
8B2 8B3
8B4 8C1
8C2 8C3
8C4
8D1
8D2 8D3
8D4
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.45
0.46
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.45
0.46
0.47
0.48
0.49
CCy
CCx
ANSI
C78.377A
F4
F6
F7
F5
F8
Copyright © 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark
of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specic product and/or
vendor endorsement, sponsorship or association.
22
XLamp® Xp-G2 LED
CREE’S STANDARD WARM AND NEUTRAL WHITE KITS PLOTTED ON ANSI STANDARD CHROMATICITY REGIONS -
CONTINUED
2700 K
3000 K
3500 K
4000 K
4500 K
5000 K
3A
3B
3C
3D
4A
4B
4C
4D 5A1
5A2
5A3
5A4
5B1
5B2
5B3
5B4
5C1
5C2
5C3
5C4
5D1
5D2
5D3
5D4 6A1
6A2
6A3
6A4
6B1
6B2
6B3
6B4
6C1
6C2
6C3
6C4
6D1
6D2
6D3
6D4 7A1
7A2 7A3
7A4
7B1
7B2 7B3
7B4 7C1
7C2 7C3
7C4
7D1
7D2 7D3
7D4 8A1
8A2 8A3
8A4
8B1
8B2 8B3
8B4 8C1
8C2 8C3
8C4
8D1
8D2 8D3
8D4
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.45
0.46
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.45
0.46
0.47
0.48
0.49
CCy
CCx
ANSI
C78.377A
Z6
Z7
Z5
Z8
Copyright © 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark
of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specic product and/or
vendor endorsement, sponsorship or association.
23
XLamp® Xp-G2 LED
CREE’S STANDARD CHROMATICITY KITS
The following table provides the chromaticity bins associated with chromaticity kits.
Color CCT Kit Chromaticity Bins
Cool
White
6200 K 51 0A, 0B, 0C, 0D, 0R, 0S, 0T, 0U, 1A, 1B, 1C, 1D, 1R, 1S, 1T, 1U, 2A, 2B, 2C, 2D, 2R, 2S, 2T, 2U, 3A, 3B, 3R, 3S
6000 K 53 1A, 1B, 1C, 1D, 1R, 1S, 1T, 1U, 2A, 2B, 2C, 2D, 2R, 2S, 2T, 3A, 3B, 3S
6200 K 50 1A, 1B, 1C, 1D, 2A, 2B, 2C, 2D
6500 K E1 1A, 1B, 1C, 1D
5700 K E2 2A, 2B, 2C, 2D
Neutral
White
5000 K E3 3A, 3B, 3C, 3D
4750 K F4 3C, 3D, 4A, 4B
4500 K E4 4A, 4B, 4C, 4D
4250 K F5 4C, 4D, 5A1, 5A2, 5A3, 5A4, 5B1, 5B2, 5B3, 5B4
4000 K E5 5A1, 5A2, 5A3, 5A4, 5B1, 5B2, 5B3, 5B4, 5C1, 5C2, 5C3, 5C4, 5D1, 5D2, 5D3, 5D4
4000 K Z5 5A3, 5B4, 5C1, 5D2
Warm
White
3750 K F6 5C1, 5C2, 5C3, 5C4, 5D1, 5D2, 5D3, 5D4, 6A1, 6A2, 6A3, 6A4, 6B1, 6B2, 6B3, 6B4
3500 K E6 6A1, 6A2, 6A3, 6A4, 6B1, 6B2, 6B3, 6B4, 6C1, 6C2, 6C3, 6C4, 6D1, 6D2, 6D3, 6D4
3500 K Z6 6A3, 6B4, 6C1, 6D2
3250 K F7 6C1, 6C2, 6C3, 6C4, 6D1, 6D2, 6D3, 6D4, 7A1, 7A2, 7A3, 7A4, 7B1, 7B2, 7B3, 7B4
3000 K E7 7A1, 7A2, 7A3, 7A4, 7B1, 7B2, 7B3, 7B4, 7C1, 7C2, 7C3, 7C4, 7D1, 7D2, 7D3, 7D4
3000 K Z7 7A3, 7B4, 7C1, 7D2
2850 K F8 7C1, 7C2, 7C3, 7C4, 7D1, 7D2, 7D3, 7D4, 8A1, 8A2, 8A3, 8A4, 8B1, 8B2, 8B3, 8B4
2700 K E8 8A1, 8A2, 8A3, 8A4, 8B1, 8B2, 8B3, 8B4, 8C1, 8C2, 8C3, 8C4, 8D1, 8D2, 8D3, 8D4
2700 K Z8 8A3, 8B4, 8C1, 8D2
Copyright © 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark
of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specic product and/or
vendor endorsement, sponsorship or association.
