PAA110 Dual Single-Pole, Normally Open OptoMOS(R) Relays INTEGRATED CIRCUITS DIVISION Parameters Load Voltage Load Current On-Resistance (max) Ratings 400 150 22 Units VP mArms / mADC Features * * * * * * * * * * 3750Vrms Input/Output Isolation Low Drive Power Requirements High Reliability Arc-Free With No Snubbing Circuits VDE Compatible FCC Compatible No EMI/RFI Generation Small 8-Pin Package Flammability Rating UL 94 V-0 Surface Mount and Tape Reel Version Available. Applications * Telecommunications * Telecom Switching * Tip/Ring Circuits * Modem Switching (Laptop, Notebook, Pocket Size) * Hook Switch * Dial Pulsing * Ground Start * Ringing Injection * Instrumentation * Multiplexers * Data Acquisition * Electronic Switching * I/O Subsystems * Meters (Watt-Hour, Water, Gas) * Medical Equipment-Patient/Equipment Isolation * Security * Aerospace * Industrial Controls Description PAA110 is a 400V, 150mA, 22 dual normally open (1-Form-A) optically isolated Solid State Relay. Its efficient MOSFET switches and photovoltaic die use IXYS Integrated Circuits' patented OptoMOS architecture to provide 3750Vrms of input to output isolation. The optically coupled output is controlled by a highly efficient infrared LED This performance leader provides high peak load voltage handling capability and improved peak load current handling. Approvals * UL Recognized Component: File E76270 * CSA Certified Component: Certificate 1175739 * EN/IEC 60950-1 Certified Component: Certificate available on our website Ordering Information Part # PAA110 PAA110P PAA110PTR PAA110S PAA110STR Description 8-Pin DIP (50/Tube) 8-Pin Flatpack (50/Tube) 8-Pin Flatpack (1000/Reel) 8-Pin Surface Mount (50/Tube) 8-Pin Surface Mount (1000/Reel) Pin Configuration + Control - Switch #1 - Control - Switch #1 + Control - Switch #2 - Control - Switch #2 AC/DC Configuration 1 8 2 7 3 6 4 5 Load - Switch #1 Load - Switch #1 Load - Switch #2 Load - Switch #2 Switching Characteristics of Normally Open Devices Form-A IF 90% 10% ILOAD ton DS-PAA110-R06 www.ixysic.com toff 1 INTEGRATED CIRCUITS DIVISION PAA110 Absolute Maximum Ratings @ 25C Parameter Blocking Voltage Reverse Input Voltage Input Control Current Peak (10ms) Input Power Dissipation 1 Total Power Dissipation 2 Isolation Voltage, Input to Output Operational Temperature Storage Temperature 1 Derate linearly 1.33 mW / C 2 Derate linearly 6.67 mW / C Ratings 400 5 50 1 150 800 3750 -40 to +85 -40 to +125 Units VP V mA A mW mW Vrms C C Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. Typical values are characteristic of the device at +25C, and are the result of engineering evaluations. They are provided for information purposes only, and are not part of the manufacturing testing requirements. Electrical Characteristics @ 25C Parameter Output Characteristics Load Current * Continuous, AC/DC Configuration Peak On-Resistance, AC/DC Configuration Off-State Leakage Current Switching Speeds Turn-On Turn-Off Output Capacitance Input Characteristics Input Control Current to Activate Input Control Current to Deactivate Input Voltage Drop Reverse Input Current Common Characteristics Input to Output Capacitance Conditions Symbol Min Typ Max Units t=10ms IL=150mA VL=400VP IL ILPK RON ILEAK - 15 - 150 400 22 1 mArms / mADC mAP A IF=0mA, VL=50V, f=1MHz ton toff COUT - 25 1 0.25 - IL=150mA IF=5mA VR=5V IF IF VF IR 0.4 0.9 - 0.7 1.2 - 5 1.5 10 mA mA V A VIO=0V, f=1MHz CIO - 3 - pF IF=5mA, VL=10V ms pF *NOTE: If both poles operate simultaneously, then load current must be derated in order not to exceed the package power dissipation value. 