MagneTek/Triad Magnetek Triad Power Transformers N World Series Visit MagneTek/TriadOs website at www.magnetek.com Chassis Mount, Dual Bobbin, 115/230 V Magnetek chassis mount world series transformers are designed to meet U.S. and international standards including CSA, IEC, VDE and UL requirements. The transformers consist of a dual bobbin design positioned inside an insulating shroud, and constructed with UL approved high temperature material. This design eliminates the need for electrostatic shielding since there is minimal capacitance between coils when using a dual bobbin configuration. The primary and secondary are both electrically isolated from each other, and from the core itself. Chassis Mount World Series transformers are available in sizes ranging from 25 VA to 175 VA, and are equipped with convenient Oquick connectO terminations. Technical Notes: 1. Hi pot tested at 4000 RMS. 2. Both primary and secondary coils may be connected as either series or parallel, but both must be used simultaneously. Specifications. Primary: 115/230 V, 50/60 Hz. Secondary Stock No. Mfr.Os Type Fig. VA Size Series* 967-8000 967-8001 967-8002 967-8003 967-8004 VPS10-2500 VPS10-4300 VPS10-8000 VPS10-13000 VPS10-17500 A A B B B 25 43 80 130 175 10.0 V C.T. @ 2.50 A 10.0 V C.T. @ 4.30 A 10.0 V C.T. @ 8.00 A 10.0 V C.T. @ 13.0 A 10.0 V C.T. @ 17.5 A 967-8005 967-8006 967-8007 967-8008 967-9001 VPS12-2000 VPS12-3400 VPS12-6300 VPS12-10300 VPS12-14000 A A B B B 25 43 80 130 175 967-8009 967-8010 967-8011 967-8012 967-9000 VPS16-1600 VPS16-2700 VPS16-5000 VPS16-8100 VPS16-11000 A A B B B 967-8013 967-8015 967-8016 967-8017 967-8018 VPS20-1250 VPS20-4000 VPS20-6500 VPS20-8800 VPS24-1000 967-8019 967-8020 967-8021 967-8022 967-8023 Dimensions Parallel H W 5.0 V @ 5.00 A 5.0 V @ 8.60 A 5.0 V @ 16.0 A 5.0 V @ 26.0 A 5.0 V @ 35.0 A 25/16 211/16 3 33/8 33/4 213/16 31/ 8 21/ 2 213/16 31/ 8 12.6 V C.T. @ 2.00 A 12.6 V C.T. @ 3.40 A 12.6 V C.T. @ 6.30 A 12.6 V C.T. @ 10.3 A 12.6 V C.T. @ 14.0 A 6.3 V @ 4.00 A 6.3 V @ 6.80 A 6.3 V @ 12.6 A 6.3 V @ 20.6 A 6.3 V @ 28.0 A 25/16 211/16 3 33/8 33/4 25 43 80 130 175 16.0 V C.T. @ 1.60 A 16.0 V C.T. @ 2.70 A 16.0 V C.T. @ 5.00 A 16.0 V C.T. @ 8.10 A 16.0 V C.T. @ 11.0 A 8.0 V @ 3.20 A 8.0 V @ 5.40 A 8.0 V @ 10.0 A 8.0 V @ 16.2 A 8.0 V @ 22.0 A A B B B A 25 80 130 175 25 20.0 V C.T. @ 1.25 