24
XLamp® Xp-G2 LED
BIN AND ORDER CODE FORMATS
XP-G2 bin codes and order codes are congured in the following manner:
Order Code Bin Code
SSSCCC-BD-HHHH-NNNNN
Internal code
Color
BWT = Gen 2 White
Series
XPG = XP-G
Color specification
01 = Outdoor White
B1 = 70 CRI minimum
L1 = Standard CRI
H1 = 80 CRI minimum
P1 = 85 CRI minimum
U1 = 90 CRI minimum
Kit number
SSSCCC-BD-WWW-FF-G-AA
Internal code
Chromaticity bin
Color
BWT = Gen 2 White
Series
XPG = XP-G
Color specification
01 = Outdoor White
B1 = 70 CRI minimum
L1 = Standard CRI
H1 = 80 CRI minimum
P1 = 85 CRI minimum
U1 = 90 CRI minimum
Luminous flux group
Copyright © 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark
of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specic product and/or
vendor endorsement, sponsorship or association.
25
XLamp® Xp-G2 LED
REFLOW SOLDERING CHARACTERISTICS
In testing, Cree has found XLamp XP-G2 LEDs to be compatible with JEDEC J-STD-020C, using the parameters listed below. As a general
guideline, Cree recommends that users follow the recommended soldering prole provided by the manufacturer of the solder paste used,
and therefore it is the lamp or luminaire manufacturer’s responsibility to determine applicable soldering requirements.
Note that this general guideline may not apply to all PCB designs and congurations of reow soldering equipment.
Profile Feature Lead-Free Solder
Average Ramp-Up Rate (Tsmax to Tp)1.2°C/second
Preheat: Temperature Min (Tsmin) 120 °C
Preheat: Temperature Max (Tsmax)170 °C
Preheat: Time (tsmin to tsmax) 65-150 seconds
Time Maintained Above: Temperature (TL)217 °C
Time Maintained Above: Time (tL) 45-90 seconds
Peak/Classication Temperature (Tp) 235 - 245 °C
Time Within 5°C of Actual Peak Temperature (tp) 20-40 seconds
Ramp-Down Rate 1 - 6 °C/second
Time 25°C to Peak Temperature 4 minutes max.
Note: All temperatures refer to topside of the package, measured on the package body surface.
IPC/JEDEC J-STD-020C
TP
TL
Temperature
Time
t 25˚C to Peak
Preheat
ts
tS
tP
25
Ramp-down
Ramp-up
Critical Zone
TL to TP
Tsmax
Tsmin
Copyright © 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark
of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specic product and/or
vendor endorsement, sponsorship or association.
26
XLamp® Xp-G2 LED
NOTES
Measurements
The luminous ux, radiant power, chromaticity, forward voltage and CRI measurements in this document are binning specications only
and solely represent product measurements as of the date of shipment. These measurements will change over time based on a number
of factors that are not within Crees control and are not intended or provided as operational specications for the products. Calculated
values are provided for informational purposes only and are not intended or provided as specications.

Please read the LED Reliability Overview for details of the qualication process Cree applies to ensure long-term reliability for XLamp
LEDs and details of Crees pre-release qualication testing for XLamp LEDs.
Lumen Maintenance
Cree now uses standardized IES LM-80-08 and TM-21-11 methods for collecting long-term data and extrapolating LED lumen maintenance.
For information on the specic LM-80 data sets available for this LED, refer to the public LM-80 results document.
Please read the Long-Term Lumen Maintenance application note for more details on Crees lumen maintenance testing and forecasting.
Please read the Thermal Management application note for details on how thermal design, ambient temperature, and drive current affect
the LED junction temperature.
Moisture Sensitivity
Cree recommends keeping XLamp LEDs in the provided, resealable moisture-barrier packaging (MBP) until immediately prior to soldering.
Unopened MBPs that contain XLamp LEDs do not need special storage for moisture sensitivity.
Once the MBP is opened, XLamp XP-G2 LEDs may be stored as MSL 1 per JEDEC J-STD-033, meaning they have unlimited oor life in
conditions of 30 ºC/85% relative humidity (RH). Regardless of the storage condition, Cree recommends sealing any unsoldered LEDs
in the original MBP.
