Illumination LUXEON Rebel Color Line High flux and efficacy on industry's most widely used color LED platform The LUXEON Rebel Color Line has leading light output, color stability, flux density and clear saturated colors. These color LEDs are ideal for a wide variety of lighting, signaling, signage and entertainment applications. Every LUXEON Rebel Color emitter has built-in quality, reliability, lumen maintenance and the ease of manufacturing needed to create a superior, high quality light. LUXEON Rebel Color emitters give designers an endless palette of colors to work with, adding interest, dimension and liveliness to all lighting projects. Features and Benefits Primary Applications Full color palette for a wider spectrum range Architectural Highest efficacy available for colors, allowing for lower power consumption Lamps High flux and leading hot and cold performance for saturated colors Specialty Lighting Fully developed ecosystem for LUXEON Rebel platforms -- Emergency Lighting -- Entertainment DS68 LUXEON Rebel Color Line Product Datasheet (c)2017 Lumileds Holding B.V. All rights reserved. No. E352519 Table of Contents General Product Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Product Test Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Part Number Nomenclature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Lumen Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Environmental Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Performance Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Product Selection Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Electrical and Thermal Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Absolute Maximum Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Characteristic Curves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Spectral Power Distribution Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Light Output Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Forward Current Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Radiation Pattern Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Product Bin and Labeling Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Decoding Product Bin Labeling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Luminous Flux Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Radiometric Power Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Dominant and Peak Wavelength Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Color Bin Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Forward Voltage Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Mechanical Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Reflow Soldering Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 JEDEC Moisture Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Solder Pad Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Packaging Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Pocket Tape Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Reel Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 DS68 LUXEON Rebel Color Line Product Datasheet 20171106 (c)2017 Lumileds Holding B.V. All rights reserved. i General Product Information Product Test Conditions LUXEON Rebel Color Line LEDs are tested and binned with a DC drive current and junction temperature specified below: LUXEON Rebel Lime - 350mA, Tj=85C LUXEON Rebel ES Blue and LUXEON Rebel ES Royal Blue - 700mA, Tj=25C All other colors - 350mA, Tj=25C Part Number Nomenclature Part numbers for LUXEON Rebel Color Line follow the convention below: L X M L - P A 0 B - C C C C L X M 2 - P A 0 B - C C C C L X M 3 - P A 0 B - C C C C L X M 5 - P A 0 B Where: A - designates color (X=Lime, M=Green, E=Cyan, B=Blue, R=Royal Blue, F=Far Red, D=Deep Red and Red, H=Red-Orange, L=PC Amber and Amber, B=Blue, R=Royal Blue ) B - designates diode size (1=1mm2 and 2=2mm2) C C C C - designates minimum luminous flux (lm) or radiometric power (mW) performance (see Product Selection Guide) Therefore, the following part number is used for a LUXEON Rebel Red, 1mm2 diode size, with a minimum