A 20.0 V C.T. @ 4.00 A 20.0 V C.T. @ 6.50 A 20.0 V C.T. @ 8.80 A 24.0 V C.T. @ 1.00 A VPS24-1800 VPS24-3300 VPS24-5400 VPS24-7300 VPS28-900 A B B B A 43 80 130 175 25 967-8024 967-8025 967-8026 967-8027 967-8028 VPS28-1500 VPS28-2800 VPS28-4600 VPS28-6250 VPS36-700 A B B B A 43 80 130 175 25 967-8029 967-8030 967-8031 967-8032 967-8033 VPS36-1200 VPS36-2200 VPS36-3600 VPS36-4800 VPS230-110 967-8034 967-8035 967-8036 967-8037 VPS230-190 VPS230-350 VPS230-570 VPS230-760 C 1 15/16 2 2 25/ 16 2 5/16 N 2 11/16 N 2 13/16 N 11/ 8 11/ 8 13/ 8 15/ 8 15/ 8 5/16 5/16 213/16 31/ 8 21/ 2 213/16 31/ 8 1 15/16 2 2 25/ 16 2 5/16 N 2 11/16 N 2 13/16 N 11/ 8 11/ 8 13/ 8 15/ 8 15/ 8 5/16 5/16 25/16 211/16 3 33/8 33/4 213/16 31/ 8 21/ 2 213/16 31/ 8 1 15/16 2 2 25/ 16 2 5/16 N 11 2 /16 N 2 13/16 N 11/ 8 11/ 8 13/ 8 15/ 8 15/ 8 5/16 5/16 10.0 V @ 2.50 A 10.0 V @ 8.00 A 10.0 V @ 13.0 A 10.0 V @ 17.6 A 12.0 V @ 2.00 A 25/16 3 33/8 33/4 25/16 213/16 21/ 2 213/16 31/ 8 213/16 1 15/16 2 2 5/16 N 2 11/16 N 2 13/16 N 1 15/16 2 11/ 8 13/ 8 15/ 8 15/ 8 11/ 8 5/16 5/16 3/ 16 3/ 16 5/16 3/ 16 24.0 V C.T. @ 1.80 A 24.0 V C.T. @ 3.30 A 24.0 V C.T. @ 5.40 A 24.0 V C.T. @ 7.30 A 28.0 V C.T. @ 0.90 A 12.0 V @ 3.60 A 12.0 V @ 6.60 A 12.0 V @ 10.8 A 12.0 V @ 14.6 A 14.0 V @ 1.86 A 211/16 3 33/8 33/4 25/16 31/ 8 21/ 2 213/16 31/ 8 213/16 2 25/ 16 2 5/16 N 2 11/16 N 2 13/16 N 1 15/16 2 11/ 8 13/ 8 15/ 8 15/ 8 11/ 8 5/16 3/ 16 3/ 8 5/16 1/ 4 3/ 16 28.0 V C.T. @ 1.50 A 28.0 V C.T. @ 2.80 A 28.0 V C.T. @ 4.60 A 28.0 V C.T. @ 6.25 A 36.0 V C.T. @ 0.70 A 14.0 V @ 3.00 A 14.0 V @ 5.60 A 14.0 V @ 9.20 A 14.0 V @ 12.5 A 18.0 V @ 1.40 A 211/16 3 33/8 33/4 25/16 31/ 8 21/ 2 213/16 31/ 8 213/16 2 25/ 16 2 5/16 N 2 11/16 N 2 13/16 N 15 1 /16 2 11/ 8 13/ 8 15/ 8 15/ 8 11/ 8 5/16 3/ 16 3/ 8 5/16 1/ 4 3/ 16 A B B B A 43 36.0 V C.T. @ 1.20 A 18.0 V @ 2.40 A 80 36.0 V C.T. @ 2.20 A 18.0 V @ 4.40 A 130 36.0 V C.T. @ 3.60 A 18.0 V @ 7.20 A 175 36.0 V C.T. @ 4.80 A 18.0 V @ 9.60 A 25 230.0 V C.T. @ 0.11 A 115.0 V @ 0.22 A 211/16 3 33/8 33/4 25/16 31/ 8 21/ 2 213/16 31/ 8 213/16 2 25/ 16 2 5/16 N 2 11/16 N 2 13/16 N 1 15/16 2 11/ 8 13/ 8 15/ 8 15/ 8 11/ 8 5/16 3/ 16 3/ 8 5/16 1/ 4 3/ 16 A B B B 43 80 130 175 211/16 3 33/8 33/4 31/ 8 21/ 2 213/16 31/ 8 2 25/ 16 2 5/16 N 2 11/16 N 2 13/16 N 11/ 8 13/ 8 15/ 8 15/ 8 5/16 3/ 16 3/ 8 1/ 4 115.0 V @ 0.38 A 115.0 V @ 0.70 A 