RoHS Compliance
The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold
limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as
implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Cree representative or from tthe Product
Ecology section of the Cree website.
REACh Compliance
REACh substances of very high concern (SVHCs) information is available for this product. Since the European Chemical Agency (ECHA)
has published notice of their intent to frequently revise the SVHC listing for the foreseeable future, please contact a Cree representative
to insure you get the most up-to-date REACh Declaration. REACh banned substance information (REACh Article 67) is also available upon
request.
Copyright © 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark
of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specic product and/or
vendor endorsement, sponsorship or association.
27
XLamp® Xp-G2 LED
UL® Recognized Component
This product meets the requirements to be considered a UL Recognized Component with Level 4 enclosure consideration. The LED
package or a portion thereof has been investigated as a re and electrical enclosure per ANSI/UL 8750.
Vision Advisory
WARNING: Do not look at an exposed lamp in operation. Eye injury can result. For more information about LEDs and eye safety, please
refer to the LED Eye Safety application note.
NOTES - CONTINUED
Copyright © 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark
of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specic product and/or
vendor endorsement, sponsorship or association.
28
XLamp® Xp-G2 LED
MECHANICAL DIMENSIONS (TA
Thermal vias, if present, are not shown on these drawings.
All measurements are ±.13 mm unless otherwise indicated.
Side View
Top View
SIZE
TITLE
OF
REV.
SHEET
C
DRAWING NO.
DATE
DATE
DATE
CHECK
FINAL PROTECTIVE FINISH
MATERIAL
APPROVED
DRAWN BY
THIRD ANGLE PROJECTION
SCALE
A
B
C
D
123456
6 5 4 3 2 1
A
B
C
D
Phone (919) 313-5300
Fax (919) 313-5558
4600 Silicon Drive
Durham, N.C 27703
UNAUTHORIZED PERSON WITHOUT
THE WRITTEN CONSENT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
CONTAINED WITHIN ARE THE PROPRIETARY AND
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
OF CREE INC.
NOTICE
X° ± .5°
.XXX ± .25
.XX ± .75
.X ± 1.5
FOR SHEET METAL PARTS ONLY
.XX ± .25
.XXX ± .125
X° ± .5°
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN
MILLIMETERS AND AFTER FINISH.
TOLERANCE UNLESS SPECIFIED:
SURFACE FINISH:
1.6
3.30
3.30
.73
2.26
R1.53
1.30
.50
2.30
.50
3.45
3.45
.58
.50
3.30
2.30
.64
.25
.75
1.01
3.30
.50
3.30
.50
1.30
3.30
3.30 REF.
3.30 REF.
1/122.000
C
2610-00066
OUTLINE DRAWING XPG G3
10/6/15D. CRONIN
REVISONS
REV DESCRIPTION BY DATE APP'D
RECOMMENDED PCB SOLDER PAD RECOMMENDED STENCIL PATTERN
(HATCHED AREA IS OPENING)
ALL DIMENSIONS ARE ±.13MM UNLESS OTHERWISE NOTED
PRIMARY ALTERNATIVE
OPTICAL
REFERENCE
OPTICAL
REFERENCE
Bottom View Alternate Bottom View
Anode
Anode
SIZE
TITLE
OF
REV.
SHEET
C
DRAWING NO.
DATE
DATE
DATE
CHECK
FINAL PROTECTIVE FINISH
MATERIAL
APPROVED
DRAWN BY
THIRD ANGLE PROJECTION
SCALE
A
B
C
D
123456
6 5 4 3 2 1
A
B
C
D
Phone (919) 313-5300
Fax (919) 313-5558
4600 Silicon Drive
Durham, N.C 27703
UNAUTHORIZED PERSON WITHOUT
THE WRITTEN CONSENT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
CONTAINED WITHIN ARE THE PROPRIETARY AND
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
OF CREE INC.
NOTICE
X° ± .5°
.XXX ± .25
.XX ± .75
.X ± 1.5
FOR SHEET METAL PARTS ONLY
.XX ± .25
.XXX ± .125
X° ± .5°
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN
MILLIMETERS AND AFTER FINISH.
