4700.0021.H - Schurter - Datasheet.Directory

Power Entry Modules with Line Filter 5707

https://www.schurter.com /PG06

EMC Products

IEC Appliance Inlet C14 or C18 with Filter, Protection Degree IP65 into the Appliance, Fuseholder 1- or

2-pole, Front or Rear Mounting

5707.xxxx.xx2 Mounting from front side 5707.xxxx.xxx.22 with IP 54 V-Lock cord con-

nection

5707 with IP 54 Inlet Gasket

Approvals and Compliances

C14

70° C

C18

70° C

Description

- Panel Mount :

Screw-on version from front or rear side , Screws with sealing are in-

cluded

- 4 Functions :

Appliance Inlet protection class I or II , Line filter in standard and medi-

cal version , Fuseholder for fuse-links 5 x 20 mm , IP 65 protection into

the appliance

- For front side mounting versions a sealing kit IP 54 for the power sup-

ply connection is available as an accessory: 4700.0021

- Option suffix ".22" offers IP 54 for the power input in combination with

V-Lock cordsets

- Quick connect terminals 6.3 x 0.8 mm

Unique Selling Proposition

- Sealed power entry module

- Strong in Design and Safety

- IP 65 protection to the appliance

- IP 54 protection to the cord connection

Characteristics

- Extreme robust design

- All single elements are already wired

- Screw type fuse carrier, slotted

- With EMC-shield

- Especially for applications in rough environments (see technical data)

- Suitable for use in equipment according to IEC/UL 60950

Suitable for use in medical equipment according to IEC/UL 60601-1

Other versions on request

- With solder terminals

- Class X1- and Y1-capacitors for enhanced withstand voltage

- Medical version M80

- Additional factory-mounted sealing (IP54) of power input

- Version with current rating 3 A

Weblinks

pdf datasheet, html-datasheet, General Product Information, Distributor-

Stock-Check, Accessories, Detailed request for product, Microsite

Newly available variants corresponding to V-Lock mating cordset. The connector is equipped with a notch intended for use with the latching cordset.

The cord latching system prevents against accidental removal of the cordset.

Technical Data

Ratings IEC 1 - 8 A @ Ta 40 °C / 250 VAC; 50 Hz

Ratings UL/CSA 1 - 8 A @ Ta 40 °C / 125 VAC; 60 Hz

Leakage Current standard < 0.5 mA (250 V / 60 Hz)

medical < 5 µA (250 V / 60 Hz)

Dielectric Strength > 1.7 kVDC between L-N

> 2.7 kVDC between L/N-PE

Test voltage (2 sec)

Allowable Operation Tempe-

rature

-25 °C to 85 °C

Climatic Category 25/085/21 acc. to IEC 60068-1

IP-Protection from front side IP 65 acc. to IEC 60529

from rear-side IP 65 acc. to IEC 60529

Protection Class Suitable for appliances with protection

class I or II acc. to IEC 61140

Terminal Quick connect terminals 6.3 x 0.8 mm

Panel Thickness S Screw, max 3 mm

Mounting screw torque max 0.8 Nm

2 screws M3 with sealing are provided

Material: Housing black / white / metallic, UL 94V-0

appliance inlet/-outlet C14 / C18 acc. to IEC 60320-1

UL 498, CSA C22.2 no. 42 (for cold

conditions) pin-temperature 70 °C, 8 A,

Protection Class I or II

Fuseholder 1 or 2 pole, Shocksafe category PC2

acc. to IEC 60127-6,

for fuse-links 5 x 20 mm

Rated Power Acceptance @

Ta 23 °C

5 x 20: 1.6 W 1-pole/ 1,2 W 2-pole per

pole

Power Acceptance @ Ta >

23°C

Admissible power acceptance at higher

ambient temperature see derating cur-

ves

Line Filter Standard and Medical Version, IEC

60939, UL 1283, CSA C22.2 no. 8

Technical Details

MTBF > 2'800'000 h acc. to MIL-HB-217 F

Approvals and Compliances

Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about

Approvals

Power Entry Modules with Line Filter

5707 https://www.schurter.com /PG06

EMC Products

Approvals

The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products.

Approval Reference Type: 5707

Approval Logo Certificates Certification Body Description

VDE Approvals VDE Certificate Number: 40016382

UL Approvals UL UL File Number: E72928

Product standards

Product standards that are referenced

Organization Design Standard Description

Designed according to IEC 60320-1 Appliance couplers for household and similar general purposes

Designed according to IEC 60939 Passive filters for suppressing electromagnetic interference

Designed according to IEC 60127-6 Miniature fuses. Part 6. Fuse-holders for miniature fuse-links

Designed according to IEC 61058-1 Switches for appliances. Part 1. General requirements

Designed according to UL 498 Standard for Attachment Plugs and Receptacles

Designed according to UL 1283 Electromagnetic interference filters

Designed according to CSA C22.2 no. 42 General Use Receptacles, Attachment Plugs, and Similar Wiring Devices

Designed according to CSA C22.2 no. 8 Electromagnetic interference (EMI) filters

Application standards

Application standards where the product can be used

Organization Design Standard Description

Designed for applications acc. IEC/UL 60950 IEC 60950-1 includes the basic requirements for the safety of information

technologyequipment.