115.0 V @ 1.14 A 115.0 V @ 1.52 A A Terminals B 230.0 V C.T. @ 0.19 A 230.0 V C.T. @ 0.35 A 230.0 V C.T. @ 0.57 A 230.0 V C.T. @ 0.76 A D 5/16 3/ 8 3/ 8 5/16 3/ 8 3/ 8 5/16 3/ 8 3/ 8 3/ 8 3/ 8 5/16 3/ 8 5/16 3/ 8 5/16 3/ 8 5/16 3/ 8 3/ 16 3/ 16 3/ 16 1/ 4 1/ 4 3/ 16 3/ 16 3/ 16 1/ 4 1/ 4 3/ 16 3/ 16 3/ 16 1/ 4 1/ 4 1/ 4 1/ 4 3/ 16 1/ 4 3/ 16 1/ 4 3/ 16 1/ 4 3/ 16 1/ 4 Mounting MW ML EACH 1-9 23/8 N 213/16 N 2 2 1/4 21/4 2 1/2 21/2 2 1/2 12.85 16.39 22.40 29.65 34.05 23/8 N 213/16 N 2 2 1/4 21/4 2 1/2 21/2 2 1/2 12.85 16.39 22.40 29.65 34.05 23/8 N 213/16 N 2 2 1/4 21/4 2 1/2 21/2 2 1/2 12.85 16.39 22.40 29.65 34.05 23/8 2 21/4 21/2 23/8 N 2 1/4 2 1/2 2 1/2 N 12.85 22.40 29.65 34.05 12.85 213/16 N 2 2 1/4 21/4 2 1/2 21/2 2 1/2 23/8 N 16.39 22.40 29.65 34.05 12.85 213/16 N 2 2 1/4 21/4 2 1/2 21/2 2 1/2 23/8 N 16.39 22.40 29.65 34.05 12.85 213/16 N 2 2 1/4 21/4 2 1/2 1 2 /2 2 1/2 23/8 N 16.39 22.40 29.65 34.05 12.85 213/16 N 2 2 1/4 21/4 2 1/2 21/2 2 1/2 16.39 22.87 29.65 34.05 *CT N WIth a center tap. PC Mount, Dual Bobbin, 115/230 V Magnetek PC mount world series transformers incorporate a dual bobbin construction with an insulating shroud, both made of a high temperature material that exceeds UL flammability requirements. These units are designed with very high isolation between the primary and secondary, and also, between each winding and the core. Since the dual bobbin construction effectively reduces capacitance, electrostatic shielding is not required. PC Mount transformers are available with ratings from 2.5 VA to 56.0 VA and have dimensionally accurate pin placement for through hole PC board mounting. All World Series transformers meet U.S. and international standards including CSA, IEC, VDE and UL requirements, and, therefore, have universal application. Technical Notes: 1. Hi pot tested at 4000 RMS. 2. Both primary and secondary coils may be connected as either series or parallel, but both must be used simultaneously. Specifications. Primary: 115/230 V, 50/60 Hz. VA Ranges: 2.5 to 56.0. Secondary Dimensions Stock No. Mfr.Os Type VA Size Series* Parallel 967-8038 967-8039 967-8040 967-8041 967-8042 967-8043 VPP10-250 VPP10-500 VPP10-1000a VPP10-2000a VPP10-3000 VPP10-5600 2.5 5.0 10.0 20.0 30.0 56.0 10.0 V C.T. @ 0.25 A 10.0 V C.T. @ 0.50 A 10.0 V C.T. @ 1.00 A 10.0 V C.T. @ 2.00 A 10.0 V C.T. @ 