luminous flux of 50: L X M 2 - P D 0 1 - 0 0 5 0 Lumen Maintenance Please contact your local Sales Representative or Lumileds Technical Solutions Manager for more information about the longterm performance of this product. Environmental Compliance Lumileds LLC is committed to providing environmentally friendly products to the solid-state lighting market. LUXEON Rebel Color Line is compliant to the European Union directives on the restriction of hazardous substances in electronic equipment, namely the RoHS Directive 2011/65/EU and REACH Regulation (EC) 1907/2006. Lumileds LLC will not intentionally add the following restricted materials to its products: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) or polybrominated diphenyl ethers (PBDE). DS68 LUXEON Rebel Color Line Product Datasheet 20171106 (c)2017 Lumileds Holding B.V. All rights reserved. 2 Performance Characteristics Product Selection Guide Table 1. Product performance of LUXEON Rebel Color Line at test conditions. Color DOMINANT [1, 2] or PEAK WAVELENGTH [2] (nm) LUMINIOUS FLUX [1, 3] (lm) or RADIOMETRIC POWER [3] (mW) Part Number Minimum Maximum Minimum Far Red 720 750 210 260 350 LXML-PF01 Deep Red 650 670 270 360 350 LXM3-PD01 620 645 60 62 350 LXM2-PD01-0060 620 645 50 53 350 LXM2-PD01-0050 620 645 40 48 350 LXM2-PD01-0040 620 645 50 52 350 LXML-PD01-0050 620 645 40 46 350 LXML-PD01-0040 620 645 30 38 350 LXML-PD01-0030 620 645 50 64 350 LXM5-PD01 610 620 70 72 350 LXM2-PH01-0070 610 620 60 67 350 LXM2-PH01-0060 610 620 60 62 350 LXML-PH01-0060 610 620 50 56 350 LXML-PH01-0050 610 620 50 90 350 LXM5-PH01 594 604 80 110 350 LXM2-PL01-0000 585 595 60 61 350 LXML-PL01-0060 585 595 50 54 350 LXML-PL01-0050 585 595 40 48 350 LXML-PL01-0040 585 595 30 38 350 LXML-PL01-0030 Red Red-Orange PC Amber Amber Lime Green Cyan Blue Royal Blue Typical Test Current (mA) 585 595 50 74 350 LXM5-PL01 566 569 140 184 350 LXML-PX02-0000 520 540 100 102 350 LXML-PM01-0100 520 540 90 95 350 LXML-PM01-0090 520 540 80 88 350 LXML-PM01-0080 520 540 70 79 350 LXML-PM01-0070 490 515 80 83 350 LXML-PE01-0080 490 515 70 76 350 LXML-PE01-0070 490 515 60 67 350 LXML-PE01-0060 460 485 40 41 350 LXML-PB01-0040 460 485 30 35 350 LXML-PB01-0030 460 485 23 28 350 LXML-PB01-0023 460 485 18 22 350 LXML-PB01-0018 460 485 50 74 700 LXML-PB02 440 460 500 520 350 LXML-PR01-0500 440 460 1100 1120 700 LXML-PR02-1100 440 460 1050 1070 700 LXML-PR02-1050 440 460 1000 1030 700 LXML-PR02-1000 440 460 950 970 700 LXML-PR02-0950 440 460 900 940 700 LXML-PR02-0900 440 460 800 890 700 LXML-PR02-0800 440 460 900 1030 700 LXML-PR02-A900 [4] Notes for Table 1: 1. Lumileds maintains a tolerance of 0.5nm for dominant wavelength and 6.5% on luminous flux measurements.. 2. Far Red, Deep Red and Royal Blue are binned by peak wavelength and all other colors by dominant wavelength. 3. Far Red, Deep Red and Royal Blue are binned by radiometric power and all other colors by luminous flux. 4. LXML-PR02-A900 is a selection of color bins 4 and 5 only. DS68 LUXEON Rebel Color Line Product Datasheet 20171106 (c)2017 Lumileds Holding B.V. All rights reserved. 3 Table 2. Optical characteristics for LUXEON Rebel Color Line at test conditions. TYPICAL TEMPERATURE COEFFICIENT OF DOMINANT or PEAK WAVELENGTH (nm/C) Typical Total Included Angle [2] Typical Viewing Angle [3] COLOR Part Number TYPICAL SPECTRAL HALF-WIDTH [1] (nm) Far Red LXML-PF01 [4] 30 0.17 145 125 Deep Red LXM3-PD01 [4] 20 0.05 145 125 LXM2-PD01 [4, 6] 20 0.05 145 125 LXML-PD01 [4, 6] 20 0.05 145 125 LXM5-PD01 [4, 6] 20 0.05 145 125 LXM2-PH01 [4, 6] 20 0.08 145 125 LXML-PH01 [4, 6] 20 0.08 145 125 LXM5-PH01 [4, 6] 20 0.08 145 125 Red Red-Orange 80 -0.01 140 120 LXML-PL01 [4, 6] 20 0.10 145 125 LXM5-PL01 [4, 6] 20 0.10 145 125 Lime LXML-PX02 [5] 100 0.01 145 125 Green LXML-PM01 [5] 30 0.05 145 125 Cyan LXML-PE01 [5] 30 0.04 145 125 LXML-PB01 [5] 20 0.05 145 125 LXML-PB02 [5] 20 0.05 145 125 LXML-PR01 [5] 20 0.04 145 125 LXML-PR02 [5] 20 0.04 145 125 PC Amber Amber Blue Royal Blue LXM2-PL01 [5] Notes for Table 2: 1. Spectral width at 1/2 of the peak intensity. 