Designed for applications acc. IEC 60601-1 Medical electrical equipment - Part 1: General requirements for basic

safety and essential performance

Designed for applications acc. IEC 60335-1 Safety of electrical appliances for household and similar purposes. Meets

the requirements for appliances in unattended use. This includes the en-

hanced requirements of glow wire tests acc. to IEC 60695-2-12 and -13.

Compliances

The product complies with following Guide Lines

Identification Details Initiator Description

CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable

requirements laid down in the harmonisation of Community legislation on

its affixing in accordance with EU Regulation 765/2008.

RoHS SCHURTER AG EU Directive RoHS 2011/65/EU

China RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March

2007. It is similar to the EU directive RoHS.

REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration,

Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as

"REACH") entered into force.

MicrositeV-Lock SCHURTER AG V-Lock system are based on a matching plug-dose combination. The

connector is equipped with a notch intended for use with the latching

cordset. The cord latching system prevents against accidental removal of

the cordset.

Medical Equipment SCHURTER AG Suitable for use in medical equipment according to IEC/UL 60601-1

Power Entry Modules with Line Filter 5707

https://www.schurter.com /PG06

EMC Products

Dimension [mm]

Mounting from front side

ø 3.4

32.2

29.2

30 12 43.6 29

R3.2

0.5

+0.20

±0.15

R4.5

R1.5

59.6 36

3.5

ø 3.2

±0.20

R2.5

Mounting from rear side

R1.5

ø 3.4

33.5

30.5

30 12 43.6 29

R3.2

0.5

+0.20

±0.15

R4.5

R1.5

59.6 36

3.5

3x0.5

±0.20

Assembly Instructions

Mounting sealing kit IP 54 for the power supply (only for frontside moun-

ting)

1) Power entry module with factory-mounted inlet gasket

2) Chassis

3) Pillar

4) Gasket ring

5) Crinkle washer

6) Nut

7) Retaining clip

Mating cordsets to sealing kit

Part no Country plug Cable length Cross section Color

6000.0214 open end 2.0 m 3x1 mm2 black

6003.0215 EURO plug 2.5 m 3x1 mm2 black

6004.0215 EURO plug 2.5 m 3x1 mm2 black

6007.0212 EURO plug 1.0 m 3x1 mm2 black

6007.0214 IEC plug 2.0 m 3x1 mm2 black

6004.0114 EURO plug 2.0 m 3x0.75 mm2 black

6026.0215 Italy 2.5 m 3x1 mm2 black

6009.1315 North America 2.5 m 3x18 AWG black

6047.6414 Japan 2.0 m 3x0.75 mm2 black

6009.1214 North America 2.0 m 3x18 AWG black

6011.0215 Switzerland 2.5 m 3x1 mm2 black

6044.0215 United Kingdom 2.5 m 3x1 mm2 black

Power Entry Modules with Line Filter

5707 https://www.schurter.com /PG06

EMC Products

Mounting standard version

3141

A3/4

A) front view

B) detail front mounting type

C) detail rear mounting type

1) sealing of flange

2) sealing of fuseholder

3) sealing of screw hole (front mounting type: sealing ring on screw head)

4) sealing of screw hole (rear mounting type: sealing on screw thread)

Important:

- use supplied fuse caps (2) and mounting screws (3/4)

- optimal sealing requires even and solid panel opening

- recommended tightening torque for mounting screws (2/3/4): 0.5-0.8 Nm

- IP65 protection between the inlet and connector pins, but no IP rating between the connector pins and the plug of the power cord!