TOLERANCE UNLESS SPECIFIED:
SURFACE FINISH:
1.6
3.30
3.30
.73
2.26
R1.53
1.30
.50
2.30
.50
3.45
3.45
.58
.50
3.30
2.30
.64
.25
.75
1.01
3.30
.50
3.30
.50
1.30
3.30
3.30 REF.
3.30 REF.
1/122.000
C
2610-00066
OUTLINE DRAWING XPG G3
10/6/15D. CRONIN
REVISONS
REV DESCRIPTION BY DATE APP'D
RECOMMENDED PCB SOLDER PAD RECOMMENDED STENCIL PATTERN
(HATCHED AREA IS OPENING)
ALL DIMENSIONS ARE ±.13MM UNLESS OTHERWISE NOTED
PRIMARY ALTERNATIVE
OPTICAL
REFERENCE
OPTICAL
REFERENCE
SIZE
TITLE
OF
REV.
SHEET
C
DRAWING NO.
DATE
DATE
DATE
CHECK
FINAL PROTECTIVE FINISH
MATERIAL
APPROVED
DRAWN BY
THIRD ANGLE PROJECTION
SCALE
A
B
C
D
123456
6 5 4 3 2 1
A
B
C
D
Phone (919) 313-5300
Fax (919) 313-5558
4600 Silicon Drive
Durham, N.C 27703
UNAUTHORIZED PERSON WITHOUT
THE WRITTEN CONSENT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
CONTAINED WITHIN ARE THE PROPRIETARY AND
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
OF CREE INC.
NOTICE
X° ± .5°
.XXX ± .25
.XX ± .75
.X ± 1.5
FOR SHEET METAL PARTS ONLY
.XX ± .25
.XXX ± .125
X° ± .5°
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN
MILLIMETERS AND AFTER FINISH.
TOLERANCE UNLESS SPECIFIED:
SURFACE FINISH:
1.6
3.30
3.30
.73
2.26
R1.53
1.30
.50
2.30
.50
3.45
3.45
.58
.50
3.30
2.30
.64
.25
.75
1.01
3.30
.50
3.30
.50
1.30
3.30
3.30 REF.
3.30 REF.
1/122.000
C
2610-00066
OUTLINE DRAWING XPG G3
10/6/15D. CRONIN
REVISONS
REV DESCRIPTION BY DATE APP'D
RECOMMENDED PCB SOLDER PAD RECOMMENDED STENCIL PATTERN
(HATCHED AREA IS OPENING)
ALL DIMENSIONS ARE ±.13MM UNLESS OTHERWISE NOTED
PRIMARY ALTERNATIVE
OPTICAL
REFERENCE
OPTICAL
REFERENCE
Copyright © 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark
of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specic product and/or
vendor endorsement, sponsorship or association.
29
XLamp® Xp-G2 LED
MECHANICAL DIMENSIONS (TA
All measurements are ±.13 mm unless otherwise indicated.
Notes:
Cree recommends using thermal pad kickouts to maximize component thermal performance.
Cree recommends using white solder mask material to minimize system optical loss.
* This stencil has been tested and optimized for the avoidance of voiding when using ALPHA® LUMET® P30 Maxrel solder paste. For
other solder pastes, a “window pane” design for the thermal pad stencil may result in a lower voiding percentage. Contact your local
Cree Field Applications Engineer for consultation regarding your specic application.
Recommended Solder Pad


SIZE
TITLE
OF
REV.
SHEET
C
DRAWING NO.
DATE
DATE
DATE
CHECK
FINAL PROTECTIVE FINISH
MATERIAL
APPROVED
DRAWN BY
THIRD ANGLE PROJECTION
SCALE
A
B
C
D
123456
6 5 4 3 2 1
A
B
C
D
Phone (919) 313-5300
Fax (919) 313-5558
4600 Silicon Drive
Durham, N.C 27703
UNAUTHORIZED PERSON WITHOUT
THE WRITTEN CONSENT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
CONTAINED WITHIN ARE THE PROPRIETARY AND
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
OF CREE INC.
NOTICE
X° ± .5°
.XXX ± .25
.XX ± .75
.X ± 1.5
FOR SHEET METAL PARTS ONLY
.XX ± .25
.XXX ± .125
X° ± .5°
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN
MILLIMETERS AND AFTER FINISH.
TOLERANCE UNLESS SPECIFIED:
SURFACE FINISH:
1.6
3.30
3.30
.73
2.26
R1.53
1.30
.50
2.30
.50
3.45
3.45
.58
3.30 REF.
3.30 REF.
3.50
.70
.30
1.50
.30
3.50
3.30
.50
.50
1.30
.50
3.30
.90
.25
.90
.25
3.20
.40
.72
.96
.72
3.20
1/122.000
D
2610-00066
OUTLINE DRAWING XPG G3
10/6/15D. CRONIN
REVISONS
REV DESCRIPTION BY DATE APP'D
RECOMMENDED SOLDER PAD
(SOLDER RESIST PATTERN)
ALL DIMENSIONS ARE ± .13MM UNLESS OTHERWISE NOTED
PRIMARY ALTERNATIVE
OPTICAL
REFERENCE
RECOMMENDED COPPER LAYOUT
RECOMMENDED STENCIL OPENINGS
OPTICAL
REFERENCE
Recommended Copper Layout
Copyright © 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark
of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specic product and/or
vendor endorsement, sponsorship or association.