2 www.ixysic.com R06 INTEGRATED CIRCUITS DIVISION PAA110 PERFORMANCE DATA* 25 25 20 15 10 5 20 15 10 5 0 0 1.17 0.21 0.27 0.33 0.39 Turn-On Time (ms) Device Count (N) 10 5 0 5 0.05 0.07 0.09 0.11 0.13 Turn-Off Time (ms) 0.15 Typical On-Resistance Distribution (N=50, IF=5mA, IL=150mADC) 35 30 20 15 10 5 25 20 15 10 5 0 1.35 1.65 1.95 LED Current (mA) 10 0.45 25 15 1.05 15 Typical IF for Switch Dropout (N=50) 20 0.75 20 0 0.15 1.19 1.21 1.23 1.25 LED Forward Voltage Drop (V) Typical IF for Switch Operation (N=50, IL=150mADC) 25 Device Count (N) 25 Device Count (N) Device Count (N) Device Count (N) 30 Typical Turn-Off Time (N=50, IF=5mA, IL=150mADC) Typical Turn-On Time (N=50, IF=5mA, IL=150mADC) Device Count (N) 35 Typical LED Forward Voltage Drop (N=50, IF=5mA) 0 2.25 0.75 1.05 1.35 1.65 1.95 LED Current (mA) 2.25 13.1 13.7 14.3 14.9 15.5 On-Resistance (:) 16.1 Typical Blocking Voltage Distribution (N=50) 35 Device Count (N) 30 25 20 15 10 5 0 441.5 450.5 459.5 468.5 477.5 Blocking Voltage (VP) Typical Turn-On Time vs. LED Forward Current (IL=150mADC) 0.40 1.4 IF=50mA IF=30mA IF=20mA IF=10mA IF=5mA 1.2 1.0 Turn-Off Time (ms) 1.6 0.30 0.25 0.20 0.15 0.10 -40 -20 0 20 40 60 80 Temperature (C) 100 120 0.10 0.08 0.06 0.04 0.02 0.05 0 0 0.8 Typical Turn-Off Time vs. LED Forward Current (IL=150mADC) 0.12 0.35 Turn-On Time (ms) LED Forward Voltage Drop(V) Typical LED Forward Voltage Drop vs. Temperature 1.8 486.5 0 5 10 15 20 25 30 35 40 LED Forward Current (mA) 45 50 0 5 10 15 20 25 30 35 40 LED Forward Current (mA) 45 50 *Unless otherwise noted, data presented in these graphs is typical of device operation at 25C. For guaranteed parameters not indicated in the written specifications, please contact our application department. R06 www.ixysic.com 3 INTEGRATED CIRCUITS DIVISION PAA110 PERFORMANCE DATA* Typical Turn-On Time vs. Temperature (IL=150mADC) 0.14 IF=5mA IF=10mA IF=20mA 0.75 0.50 0.25 0.10 0.08 0.06 0.04 0.02 -20 0 20 40 60 Temperature (C) 80 0 -40 100 Typical IF for Switch Operation vs. Temperature (IL=150mADC) 3.0 20 40 60 Temperature (C) 80 1.5 1.0 0.5 -20 0 20 40 60 Temperature (C) 80 2.0 1.5 1.0 5 0 -20 0 20 40 60 Temperature (C) 80 -150 -2.5 -2.0 -1.5 -1.0 -0.5 0 0.5 1.0 1.5 2.0 2.5 Load Voltage (V) 100 Typical Leakage vs. Temperature Measured across Pins 5&6 or 7&8 0 Leakage (PA) 0.030 Blocking Voltage (VP) 0.035 475 50 470 465 460 455 -20 0 20 40 60 80 Temperature (C) 100 120 0.025 0.020 0.015 0.010 0.005 450 -40 100 -50 480 IF=20mA IF=10mA IF=5mA 80 50 250 100 20 40 60 Temperature (C) 100 300 150 0 Typical Load Current vs. Load Voltage (IF=5mA) Typical Blocking Voltage vs. Temperature Maximum Load Current vs. Temperature 200 -20 -100 -40 100 10 150 0 -40 15 -40 0.5 0 20 100 Load Current (mA) LED Current (mA) LED Current (mA) 0 2.5 2.0 