2. Total angle at which 90% of total luminous flux is captured. 3. Viewing angle is the off axis angle from the LED centerline where the luminous intensity is 1/2 of the peak value. 4. Far Red, Deep Red, Red, Red-Orange and Amber products are built with aluminum indium gallium phosphide (AlInGaP). 5. PC Amber, Lime, Green, Cyan, Blue and Royal Blue products are built with Indium Gallium Nitride (InGaN). 6. Wavelength ranges for hot tested Red, Red-Orange and Amber have been defined to align with typical changes in spectral output at increased temperature. Electrical and Thermal Characteristics Table 3. Electrical and thermal characteristics for LUXEON Rebel Color Line at test conditions. COLOR Part Number Forward Voltage [1] (Vf) Minimum Typical MAXIMUM Typical Temperature Coefficient of Forward Voltage [2] (mV/C) Typical Thermal Resistance--Junction to Solder Pad (C/W) Far Red LXML-PF01 1.60 1.80 2.40 -2.0 to -4.0 5.50 Deep Red LXM3-PD01 1.80 2.10 2.80 -2.0 to -4.0 8.00 LXM2-PD01 1.80 2.10 2.80 -2.0 to -4.0 8.00 Red Red-Orange PC Amber LXML-PD01 2.31 2.90 3.51 -2.0 to -4.0 12.00 LXM5-PD01 1.80 2.10 2.60 -2.0 to -4.0 7.00 LXM2-PH01 1.80 2.10 2.80 -2.0 to -4.0 8.00 LXML-PH01 2.31 2.90 3.51 -2.0 to -4.0 12.00 LXM5-PH01 1.80 2.10 2.60 -2.0 to -4.0 7.00 LXM2-PL01 2.55 3.05 3.51 -2.0 to -4.0 10.00 LXML-PL01 2.31 2.90 3.51 -2.0 to -4.0 12.00 LXM5-PL01 1.80 2.10 2.60 -2.0 to -4.0 7.00 Lime LXML-PX02 2.60 2.75 3.00 -2.0 to -4.0 6.00 Green LXML-PM01 2.55 3.21 3.51 -2.0 to -4.0 10.00 Amber Cyan Blue Royal Blue LXML-PE01 2.55 3.17 3.51 -2.0 to -4.0 10.00 LXML-PB01 2.55 2.95 3.51 -2.0 to -4.0 10.00 LXML-PB02 2.50 2.95 3.50 -2.0 to -4.0 6.00 LXML-PR01 2.55 2.95 3.51 -2.0 to -4.0 10.00 LXML-PR02 2.50 2.90 3.50 -2.0 to -4.0 6.00 Notes for Table 3: 1. Lumileds maintains a tolerance of 0.06V on forward voltage measurements. 2. Measured between 25C and 110C. DS68 LUXEON Rebel Color Line Product Datasheet 20171106 (c)2017 Lumileds Holding B.V. All rights reserved. 4 Absolute Maximum Ratings Table 4a. Absolute maximum ratings for LUXEON Rebel Color Line at Tj=25C. Parameter GREEN/CYAN/ BLUE/ROYAL BLUE ES BLUE/ ES ROYAL BLUE FAR RED/ DEEP RED/RED/ RED-ORANGE/AMBER PC AMBER 1000mA 1000 700mA 700mA 1000mA 1200 700mA 700mA 150C 150C 135C 130C DC Forward Current [1, 2] Peak Pulsed Forward Current [1, 3] LED Junction Temperature [1] (DC & Pulse) ESD Sensitivity (ANSI/ESDA/JEDEC JS-001-2012) Class 3A Class 3A Class 3A Class 3A Operating Case Temperature [1] -40C to 135C -40C to 135C -40C to 120C -40C to 110C LED Storage Temperature -40C to 135C -40C to 135C -40C to 135C -40C to 135C Soldering Temperature JEDEC 020c 260C JEDEC 020c 260C JEDEC 020c 260C JEDEC 020c 260C Allowable Reflow Cycles 3 3 3 3 Autoclave Conditions -121C at 2 ATM 100% Relative Humidity for 96 Hours Maximum Reverse Voltage (Vreverse) LUXEON LEDs are not designed to be driven in reverse bias Notes for Table 4a: 1. Proper current derating must be observed to maintain the junction temperature below the maximum. 2. Residual periodic variations due to power conversion from alternating current (AC) to direct current (DC), also called "ripple," with frequencies 100Hz and amplitude 15% of the maximum allowable DC forward current are acceptable, assuming the average current throughout each cycle does not exceed the maximum allowable DC forward current at the corresponding maximum junction temperature. 3. Pulsed operation with a peak drive current equal to the stated peak pulsed forward current is acceptable if the pulse on-time is 5ms per cycle and the duty cycle is 50%. Table 4b. Absolute maximum ratings for LUXEON Rebel Color Line at Tj=85C. Parameter LIME 1000 DC Forward Current [1, 2] Peak Pulsed Forward Current 1200 [1, 3] LED Junction Temperature [1] (DC & Pulse) 150C ESD Sensitivity (ANSI/ESDA/JEDEC JS-001-2012) Class 3A Operating Case Temperature -40C to 135C [1] LED Storage Temperature -40C to 135C Soldering Temperature JEDEC 020c 260C Allowable Reflow Cycles 3 Autoclave Conditions 100% Relative Humidity for 96 Hours Maximum Reverse Voltage (Vreverse) LUXEON LEDs are not designed to be driven in reverse bias Notes for Table 4b: 1. Proper current derating must be observed to maintain the junction temperature below the maximum. 