30
XLamp® Xp-G2 LED
TAPE AND REEL
All Cree carrier tapes conform to EIA-481D, Automated Component Handling Systems Standard.
All dimensions in mm.
SIZE
TITLE
OF
REV.
SHEET
C
DRAWING NO.
DATE
DATE
DATE
CHECK
FINAL PROTECTIVE FINISH
MATERIAL
APPROVED
DRAWN BY
THIRD ANGLE PROJECTION
SCALE
A
B
C
D
123456
6 5 4 3 2 1
A
B
C
D
Phone (919) 313-5300
Fax (919) 313-5558
4600 Silicon Drive
Durham, N.C 27703
UNAUTHORIZED PERSON WITHOUT
THE WRITTEN CONSENT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
CONTAINED WITHIN ARE THE PROPRIETARY AND
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
OF CREE INC.
NOTICE
± .5 °
.XXX ± .25
.XX ± .75
.X ± 1.5
FOR SHEET METAL PARTS ONLY
.XX ± .25
.XXX ± .125
± .5 °
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN
MILLIMETERS AND AFTER FINISH.
TOLERANCE UNLESS SPECIFIED:
SURFACE FINISH:
1.6
Trailer
160mm (min) of
empty pockets
sealed with tape
(20 pockets min.)
Loaded Pockets
(1000 Lamps)
Leader
400mm (min.) of
empty pockets with
at least 100mm
sealed by tape
(50 empty pockets min.)
12.0
+.3
-.0
1.75
±.10
4±.1
8±.1 2.5±.1
1/13.000
B
2402-00014
XP HEW LOADING SPEC
--
--
----
----
11/29/10D. CRONIN
REVISONS
REV DESCRIPTION BY DATE APP'D
B
ADDED CATHODE AND ANODE NOTE
REORIENTED DEVICE
DC 2/26/12
END START
User Feed Direction
CATHODE SIDE
ANODE SIDE
User Feed Direction
7"
1.5± .1
13mm
Pocket Tape
Carrier Tape
Ø13
Ø61 ± 0.5
12.40 0
+
2.00
MEASURED AT HUB
12.40
MEASURED AT INSIDE EDGE
16.40
SHEET 1 OF 1
1:2
2400-00005
SIZE
TITLE
REV.
C
DRAWING NO.
DATE
DATE
DATE
CHECK
FINAL PROTECTIVE FINISH
MATERIAL
APPROVED
DRAWN BY
THIRD ANGLE PROJECTION
.X ± 0.3
X° ± 2°
.XX ± .10
.X ± .25
FOR SHEET METAL PARTS ONLY
.XX ± .13
X° ± 1°
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN
MILLIMETERS & BEFORE FINISH.
TOLERANCE UNLESS SPECIFIED:
SCALE
A
B
C
D
1
23456
65432
1
A
B
C
D
Phone (919) 361-4770
4600 Silicon Drive
Durham, N.C 27703
NOTICE
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
CONTAINED WITHIN ARE THE PROPRIETARY AND
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT
OF CREE, INC.
Reel,
7" x 12mm Wide
B
LIUDEZHI
2012/5/25
PS
Ø190
½öÓÃÓÚÆÀ¹À¡£
°æȨËùÓÐ (c) by Foxit Software Company, 2004
ÓÉ Foxit PDF Editor ±à¼-
OD 7.5''
Ø13
Ø61 ± 0.5
12.40 0
+
2.00
MEASURED AT HUB
12.40
MEASURED AT INSIDE EDGE
16.40
SHEET 1 OF 1
1:2
2400-00005
SIZE
TITLE
REV.
C
DRAWING NO.
DATE
DATE
DATE
CHECK
FINAL PROTECTIVE FINISH
MATERIAL
APPROVED
DRAWN BY
THIRD ANGLE PROJECTION
.X ± 0.3
X° ± 2°
.XX ± .10
.X ± .25
FOR SHEET METAL PARTS ONLY
.XX ± .13
X° ± 1°
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN
MILLIMETERS & BEFORE FINISH.