Typical On-Resistance vs. Temperature (IF=5mA, IL=150mADC) 0 -20 Typical IF for Switch Dropout vs. Temperature (IL=150mADC) 3.0 2.5 Load Current (mA) On-Resistance (:) 1.00 0 -40 25 0.12 1.25 Turn-Off Time (ms) Turn-On Time (ms) 1.50 Typical Turn-Off Time vs. Temperature (IL=150mADC) -40 -20 0 20 40 60 Temperature (C) 80 100 10s 100s 0 -40 -20 0 20 40 60 Temperature (C) 80 100 Energy Rating Curve 1.2 Load Current (A) 1.0 0.8 0.6 0.4 0.2 0 10Ps 100Ps 1ms 10ms 100ms Time 1s *Unless otherwise noted, data presented in these graphs is typical of device operation at 25C. For guaranteed parameters not indicated in the written specifications, please contact our application department. 4 www.ixysic.com R06 INTEGRATED CIRCUITS DIVISION PAA110 Manufacturing Information Moisture Sensitivity All plastic encapsulated semiconductor packages are susceptible to moisture ingression. IXYS Integrated Circuits classifies its plastic encapsulated devices for moisture sensitivity according to the latest version of the joint industry standard, IPC/JEDEC J-STD-020, in force at the time of product evaluation. We test all of our products to the maximum conditions set forth in the standard, and guarantee proper operation of our devices when handled according to the limitations and information in that standard as well as to any limitations set forth in the information or standards referenced below. Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced product performance, reduction of operable life, and/or reduction of overall reliability. This product carries a Moisture Sensitivity Level (MSL) classification as shown below, and should be handled according to the requirements of the latest version of the joint industry standard IPC/JEDEC J-STD-033. Device Moisture Sensitivity Level (MSL) Classification PAA110 / PAA110S / PAA110P MSL 1 ESD Sensitivity This product is ESD Sensitive, and should be handled according to the industry standard JESD-625. Soldering Profile Provided in the table below is the Classification Temperature (TC) of this product and the maximum dwell time the body temperature of this device may be (TC - 5)C or greater. The classification temperature sets the Maximum Body Temperature allowed for this device during lead-free reflow processes. For through-hole devices, and any other processes, the guidelines of J-STD-020 must be observed. Device Classification Temperature (Tc) Dwell Time (tp) Max Reflow Cycles PAA110 PAA110S PAA110P 250C 250C 260C 30 seconds 30 seconds 30 seconds 1 3 3 Board Wash IXYS Integrated Circuits recommends the use of no-clean flux formulations. Board washing to reduce or remove flux residue following the solder reflow process is acceptable provided proper precautions are taken to prevent damage to the device. These precautions include, but are not limited to: using a low pressure wash and providing a follow up bake cycle sufficient to remove any moisture trapped within the device due to the washing process. Due to the variability of the wash parameters used to clean the board, determination of the bake temperature and duration necessary to remove the moisture trapped within the package is the responsibility of the user (assembler). Cleaning or drying methods that employ ultrasonic energy may damage the device and should not be used. Additionally, the device must not be exposed to flux or solvents that are Chlorine- or Fluorine-based. R06 www.ixysic.com 5 INTEGRATED CIRCUITS DIVISION PAA110 Mechanical Dimensions PAA110 2.540 0.127 (0.100 0.005) 9.652 0.381 (0.380 0.015) 8-0.800 DIA. (8-0.031 DIA.) 2.540 0.127 (0.100 0.005) 9.144 0.508 (0.360 0.020) 6.350 0.127 (0.250 0.005) Pin 1 PCB Hole Pattern 7.620 0.254 (0.300 0.010) 3.302 0.051 (0.130 0.002) 0.457 0.076 (0.018 0.003) 7.620 0.127 (0.300 0.005) 7.239 TYP. (0.285) 4.064 TYP (0.160) 7.620 0.127 (0.300 0.005) 0.254 0.0127 (0.010 0.0005) Dimensions mm (inches) 0.813 0.102 (0.032 0.004) PAA110S 9.652 0.381 (0.380 0.015) 2.540 0.127 (0.100 0.005) 6.350 0.127 (0.250 0.005) Pin 1 0.635 0.127 (0.025 0.005) 3.302 0.051 (0.130 0.002) 9.525 0.254 (0.375 0.010) 0.457 0.076 (0.018 0.003) PCB Land Pattern 2.54 (0.10) 8.90 (0.3503) 1.65 (0.0649) 7.620 0.254 (0.300 0.010) 0.254 0.0127 (0.010 0.0005) 0.65 (0.0255) 4.445 0.127 (0.175 0.005) Dimensions mm (inches) 0.813 0.102 (0.032 0.004) PAA110P 2.540 0.127 (0.100 0.005) 6.350 0.127 (0.250 0.005) 0 MIN / 0.102 MAX (0 MIN / 0.004 MAX) 9.398 0.127 (0.370 0.005) Pin 1 9.652 0.381 (0.380 0.015) 7.620 0.254 (0.300 0.010) 2.286 MAX. (0.090 MAX.) 2.54 (0.10) 0.635 0.127 (0.025 0.005) 0.203 0.013 (0.008 0.0005) 8.70 (0.3425) 1.55 (0.0610) 0.65 (0.0255) 2.159 0.025 (0.085 0.001) 0.457 0.076 (0.018 0.003) 0.864 0.120 (0.034 0.004) 6 PCB Land Pattern Dimensions mm (inches) www.ixysic.com R06 INTEGRATED CIRCUITS DIVISION PAA110 PAA110PTR Tape & Reel 2.00 (0.079) 330.2 DIA. (13.00 DIA.) Top Cover Tape Thickness 0.102 MAX. (0.004 MAX.) Embossment W = 16.00 (0.63) 7.50 (0.295) Bo = 10.30 (0.406) K0 = 2.70 (0.106) K1 = 2.00 (0.079) Embossed Carrier 4.00 (0.157) Ao = 10.30 (0.406) P1 = 12.00 (0.472) User Direction of Feed Dimensions mm (inches) NOTES: 1. All dimensions carry tolerances of EIA Standard 481-2 2. The tape complies with all "Notes" for constant dimensions listed on page 5 of EIA-481-2 PAA110STR Tape & Reel 330.2 DIA. (13.00 DIA.) Top Cover Tape Thickness 0.102 MAX. (0.004 MAX.) K0 =4.90 (0.193) K1 =4.20 (0.165) Embossed Carrier Embossment W=16.00 (0.63) Bo=10.30 (0.406) Ao=10.30 (0.406) P1=12.00 (0.472) User Direction of Feed Dimensions mm (inches) NOTES: 1. Dimensions carry tolerances of EIA Standard 481-2 2. Tape complies with all "Notes" for constant dimensions listed on page 5 of EIA-481-2 For additional information please visit our website at: www.ixysic.com IXYS Integrated Circuits makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in IXYS Integrated Circuits' Standard Terms and Conditions of Sale, IXYS Integrated Circuits assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of IXYS Integrated Circuits' product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. IXYS Integrated Circuits reserves the right to discontinue or make changes to its products at any time without notice. 7 Specification: DS-PAA110-R06 (c) Copyright 2018, IXYS Integrated Circuits OptoMOS(R) is a registered trademark of IXYS Integrated Circuits All rights reserved. Printed in USA. 6/27/2018