2. Residual periodic variations due to power conversion from alternating current (AC) to direct current (DC), also called "ripple," with frequencies 100Hz and amplitude 15% of the maximum allowable DC forward current are acceptable, assuming the average current throughout each cycle does not exceed the maximum allowable DC forward current at the corresponding maximum junction temperature. 3. Pulsed operation with a peak drive current equal to the stated peak pulsed forward current is acceptable if the pulse on-time is 5ms per cycle and the duty cycle is 50%. DS68 LUXEON Rebel Color Line Product Datasheet 20171106 (c)2017 Lumileds Holding B.V. All rights reserved. 5 Characteristic Curves Spectral Power Distribution Characteristics Figure 1a. Typical normalized power vs. wavelength for LUXEON Rebel Far Red, Deep Red, Red, Red-Orange, PC Amber, Amber, Green, Cyan, Blue and Royal Blue at test current, Tj=25C. Figure 1b. Typical normalized power vs. wavelength for LUXEON Rebel PC Amber and Lime at 350mA, test temperature. DS68 LUXEON Rebel Color Line Product Datasheet 20171106 (c)2017 Lumileds Holding B.V. All rights reserved. 6 Light Output Characteristics 1.2 Relativ ve Luminous/Radiant Flux 1.1 1.0 0.9 0.8 LUXEON Rebel ES Blue (LXML-PB02) & Blue (LXML-PB01) Photometric 0.7 Green (LXML-PM01) & Cyan (LXMLPE01) Photometric LUXEON Rebel ES Royal-Blue (LXMLPR02) & Royal-Blue (LXML-PR01) Radiometric 0.6 0.5 -20 0 20 40 60 80 100 120 140 Thermal Pad Temperature (C) Figure 2a. Typical normalized light output vs. junction temperature for LXML-PM01, LXML-PE01, LXML-PB01, LXML-PB02, LXML-PR01 and LXML-PR02 at test current. 1.75 Red (LXML-PD01 & LXM2-PD01) Red-Orange (LXML-PH01 & LXM2-PH01) Relative Luminous Flux Output 1.50 Amber (LXML-PL01) PC Amber (LXM2-PL01) Far Red (LXML-PF01) 1.25 Deep Red (LXM3-PD01 1.00 0.75 0.50 0.25 0.00 -20 0 20 40 60 80 100 Thermal Pad Temperature (C) Figure 2b. Typical normalized light output vs. junction temperature for LXML-PF01, LXM3-PD01, LXM2-PD01, LXML-PD01, LXM2-PH01, LXML-PH01, LXM2-PL01, LXML-PL01 at test current. DS68 LUXEON Rebel Color Line Product Datasheet 20171106 (c)2017 Lumileds Holding B.V. All rights reserved. 7 1.75 Relative Luminous Flux Output 1.50 Far Red (LXML-PF01) 1.25 1.00 0.75 0.50 0.25 0.00 0 20 40 60 80 100 120 140 Junction Temperature (C) Figure 2c. Typical normalized light output vs. junction temperature for LXML-PF01 at test current. 1.2 Red (LXM5-PD01) Red Orange (LXM5-PH01) 1 Relative Luminous Flux Amber (LXM5-PL01) 0.8 0.6 0.4 0.2 0 0 20 40 60 80 100 120 140 Junction Temperature (C) Figure 2d. Typical normalized light output vs. junction temperature for LXM5-PD01, LXM5-PH01 and LXM5-PL01 at test current. DS68 LUXEON Rebel Color Line Product Datasheet 20171106 (c)2017 Lumileds Holding B.V. All rights reserved. 8 1.2 Lime (LXML-PX02) Relative Luminous Flux 1.1 1.0 0.9 0.8 0.7 25 50 75 100 125 150 Thermal Pad Temperature (C) Figure 2e. Typical normalized light output vs. junction temperature for LXML-PX02 at test current. Forward Current Characteristics 1000 ES Royal Blue and ES Blue (LXMLPx02) Forward Current (mA) 800 Green, Cyan, Blue and Royal Blue (LXML-Px01) 600 Lime (LXML-PX02) 400 200 0 2.3 2.5 2.7 2.9 3.1 3.3 Forward Voltage (V) Figure 3a. Typical forward current vs. forward voltage for LXML-PX02, LXML-Px01 and LXML-Px02 at test temperature. DS68 LUXEON Rebel Color Line Product Datasheet 20171106 (c)2017 Lumileds Holding B.V. All rights reserved. 9 1000 Red (LXM5-PD01), Red-Orange (LXM5-PH01) & Amber (LXM5-PL01) Red (LXML2-PD01) & Red Orange (LXM2-PH01) 900 Red (LXML-PD01), Red-Orange (LXML-PH01) & Amber (LXML-PL01) PC Amber (LXM2-PL01) 800 Far Red (LXML-PF01) Forward Current (mA) Deep Red (LXM3-PD01) 700 600 500 400 300 200 100 0 1.6 2.1 2.6 3.1 3.6 Forward Voltage (V) Figure 3b. Typical forward current vs. forward voltage for LXML-PF01, LXM3-PD01, LXM2-PD01, LXM5-PD01, LXML-PD01, LXM2-PH01, LXM5-PH01, LXML-PH01, LXM2-PL01, LXM5-PL01 and LXML-PL01 at test temperature. 