MCC TM Micro Commercial Components SF51 THRU SF57 omponents 20736 Marilla Street Chatsworth !"# $ % !"# Features * * * * Lead Free Finish/RoHS Compliant(Note 1) ("P" Suffix designates RoHS Compliant. See ordering information) Low forward voltage, high current capability and Low leakage Superfast recovery times-epitaxial construction Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0 and MSL Rating 1 Maximum Ratings * * * 5.0 Amp Super Fast Rectifier 50 to 600 Volts Operating Junction Temperature: -55C to +150C Storage Temperature: -55C to +150C Maximum Thermal Resistance; 25 C/W Junction To Ambient MCC Part Number SF51 SF52 SF53 SF54 SF35 SF56 SF57 Maximum Recurrent Peak Reverse Voltage 50V 100V 150V 200V 300V 400V 600V Maximum RMS Voltage Maximum DC Blocking Voltage 35V 70V 105V 140V 210V 280V 420V 50V 100V 150V 200V 300V 400V 600V DO-201AD D A Cathode Mark Electrical Characteristics @ 25C Unless Otherwise Specified Average Forward Current Peak Forward Surge Current Maximum Instantaneous Forward Voltage SF51-SF54 SF55-SF56 SF57 Maximum DC Reverse Current At Rated DC Blocking Voltage Typical Junction Capacitance Maximum Reverse Recovery Time IF(AV) 5.0A TA = 55C IFSM 150A 8.3ms, half sine B D C VF 0.95V 1.25V 1.70V IFM = 5.0A; TA = 25C DIMENSIONS IR CJ TRR 5.0uA 150uA 45pF 35nS TA = 25C TA = 125C Measured at 1.0MHz, VR=4.0V DIM A B C D INCHES MIN .287 .189 .048 1.000 MAX .374 .208 .052 --- MM MIN 7.30 4.80 1.20 25.40 MAX 9.50 5.30 1.30 --- NOTE IF=0.5A, IR=1.0A, IRR=0.25A Notes:1.High Temperature Solder Exemption Applied, see EU Directive Annex 7. www.mccsemi.com Revision: 4 1 of 3 2008/01/01 MCC SF51 thru SF57 TM Micro Commercial Components AVERAGE FORWARD CURRENT (10)-AMP (10)-AAV trr +0.5A 0 -0.25 NOTE:1.Rise Time = 7ns max. Input Impedance = 1 megohm. 22pF 2.Rise Time = 10ns max. -1.0 SET TIME BASE FOR Source Impedance = 50 Ohms 1cm 8.0 6.0 ON HEAT SINK 4.0 2.0 ON PCB 0 50 Fig. 1-REVERSE RECOVERY TIME CHARACTERISTIC AND 4.0 3.0 2.0 1.0 0.1 SF57 0.01 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 200 150 125 75 8.3ms SINGLE HALF SINE WAVE JEDEC METHOD 35 50 100 Fig. 4-FORWARD CURRENT DERATING CURVE JUNCTION CAPACITANCE, pF PEAK FORWARD SURGE CURRENT, AMPERES SF55-56 1 INSTANTANEOUS FORWARD VOLTAGE, VOLTS Fig. 3-MAXIMUM AVERAGE FORWARD CCURRENT RATING 10 200 SF51-54 150 CASE TEMPERATURE 5 175 10 0 1 150 100 INSTANTANEOUS FORWARD CURRENT AMPERES AVERAGE FORWARD CURRENT, AMPERES 5.0 100 125 Fig. 2-MAXIMUM AVERAGE FORWARD CURRENT RATING TEST CIRCUIT DIAGRAM 50 100 AMBIENT TEMPERATURE 50 ns/cm 0 75 NUMBER OF CYCLES AT 60Hz 100 TJ = 25C f = 1.0MHz Vsig = 50mVp-p 10 5 1 10 100 REVERSE VOLTAGE, VOLTS Fig. 5-MAXIMUM NON-REPETITIVE SURGE CURRENT Fig. 6-TYPICAL JUNCTION CAPACITANCE www.mccsemi.com Revision: 4 2 of 3 2008/01/01 MCC TM Micro Commercial Components Ordering Information Device Packing (Part Number)-TP Tape&Reel; 1.2Kpcs/Reel (Part Number)-AP Ammo Packing;1.2Kpcs/AmmoBox (Part Number)-BP Bulk;500pcs/Box ***IMPORTANT NOTICE*** Micro Commercial Components Corp . reserves the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are represented on our website, harmless against all damages. ***APPLICATIONS DISCLAIMER*** Products offer by Micro Commercial Components Corp . are not intended for use in Medical, Aerospace or Military Applications. www.mccsemi.com Revision: 4 3 of 3 2008/01/01