Technical Data of Filter-Components

Rated Current

[A]

Filter-Type Inductances

L [mH]

Capacitance

CX [nF]

Capacitance

CY [nF]

R [MΩ]

1Standard Version 2 x 12 100 2.2 1

2Standard Version 2 x 5.2 100 2.2 1

4Standard Version 2 x 2 100 2.2 1

6Standard Version 2 x 0.8 100 2.2 1

8Standard Version 2 x 0.4 100 2.2 1

1Medical Version (M5) 2 x 12 100 - 1

2Medical Version (M5) 2 x 5.2 100 - 1

4Medical Version (M5) 2 x 2 100 - 1

6Medical Version (M5) 2 x 0.8 100 - 1

8Medical Version (M5) 2 x 0.4 100 - 1

2Medical Version (M80) 2 x 5.2 100 0.47 1

Diagrams

Standard version

PE'

RCy

1) Line

2) Load

Medical version M5

PE'

1) Line

2) Load

Power Entry Modules with Line Filter 5707

https://www.schurter.com /PG06

EMC Products

Derating Curves

1-pole

Admissible power

acceptance in Watt

020406080 100

0.2

0.0

I = << In

I = 0.7 In

I = 1.0 In

1.6

0.6

0.4

0.8

1.2

1.0

1.4

Ambient air temperature Ta °C

2-pole

Admissible power

acceptance in Watt

020406080 100

0.0

I = << In

I = 0.7 In

I = 1.0 In

1.2

0.2

0.4

0.8

0.6

1.0

Ambient Air Temperature Ta °C

Attenuation Loss - - - - 50Ω differential mode _____ 50Ω common mode

Standard version

1 A 2 A 4 A 6 A

8 A

Medical version (M5)

1 A 2 A 4 A 6 A

8 A

All Variants

Rated Cur-

rent [A]

Filter-Type Mounting side Cord retai-

ning kits

Protection Class Power Cord

IP-protection

Fuseholder Color V-Lock Order Number

1Standard Version Front Side - I - 1-pole

black

5707.0101.112

1Standard Version Rear Side - I - 1-pole

black

5707.0101.113

2Standard Version Front Side - I - 1-pole

black

5707.0201.112

Power Entry Modules with Line Filter

5707 https://www.schurter.com /PG06

EMC Products

Rated Cur-

rent [A]