2 1.8 Relative Radiant Flux 1.6 1.4 1.2 1 0.8 LUXEON Rebel ES Royal Blue (LXML-PR02) and ES Blue (LXML-PB02) 0.6 04 0.4 0.2 0 0 200 400 600 800 1000 1200 1400 1600 Forward Current (mA) Figure 3c. Relative luminous flux or radiometric power vs. forward current for LXML-PB02 and LXML-PR02 at test temperature. DS68 LUXEON Rebel Color Line Product Datasheet 20171106 (c)2017 Lumileds Holding B.V. All rights reserved. 10 2.7 2.4 Relative Luminous Flux 2.1 1.8 1.5 1.2 Blue (LXML-PB01) 0.9 Royal Blue (LXML-PR01) 0.6 Green (LXML-PM01) Lime (LXML-PX02) 0.3 0.0 0 200 400 600 800 1000 Forward Current (mA) Figure 3d. Relative luminous flux vs. forward current for LXML-PX02, LXML-PM01, LXML-PB01 and LXML-PR01 at test temperature. 2.00 Normalized Luminous Flux 1.75 1.50 1.25 1.00 0.75 Red (LXM2-PD01) & Red-Orange (LXM2-PH01) 0.50 Red (LXML-PD01), Red-Orange (LXML-PH01) & Amber (LXML-PL01) Far Red (LXML-PF01) 0.25 Deep Red (LXM3-PD01) 0.00 0 100 200 300 400 500 600 700 800 Forward Current (mA) Figure 3e. Normalized luminous flux or radiometric power vs. forward current for LXML-PF01, LXM3-PD01, LXM2-PD01, LXM5-PD01, LXML-PD01, LXM2-PH01, LXM5-PH01, LXML-PH01, LXM5-PL01 and LXML-PL01 at test temperature. DS68 LUXEON Rebel Color Line Product Datasheet 20171106 (c)2017 Lumileds Holding B.V. All rights reserved. 11 2.00 1.75 Relatiive Luminious Flux 1.50 1.25 1.00 0.75 0.50 PC Amber (LXM2-PL01) 0.25 0.00 0 00 0 100 200 300 400 500 600 700 Forward Current (mA) Figure 3f. Relative luminous flux vs. forward current for LXM2-PL01 at test temperature. DS68 LUXEON Rebel Color Line Product Datasheet 20171106 (c)2017 Lumileds Holding B.V. All rights reserved. 12 Radiation Pattern Characteristics 100% 90% 80% Relative Inten nsity % 70% 60% 50% LUXEON Rebel ES Royal Blue (LXML-PR02) and ES Blue (LXML-PB02) 40% 30% green LXML-PM01, cyan LXML-PE01, blue LXML-PB01 & royal blue LXML-PR01 20% 10% 0% -90 -75 -60 -45 -30 -15 0 15 30 45 60 75 90 Angular Displacement (deg) Figure 4a. Typical radiation pattern for LXML-PM01, LXML-PE01, LXML-PB01, LXML-PB02, LXML-PR01 and LXML-PR02 at test conditions. 0 -30 30 60 -60 -1.0 -0.8 -0.6 -0.4 -0.2 0.0 0.2 0.4 0.6 0.8 1.0 LUXEON Rebel ES Royal Blue LXML-PR02 and ES Blue LXML-PB02 green LXML-PM01, cyan LXML-PE01, blue LXML-PB01 & royal blue LXML-PR01 Figure 5a. Typical polar radiation pattern for LXML-PM01, LXML-PE01, LXML-PB01, LXML-PB02, LXML-PR01 and LXML-PR02 at test conditions. DS68 LUXEON Rebel Color Line Product Datasheet 20171106 (c)2017 Lumileds Holding B.V. All rights reserved. 13 100% 90% 80% Relative R Intensity % 70% 60% 50% 40% 30% Red (LXM2-PD01, LXM5-PD01), Red-Orange (LXM2-PH01, LXM5-PH01) & Amber (LXM5-PL01) 20% red LXML-PD01, red-orange LXML-PH01 & amber LXML-PL01 10% 0% -90 -75 -60 -45 -30 -15 0 15 30 45 60 75 90 Angular Displacement deg Figure 4b. Typical radiation pattern for LXM2-PD01, LXM5-PD01, LXML-PD01, LXM2-PH01, LXM5-PH01, LXML-PH01, LXM5-PL01 and LXML-PL01 at test conditions. 0 30 30 60 60 1.0 0.8 0.6 0.4 0.2 0.0 0.2 0.4 0.6 0.8 1.0 red LXM2PD01 & redorange LXM2PH01 red LXMLPD01, redorange LXMLPH01 & amber LXMLPL01 Figure 5b. Typical polar radiation pattern for LXM2-PD01, LXML-PD01, LXM2-PH01, LXML-PH01 and LXML-PL01 at test conditions. DS68 LUXEON Rebel Color Line Product Datasheet 20171106 (c)2017 Lumileds Holding B.V. All rights reserved. 14 Far Red (LXML-PF01) 100% 90% 80% Relative Intensity % 70% 60% 50% 40% Far Red (LXML-PF01) 30% 20% 10% 0% -90 -75 -60 -45 -30 -15 0 15 30 45 60 75 90 Angular Displacement deg Figure 4c. Typical radiation pattern for LXML-PF01 at test conditions. 0 -30 30 60 -60 -1.0 -0.8 -0.6 -0.4 -0.2 0.0 0.2 0.4 0.6 0.8 1.0 Far Red (LXML-PF01) Figure 5c. Typical polar radiation pattern for LXML-PF01 at test conditions. DS68 LUXEON Rebel Color Line Product Datasheet 20171106 (c)2017 Lumileds Holding B.V. All rights reserved. 15 120% Relative In ntensity (% %) 100% 80% 60% 40% 20% Deep Red (LXM3-PD01) 0% -90 -60 -30 0 30 60 90 Angular Displacement (deg) Figure 4d. Typical radiation pattern for LXM3-PD01 at test conditions. 