3.00 A 10.0 V C.T. @ 5.60 A 5.0 V @ 0.50 A 5.0 V @ 1.00 A 5.0 V @ 2.00 A 5.0 V @ 4.00 A 5.0 V @ 6.00 A 5.0 V @ 11.2 A 967-8044 967-8045 967-8046 967-8047 967-8048 967-8049 VPP12-200 VPP12-400 VPP12-800a VPP12-1600a VPP12-2400 VPP12-4400 2.5 5.0 10.0 20.0 30.0 56.0 12.6 V C.T. @ 0.20 A 12.6 V C.T. @ 0.40 A 12.6 V C.T. @ 0.80 A 12.6 V C.T. @ 1.60 A 12.6 V C.T. @ 2.40 A 12.6 V C.T. @ 4.40 A 967-8050 967-8051 967-8052 967-8053 967-8054 967-8055 VPP16-150 VPP16-310 VPP16-620a VPP16-1250a VPP16-1900 VPP16-3500 2.5 5.0 10.0 20.0 30.0 56.0 967-8056 967-8057 967-8058 967-8059 967-8060 967-8061 VPP20-120 VPP20-250 VPP20-500a VPP20-1000a VPP20-1500 VPP20-2800 967-8062 967-8063 967-8064 967-8065 967-8066 967-8067 H W Mounting EACH D A B C ML MD MW 1-9 15/8 11/8 13/8 15/8 17/8 13/8 15/8 21/4 19/16 25/8 13 1 /16 3 1 5/16 1 5/16 1 9/16 1 7/8 2 3/16 2 1/2 0.200 0.200 0.200 0.400 0.550 0.600 0.250 0.400 0.400 0.400 0.275 0.300 1.000 1.000 1.140 1.460 1.680 1.900 11/ 16 11/ 16 11/ 4 11/ 2 N N N N N N 13/4 2 N N N N 23/16 21/2 8.03 8.64 9.68 11.78 13.54 16.56 6.3 V @ 0.40 A 6.3 V @ 0.80 A 6.3 V @ 1.60 A 6.3 V @ 3.20 A 6.3 V @ 4.80 A 6.3 V @ 8.80 A 15/8 11/8 15/8 13/8 13/8 17/8 21/4 15/8 19/16 25/8 113/16 3 1 5/16 1 5/16 1 9/16 1 7/8 2 3/16 2 1/2 0.200 0.200 0.200 0.400 0.550 0.600 0.250 0.400 0.400 0.400 0.275 0.300 1.000 1.000 1.140 1.460 1.680 1.900 11/ 16 11/ 16 11/ 4 11/ 2 N N N N N N 13/4 2 N N N N 23/16 21/2 8.03 8.64 6.36 11.78 13.54 16.56 16.0 V C.T. @ 0.15 A 16.0 V C.T. @ 0.31 A 16.0 V C.T. @ 0.62 A 16.0 V C.T. @ 1.25 A 16.0 V C.T. @ 1.90 A 16.0 V C.T. @ 3.50 A 8.0 V @ 0.30 A 8.0 V @ 0.62 A 8.0 V @ 1.25 A 8.0 V @ 2.50 A 8.0 V @ 3.80 A 8.0 V @ 7.00 A 15/8 11/8 13/8 15/8 3 17/8 1 /8 15/8 21/4 19/16 25/8 113/16 3 1 5/16 1 5/16 1 9/16 1 7/8 2 3/16 2 1/2 0.200 0.200 0.200 0.400 0.550 0.600 0.250 0.400 0.400 0.400 0.275 0.300 1.000 1.000 1.140 1.460 1.680 1.900 11/ 16 11/ 16 11/ 4 11/ 2 N N N N N N 13/4 2 N N N N 23/16 21/2 8.03 8.64 9.68 11.78 13.54 16.56 2.5 5.0 10.0 20.0 30.0 56.0 20.0 V C.T. @ 0.12 A 20.0 V C.T. @ 0.25 A 20.0 V C.T. @ 0.50 A 20.0 V C.T. @ 1.00 A 20.0 V C.T. @ 1.50 A 20.0 V C.T. @ 2.80 A 10.0 V @ 0.24 A 10.0 V @ 0.50 A 10.0 V @ 1.00 A 10.0 V @ 2.00 A 10.0 V @ 3.00 A 10.0 V @ 5.60 A 15/8 11/8 15/8 13/8 13/8 17/8 5 21/4 1 /8 19/16 25/8 113/16 3 1 5/16 1 5/16 1 9/16 1 7/8 2 3/16 2 1/2 0.200 0.200 0.200 