TOLERANCE UNLESS SPECIFIED:
SCALE
A
B
C
D
1
23456
65432
1
A
B
C
D
Phone (919) 361-4770
4600 Silicon Drive
Durham, N.C 27703
NOTICE
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
CONTAINED WITHIN ARE THE PROPRIETARY AND
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT
OF CREE, INC.
Reel,
7" x 12mm Wide
B
LIUDEZHI
2012/5/25
PS
Ø190
½öÓÃÓÚÆÀ¹À¡£
°æȨËùÓÐ (c) by Foxit Software Company, 2004
ÓÉ Foxit PDF Editor ±à¼-
OD 7.5''
Y
Y
XX
REF 0.59
W
F(III)
P1
D1
1.5 MIN.
Bo
Ao
R0.2
TYPICAL
REF 4.375
Ko
Other material available.(IV)
(III)
(II)
(I)
hole to centerline of pocket.
Measured from centerline of sprocket
holes is ± 0.20.
Cumulative tolerance of 10 sprocket
to centerline of pocket.
Measured from centerline of sprocket hole
SECTION Y-Y
SECTION X-X
2.0 ±0.05 (I)
P2
1.55 ±0.05
Do
4.0 ±0.1 (II)
Po
1.75 ±0.1
E1
0.30 ±0.05
T
REF R 2.24
2.40Ko +0.0/-0.1
3.70
1
W
F
P
+/- 0.05
+/- 0.1
+0.3/-0.1
5.50
8.00
12.00
Ao 3.70 +/- 0.1
Bo +/- 0.1
Y
Y
XX
REF 0.59
W
F(III)
P1
D1
1.5 MIN.
Bo
Ao
R0.2
TYPICAL
REF 4.375
Ko
Other material available.(IV)
(III)
(II)
(I)
hole to centerline of pocket.
Measured from centerline of sprocket
holes is ± 0.20.
Cumulative tolerance of 10 sprocket
to centerline of pocket.
Measured from centerline of sprocket hole
SECTION Y-Y
SECTION X-X
2.0 ±0.05 (I)
P2
1.55 ±0.05
Do
4.0 ±0.1 (II)
Po
1.75 ±0.1
E1
0.30 ±0.05
T
REF R 2.24
2.40Ko +0.0/-0.1
3.70
1
W
F
P
+/- 0.05
+/- 0.1
+0.3/-0.1
5.50
8.00
12.00
Ao 3.70 +/- 0.1
Bo +/- 0.1
Y
Y
XX
REF 0.59
W
F(III)
P1
D1
1.5 MIN.
Bo
Ao
R0.2
TYPICAL
REF 4.375
Ko
Other material available.(IV)
(III)
(II)
(I)
hole to centerline of pocket.
Measured from centerline of sprocket
holes is ± 0.20.
Cumulative tolerance of 10 sprocket
to centerline of pocket.
Measured from centerline of sprocket hole
SECTION Y-Y
SECTION X-X
2.0 ±0.05 (I)
P2
1.55 ±0.05
Do
4.0 ±0.1 (II)
Po
1.75 ±0.1
E1
0.30 ±0.05
T
REF R 2.24
2.40Ko +0.0/-0.1
3.70
1
W
F
P
+/- 0.05
+/- 0.1
+0.3/-0.1
5.50
8.00
12.00
Ao 3.70 +/- 0.1
Bo +/- 0.1
CATHODE SIDE
ANODE SIDE
Copyright © 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark
of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specic product and/or
vendor endorsement, sponsorship or association.
31
XLamp® Xp-G2 LED
PACKAGING
Patent Label
(on bottom of box)
Label with Cree Bin Code,
Quantity, Reel ID
Label with Cree Bin Code,
Quantity, Reel ID
Label with Cree Order Code,
Quantity, Reel ID, PO #
Label with Cree Order Code,
Quantity, Reel ID, PO #
Label with Cree Bin Code,
Quantity, Reel ID
Unpackaged Reel
Packaged Reel
Boxed Reel
CREE Bin Code
& Barcode Label
Vacuum-Sealed
Moisture Barrier Bag
Label with Customer
P/N, Qty, Lot #, PO #
Label with Cree Bin
Code, Qty, Lot #
Label with Cree Bin
Code, Qty, Lot #
Vacuum-Sealed
Moisture Barrier Bag
Patent Label
Label with Customer Order
Code, Qty, Reel ID, PO #