0 100 30 -30 80 60 -60 60 60 60 40 20 -90 90 0 Deep Red (LXM3-PD01) -120 -150 -150 120 150 150 180 Figure 5d. Typical polar radiation pattern for LXM3-PD01 at test conditions. DS68 LUXEON Rebel Color Line Product Datasheet 20171106 (c)2017 Lumileds Holding B.V. All rights reserved. 16 1.2 1.0 Relative lative Intensity 0.8 0.6 0.4 0.2 0.0 -100 -80 -60 -40 -20 0 20 40 60 80 100 Angular Displacement (degrees) Figure 4e. Typical radiation pattern for LXM2-PL01 at test conditions. Figure 5e. Typical polar radiation pattern for LXM2-PL01 at test conditions. DS68 LUXEON Rebel Color Line Product Datasheet 20171106 (c)2017 Lumileds Holding B.V. All rights reserved. 17 Product Bin and Labeling Definitions Decoding Product Bin Labeling In the manufacturing of semiconductor products, there are variations in performance around the average values given in the technical datasheet. For this reason, Lumileds bins LED components for luminous flux or radiometric power, color point, peak or dominant wavelength and forward voltage. Reels of LUXEON Rebel Far Red, Deep Red, Red, Red-Orange, PC Amber, Amber, Green, Cyan, Blue and Royal Blue are labeled using a 3-digit alphanumeric CAT code following the format below: A B C Where: A - designates luminous flux or radiometric power bin (example: Deep Red D=300 to 350 lumens, Green K=70 to 80 lumens) B - designates peak or dominant wavelength bin (example: Green 2=525 to 530nm, Cyan 2=495 to 500nm) C - designates forward voltage bin (example: Far Red U=1.60 to 1.80V, Green B=2.55 to 2.79V) Therefore, LUXEON Rebel Green with a lumen range of 70 to 80, a dominant wavelength of 525 to 530nm and a forward voltage range of 2.55 to 2.79V has the following CAT code: K 2 B Reels of LUXEON Rebel Lime are labeled using a 4-digit alphanumeric CAT code following the format below: A B C D Where: A - designates luminous flux bin (example: F=150 to 160 lumens, J=180 to 190 lumens, M=210 to 220 lumens) B C - designates color bin (example: A0) D designates forward voltage bin (example: P=2.60 to 2.75V, R=2.75 to 3.00V) - Therefore, LUXEON Rebel Lime with a lumen range of 180 to 190, color bin A0 and a forward voltage range of 2.75 to 3.00V has the following CAT code: J A 0 R DS68 LUXEON Rebel Color Line Product Datasheet 20171106 (c)2017 Lumileds Holding B.V. All rights reserved. 18 Luminous Flux Bins Tables 5a and 5b list the standard luminous flux bins for LUXEON Rebel Color Line emitters. Although several bins are outlined, product availability in a particular bin varies by production run and by product performance. Not all bins are available in all CCTs. Table 5a. Luminous flux bin definitions for LUXEON Rebel Red, Red-Orange, PC Amber, Amber, Green, Cyan and Blue. Bin Luminous Flux [1] (lm) Minimum Maximum D 18 24 E 24 30 F 30 40 G 40 50 H 50 60 J 60 70 K 70 80 L 80 90 M 90 100 N 100 110 X 110 120 P 120 130 Y 130 140 Q 140 160 R 160 180 S 180 200 Notes for Table 5a: 1. Lumileds maintains a tolerance of 6.5% on luminous flux measurements. 2. Tested and binned at test conditions. Table 5b. Luminous flux bin definitions for LUXEON Rebel Lime. Bin Luminous Flux [1] (lm) Minimum Maximum E 140 150 F 150 160 G 160 170 H 170 180 J 180 190 K 190 200 L 200 210 M 210 220 Notes for Table 5b: 1. Lumileds maintains a tolerance of 6.5% on luminous flux measurements. 2. Tested and binned at test conditions. DS68 LUXEON Rebel Color Line Product Datasheet 20171106 (c)2017 Lumileds Holding B.V. All rights reserved. 19 Radiometric Power Bins Table 6a. Radiometric power bin definitions for LUXEON Rebel Royal Blue. Bin Radiometric Power [1] (mW) Minimum Maximum D 350 425 E 425 500 F 500 600 G 600 700 H 700 800 J 800 900 K 900 950 Y 950 1000 A 1000 1050 B 1050 1100 M 1100 1200 N 1200 1300 P 1300 1400 Notes for Table 6a: 1. Lumileds maintains a tolerance of 6.5% for radiometric power measurements. 2. Tested and binned at test conditions. Table 6b. Radiometric power bin definitions for LUXEON Rebel Far Red and Deep Red. Bin Radiometric Power [1] (mW) Minimum Maximum B 210 260 C 260 300 D 300 350 E 350 400 Notes for Table 6b: 1. Lumileds maintains a tolerance of 6.5% for radiometric power measurements. 