0.400 0.550 0.600 0.250 0.400 0.400 0.400 0.275 0.300 1.000 1.000 1.140 1.460 1.680 1.900 11/ 16 11/ 16 11/ 4 11/ 2 N N N N N N 13/4 2 N N N N 23/16 21/2 8.03 8.64 9.68 11.78 13.54 16.56 VPP24-100 VPP24-210 VPP24-420a VPP24-830a VPP24-1250 VPP24-2330 2.5 5.0 10.0 20.0 30.0 56.0 24.0 V C.T. @ 0.10 A 24.0 V C.T. @ 0.21 A 24.0 V C.T. @ 0.42 A 24.0 V C.T. @ 0.83 A 24.0 V C.T. @ 1.25 A 24.0 V C.T. @ 2.33 A 12.0 V @ 0.20 A 12.0 V @ 0.42 A 12.0 V @ 0.84 A 12.0 V @ 1.66 A 12.0 V @ 2.50 A 12.0 V @ 4.66 A 11/8 15/8 15/8 13/8 13/8 17/8 21/4 15/8 9 1 /16 25/8 113/16 3 1 5/16 1 5/16 1 9/16 1 7/8 2 3/16 2 1/2 0.200 0.200 0.200 0.400 0.550 0.600 0.250 0.400 0.400 0.400 0.275 0.300 1.000 1.000 1.140 1.460 1.680 1.900 11/ 16 11/ 16 11/ 4 11/ 2 N N N N N N 13/4 2 N N N N 23/16 21/2 8.03 8.64 9.68 11.78 13.54 16.56 967-8068 967-8069 967-8070 967-8071 967-8072 967-8073 VPP28-090 VPP28-180 VPP28-360a VPP28-720a VPP28-1060 VPP28-2000 2.5 5.0 10.0 20.0 30.0 56.0 28.0 V C.T. @ 0.09 A 28.0 V C.T. @ 0.18 A 28.0 V C.T. @ 0.36 A 28.0 V C.T. @ 0.72 A 28.0 V C.T. @ 1.06 A 28.0 V C.T. @ 2.00 A 14.0 V @ 0.18 A 14.0 V @ 0.36 A 14.0 V @ 0.72 A 14.0 V @ 1.44 A 14.0 V @ 2.12 A 14.0 V @ 4.00 A 15/8 11/8 13/8 15/8 3 17/8 1 /8 15/8 21/4 19/16 25/8 113/16 3 1 5/16 1 5/16 1 9/16 1 7/8 2 3/16 2 1/2 0.200 0.200 0.200 0.400 0.550 0.600 0.250 0.400 0.400 0.400 0.275 0.300 1.000 1.000 1.140 1.460 1.680 1.900 11/ 16 11/ 16 11/ 4 11/ 2 N N N N N N 13/4 2 N N N N 23/16 21/2 8.03 8.64 9.68 11.78 13.54 16.88 967-8074 967-8075 967-8076 967-8077 967-8078 967-8079 VPP36-070 VPP36-140 VPP36-280a VPP36-560a VPP36-820 VPP36-1560 2.5 5.0 10.0 20.0 30.0 56.0 36.0 V C.T. @ 0.07 A 36.0 V C.T. @ 0.14 A 36.0 V C.T. @ 0.28 A 36.0 V C.T. @ 0.56 A 36.0 V C.T. @ 0.82 A 36.0 V C.T. @ 1.56 A 18.0 V @ 0.14 A 18.0 V @ 0.28 A 18.0 V @ 0.56 A 18.0 V @ 1.12 A 18.0 V @ 1.64 A 18.0 V @ 3.12 A 15/8 11/8 15/8 13/8 13/8 17/8 5 21/4 1 /8 19/16 25/8 113/16 3 1 5/16 1 5/16 1 9/16 1 7/8 2 3/16 2 1/2 0.200 0.200 0.200 0.400 0.550 0.600 0.250 0.400 0.400 0.400 0.275 0.300 1.000 1.000 1.140 1.460 1.680 1.900 11/ 16 11/ 16 11/ 4 11/ 2 N N N N N N 13/4 2 N N N N 23/16 21/2 8.03 8.64 9.68 11.78 13.54 16.56 *CT N WIth a center tap. 0.025 square pin spacing. a0.036 square pin spacing. 0.045 square pin spacing. Prices Subject To Change N We Always Ship At The Lowest Price In Effect ALLIED c 1039 17