Filter-Type Mounting side Cord retai-

ning kits

Protection Class Power Cord

IP-protection

Fuseholder Color V-Lock Order Number

2Standard Version Rear Side - I - 1-pole

black

5707.0201.113

4Standard Version Front Side - I - 1-pole

black

5707.0401.112

4Standard Version Rear Side - I - 1-pole

black

5707.0401.113

6Standard Version Front Side - I - 1-pole

black

5707.0601.112

6Standard Version Rear Side - I - 1-pole

black

5707.0601.113

8Standard Version Front Side - I - 1-pole

black

5707.0801.112

8Standard Version Rear Side - I - 1-pole

black

5707.0801.113

1Standard Version Front Side - I - 2-pole

black

5707.0101.312

1Standard Version Rear Side - I - 2-pole

black

5707.0101.313

2Standard Version Front Side - I - 2-pole

black

5707.0201.312 █

2Standard Version Rear Side - I - 2-pole

black

5707.0201.313

4Standard Version Front Side - I - 2-pole

black

5707.0401.312 █

4Standard Version Rear Side - I - 2-pole

black

5707.0401.313 █

4Standard Version Rear Side - I IP 54 2-pole

black

l5707.0401.313.22

6Standard Version Front Side - I - 2-pole

black

5707.0601.312

6Standard Version Rear Side - I - 2-pole

black

5707.0601.313

8Standard Version Front Side - I - 2-pole

black

5707.0801.312 █

8Standard Version Front Side - I IP 54 2-pole

black

5707.0801.312.01

8Standard Version Rear Side - I - 2-pole

black

5707.0801.313

8Standard Version Rear Side - I - 2-pole

black

l5707.0801.313.21

1Medical Version (M5) Front Side - I - 2-pole

black

5707.0103.312

1Medical Version (M5) Rear Side - I - 2-pole

black

5707.0103.313

1Medical Version (M5) Rear Side - I - 2-pole

black

l5707.0103.313.21

2Medical Version (M5) Front Side - I - 2-pole

black

5707.0203.312

2Medical Version (M5) Rear Side - I - 2-pole

black

5707.0203.313

2Medical Version (M5) Rear Side - I - 2-pole

black

l5707.0203.313.21

4Medical Version (M5) Rear Side - I IP 54 2-pole

black

l3-100-897

4Medical Version (M5) Front Side - I - 2-pole

black

5707.0403.312

4Medical Version (M5) Rear Side - I - 2-pole

black

5707.0403.313 █

4Medical Version (M5) Rear Side - I - 2-pole

black

l5707.0403.313.21

6Medical Version (M5) Front Side - I - 2-pole

black

5707.0603.312

6Medical Version (M5) Rear Side - I - 2-pole

black

5707.0603.313

6Medical Version (M5) Rear Side - I - 2-pole

black

l5707.0603.313.21

6Medical Version (M5) Front Side - I - 2-pole

white

5707.0613.312

6Medical Version (M5) Front Side - I - 2-pole

white

l5707.0613.312.21

6Medical Version (M5) Rear Side - I - 2-pole

white

5707.0613.313

6Medical Version (M5) Rear Side - I - 2-pole

white

l5707.0613.313.21

8Medical Version (M5) Front Side - I - 2-pole

black

5707.0803.312

8Medical Version (M5) Front Side - I IP 54 2-pole

black

l5707.0803.312.22

8Medical Version (M5) Rear Side - I - 2-pole

black

5707.0803.313

8Medical Version (M5) Rear Side - I - 2-pole

black

l5707.0803.313.21

1Medical Version (M5) Front Side - II - 2-pole

black

5707.0103.412

1Medical Version (M5) Rear Side - II - 2-pole

black

5707.0103.413

2Medical Version (M5) Front Side - II - 2-pole

black

5707.0203.412

2Medical Version (M5) Rear Side - II - 2-pole

black

5707.0203.413

4Medical Version (M5) Front Side - II - 2-pole

black

5707.0403.412

4Medical Version (M5) Rear Side - II - 2-pole

black

5707.0403.413

Power Entry Modules with Line Filter 5707

https://www.schurter.com /PG06

EMC Products

Rated Cur-

rent [A]

Filter-Type Mounting side Cord retai-

ning kits

Protection Class Power Cord

IP-protection

Fuseholder Color V-Lock Order Number

6Medical Version (M5) Front Side - II - 2-pole

black

5707.0603.412

6Medical Version (M5) Rear Side - II - 2-pole

black

5707.0603.413

8Medical Version (M5) Front Side - II - 2-pole

black

5707.0803.412

8Medical Version (M5) Rear Side - II - 2-pole

black

5707.0803.413

2Medical Version (M80) Front Side - I IP 54 2-pole

black

5707.0205.312.01

█ Most Popular.

Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER

Packaging unit 10 Pcs

Accessories

Description

Wire Harness

Wire harness for SCHURTER products

Assorted Covers

Rear Cover

0859.0047

Mating Outlets/Connectors

Category / Description

Connector Overview complete

4782 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4782

4022 Mounting: Power Supply Cord, 3 x 1.5 mm², Screw clamps, Connector: IEC C13 4022

4785 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4785

4300-06 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4300-06

4012 Mounting: Power Supply Cord, 3 x 1.5 mm², Screw clamps, Connector: IEC C13 4012

Connector further types to 5707 ...

Interconnection Cord Overview complete

Cord Sets 10 A, Interconnection, 2.0 m, IEC H05VV-F3G1.0, black 6007.0204

Cord Sets 10 A, Interconnection, 1.0 m, Connector IEC C13, H05VV-F3G1.0, black 6007.0212

Cord Sets 10 A, Interconnection, 2.0 m, Connector IEC C13, H05VV-F3G1.0, black 6007.0214

Interconnection Cord further types to 5707

Power Entry Modules with Line Filter

5707 https://www.schurter.com /PG06

EMC Products

Category / Description

Power Supply Cord Overview complete

Cord Sets 10 A, Europlug, 2.5 m, Connector IEC C13, H05VV-F3G1.0, black 6004.0215

Cord Sets 10 A, Europlug, 2.5 m, Connector IEC C13, H05VV-F3G1.0, black 6003.0215

Cord Sets 10 A, uninsulated wires, 2.0 m, Connector IEC C13, H05VV-F3G1.0, black 6000.0224

Cord Sets 10 A, uninsulated wires, 2.0 m, Connector IEC C13, H05VV-F3G1.0, black 6000.0214

Cord Sets 10 A, United Kingdom, 2.5 m, Connector IEC C13, H05VV-F3G1.0, black 6044.0215

Power Supply Cord further types to 5707 ...

Power Supply or Interconnection Cord Overview complete

Cord Sets 10 A, United Kingdom, 2.0 m, Connector IEC H05VV-F3G1.0, black 6044.0204

Power Supply or Interconnection Cord further types to 5707

Mating Outlets/Connectors shuttered

Power Cord Overview complete

VAC13KS, Overview, diverse Connector IEC C13, cord end: VAC13KS

Power cord with IEC connector C17, V-Lock, straight VAC17KS

Power Cord further types to 5707

The specifications, descriptions and illustrations indicated in this document are based on current

information. All content is subject to modifications and amendments. Information furnished is believed

to be accurate and reliable. However, users should independently evaluate the suitability and test each

product selected for their own applications.

02.12.2017

Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

Schurter:

5707.1001.312 5707.1001.313 5707.0601.212 5707.0201.413 5707.1003.312 5707.1003.313 5707.0603.313.01

5707.0601.313.01 5707.0405.312.01 5707.0601.312.01 5707.0201.312.01 4700.0021.H 5707.0603.312.01

4700.0021 5707.0203.312.01