2. Tested and binned at test conditions. DS68 LUXEON Rebel Color Line Product Datasheet 20171106 (c)2017 Lumileds Holding B.V. All rights reserved. 20 Dominant and Peak Wavelength Bins Table 7a. Dominant wavelength bin definitions for LUXEON Rebel Red, Red-Orange, Amber, Green, Cyan and Blue. dominant Wavelength [1] (nm) COLOR PART NUMBER Bin Red LXM2-PD01, LXM5-PD01 and LXML-PD01 4 620 630 5 630 645 Red-Orange LXM2-PH01, LXM5-PH01 and LXML-PH01 2 610 620 1 585 587 2 587 590 4 590 592 6 592 595 1 520 525 2 525 530 3 530 535 Amber Green Cyan Blue LXM5-PL01 and LXML-PL01 LXML-PM01 LXML-PE01 LXML-PB01 and LXML-PB02 Minimum Maximum 4 535 540 1 490 495 2 495 500 3 500 505 4 505 510 5 510 515 1 460 465 2 465 470 3 470 475 4 475 480 5 480 485 Notes for Table 7a: 1. Lumileds maintains a tolerane of 0.5nm for dominant wavelength measurements. Table 7b. Peak wavelength bin definitions for LUXEON Rebel Far Red, Deep Red and Royal Blue. COLOR Far Red Deep Red Royal Blue PART NUMBER LXML-PF01 LXM3-PD01 LXML-PR01 and LXML-PR02 Bin PEAK Wavelength [1] (nm) Minimum Maximum 1 720 730 2 730 740 3 740 750 6 650 660 7 660 670 3 440 445 4 445 450 5 450 455 6 455 460 Notes for Table 7b: 1. Lumileds maintains a tolerane of 2nm for peak wavelength measurements. DS68 LUXEON Rebel Color Line Product Datasheet 20171106 (c)2017 Lumileds Holding B.V. All rights reserved. 21 Color Bin Definitions 0.6 ES Lime 0.55 y PC Amber 0.5 0.45 0.4 0.36 0.41 0.46 0.51 0.56 0.61 x Figure 6. Color bin structure for LUXEON Rebel PC Amber and Lime for Table 8. Table 8. Peak wavelength bin definitions for LUXEON Rebel PC Amber and Lime. COLOR PC Amber Lime PART NUMBER LXM2-PL01 LXML-PX02 BIN 2 A0 x y 0.5622 0.4372 0.5576 0.4326 0.5775 0.4132 0.5843 0.4151 0.3819 0.5055 0.4191 0.5790 0.4327 0.5655 0.3972 0.4986 Notes for Table 8: 1. Lumileds maintains a tolerance of 0.005 on x and y coordinates in the CIE 1931 color space. DS68 LUXEON Rebel Color Line Product Datasheet 20171106 (c)2017 Lumileds Holding B.V. All rights reserved. 22 Forward Voltage Bins Table 9. Forward voltage bin definitions for LUXEON Rebel Color Line at test conditions. PART NUMBER Bin U Far Red - LXML-PF01 Deep Red - LXM3-PD01 Red - LXM2-PD01 Red - LXM5-PD01 Red-Orange - LXM2-PH01 Red-Orange - LXM5-PH01 Amber - LXM5-PL01 Lime - LXML-PX02 Red - LXML-PD01 Red-Orange - LXML-PH01 PC Amber - LXM2-PL01 Amber - LXML-PL01 Green - LXML-PM01 Cyan - LXML-PE01 Blue - LXML-PB01 Royal Blue - LXML-PR01 ES Blue - LXML-PB02 ES Royal Blue - LXML-PR02 FORWARD VOLTAGE [1] (Vf) Minimum Maximum 1.60 1.80 V 1.80 2.00 W 2.00 2.20 X 2.20 2.40 Y 2.40 2.60 Z 2.60 2.80 P 2.60 2.75 R 2.75 3.00 A 2.31 2.55 B 2.55 2.79 C 2.79 3.03 D 3.03 3.27 E 3.27 3.51 P 2.50 2.75 R 2.75 3.00 S 3.00 3.25 T 3.25 3.50 Notes for Table 9: 1. Lumileds maintains a tolerance of 0.06V on forward voltage measurements. DS68 LUXEON Rebel Color Line Product Datasheet 20171106 (c)2017 Lumileds Holding B.V. All rights reserved. 23 Mechanical Dimensions 3.17 2.93 2.10 1.85 1.67 1.38 0.11 0.05 4.61 4.37 0.68 0.52 1.67 1.38 2.61 2.49 R 0.14 0.06 1.26 1.14 0.46 0.34 0.73 0.61 1.86 1.74 1.83 1.71 2.86 2.74 Figure 7a. Mechanical dimensions for LUXEON Rebel Color Line. Notes for Figure 7a: 1. Drawings are not to scale. 2. All dimensions are in millimeters. DS68 LUXEON Rebel Color Line Product Datasheet 20171106 (c)2017 Lumileds Holding B.V. All rights reserved. 24 2.10 1.85 3.17 2.93 0.11 0.05 1.67 1.38 2.31 2.25 1.67 1.38 0.86 0.74 0.83 0.54 0.84 0.72 0.68 0.52 0.88 0.72 0.14 R 0.06 2.61 2.49 0.21 R 0.09 1.26 1.14 4.61 4.37 0.14 R 0.06 0.46 0.34 0.73 0.61 1.86 1.74 1.83 1.71 2.86 2.74 Figure 7b. Mechanical dimensions for LUXEON Rebel ES Blue and LUXEON Rebel ES Royal Blue. Notes for Figure 7b: 1. Drawings are not to scale. 2. All dimensions are in millimeters. DS68 LUXEON Rebel Color Line Product Datasheet 20171106 (c)2017 Lumileds Holding B.V. All rights reserved. 25 Reflow Soldering Guidelines tp Tp Critical Zone TL to Tp Ramp-up TL Temperature tL Tsmax Tsmin Ramp-down ts Preheat Area 25 Time 25C to Peak JEDEC J-STD-020D Time Figure 8. Visualization of the acceptable reflow temperature profile as specified in Table 10. Table 10. Reflow profile characteristics for LUXEON Rebel Color Line. PROFILE FEATURE Lead-Free Assembly Preheat Minimum Temperature (Tsmin) 150C Preheat Maximum Temperature (Tsmax) 200C Preheat Time (tsmin to tsmax) 60 to 180 seconds Ramp-Up Rate (TL to Tp) 3C / second maximum Liquidus Temperature (TL) 217C Time Maintained Above Temperature TL (tL) 60 to 150 seconds Peak / Classification Temperature (Tp) 260C Time Within 5C of Actual Temperature (tp) 20 to 40 seconds Ramp-Down Rate (Tp to TL) 6C / second maximum Time 25C to Peak Temperature 8 minutes maximum JEDEC Moisture Sensitivity Table 11. Moisture sensitivity levels for LUXEON Rebel Color Line. level 1 Floor Life Soak Requirements Standard TIme Conditions Time Conditions Unlimited 30C / 85% RH 168 Hours +5 / -0 85C / 85% RH DS68 LUXEON Rebel Color Line Product Datasheet 20171106 (c)2017 Lumileds Holding B.V. All rights reserved. 26 Solder Pad Design 3 1 3 2 TOP 2 1 BOTTOM PAD FUNCTION 1 CATHODE 2 ANODE 3 THERMAL Figure 9a. LUXEON Rebel Color Line pad configuration. Notes for Figure 9a: 1. The Thermal Pad is electrically isolated from the Anode and Cathode contact pads. 2. Drawings are not to scale. Figure 9b. LUXEON Rebel Color Line solder pad design. Notes for Figure 9b: 3. The photograph shows the recommended LUXEON Rebel Color Portfolio layout on printed circuit board (PCB). This design easily achieves a thermal resistance of 7K/W. 4. Drawings are not to scale. DS68 LUXEON Rebel Color Line Product Datasheet 20171106 (c)2017 Lumileds Holding B.V. All rights reserved. 27 Packaging Information Pocket Tape Dimensions 20 1000 50 Figure 10. Pocket tape dimensions for LUXEON Rebel Color Line. Notes for Figure 10: 1. Drawings are not to scale. 2. All dimensions are in millimeters. DS68 LUXEON Rebel Color Line Product Datasheet 20171106 (c)2017 Lumileds Holding B.V. All rights reserved. 28 Reel Dimensions Figure 11. Reel dimensions for LUXEON Rebel Color Line. Notes for Figure 11: 1. Drawings are not to scale. 2. All dimensions are in millimeters. DS68 LUXEON Rebel Color Line Product Datasheet 20171106 (c)2017 Lumileds Holding B.V. All rights reserved. 29 About Lumileds Companies developing automotive, mobile, IoT and illumination lighting applications need a partner who can collaborate with them to push the boundaries of light. With over 100 years of inventions and industry firsts, Lumileds is a global lighting solutions company that helps customers around the world deliver differentiated solutions to gain and maintain a competitive edge. As the inventor of Xenon technology, a pioneer in halogen lighting and the leader in high performance LEDs, Lumileds builds innovation, quality and reliability into its technology, products and every customer engagement. Together with its customers, Lumileds is making the world safer, better and more beautiful--with light. To learn more about our lighting solutions, visit lumileds.com. (c)2017 Lumileds Holding B.V. All rights reserved. LUXEON is a registered trademark of the Lumileds Holding B.V. in the United States and other countries. lumileds.com DS68 LUXEON Rebel Color Line Product Datasheet 20171106 Neither Lumileds Holding B.V. nor its affiliates shall be liable for any kind of loss of data or any other damages, direct, indirect or consequential, resulting from the use of the provided information and data. Although Lumileds Holding B.V. and/or its affiliates have attempted to provide the most accurate information and data, the materials and services information and data are provided "as is," and neither Lumileds Holding B.V. nor its affiliates warrants or guarantees the contents and correctness of the provided information and data. Lumileds Holding B.V. and its affiliates reserve the right to make changes without notice. You as user agree to this disclaimer and user agreement with the download or use of the provided materials, information and data. A listing of Lumileds product/patent coverage may be accessed at lumileds.com/patents.