Model 1604-1607
FEATURES
• 50 in-lb to 100000 in-lb capacity
• 0.1 % non-linearity and hysteresis
• Speed sensor and/or foot mount (optional)
• High overload protection with high signal output (sensitivity)
• Minimal maintenance due to bearings only contact
• Carrier frequency excitation provides increased signal/noise
immunity
excitation provides increased signal/noise immunity. Capacity
range from 50 in-lb to 100000 in-lb for shaft mounting configura-
tions.
DESCRIPTION
A line of rotary transformer torque sensors often ideal for test
installations running long-term durability testing. Non-contact
nature of the signal transfer virtually eliminates the need for
maintenance. High overload protection with high signal output
helps prevent potential damage to the sensor. Carrier frequency
Standard Rotating Shaft Torque Sensor
2 Honeywell • Sensing and Control
Model 1604-1607
PERFORMANCE SPECIFICATIONS
Characteristic Measure
Torque range 50 lb-in to 100000 lb-in
Non-linearity ±0.1 % of rated output
Hysteresis ±0.1 % of rated output
Repeatability ±0.05 % of rated output
Output @ rated capacity 2 mV/V (nominal)
ENVIRONMENTAL SPECIFICATIONS
Characteristic Measure
Temperature, operating -29 °C to 93 °C [-20 °F to 200 °F]
Temperature, compensated 21 °C to 77 °C [70 °F to 170 °F]
Temperature effect, zero ±0.002 % of rated output/°F
Temperature effect, output ±0.002 % of reading/°F
ELECTRICAL SPECIFICATIONS
Characteristic Measure
Excitation 3.28 kHz optimum @ 10 Vac max. RMS
Insulation resistance > 5000 mOhm @ 50 Vdc
Bridge resistance 350 ohm (nominal)
Number of bridges 1
Zero balance ±1.0 % of rated output
TYPICAL SYSTEM DIAGRAM
24368-2 Speed Sensor
22236 Zero Velocity Pickup
Optional
1604: 25413-1
1605: 25413-9
1606: 25413-17
1607: 25413-11
Optional Foot Mount
Optional Calibration Arm
14086-1 (for 500-2000 in-lbs)
14086-2 (for 50-200 in-lbs)
Customer Supplied
Chart Recorder
Alarm Panel
Data Acquisition
Computer
PLC
7541-111 (Single Channel Display)
7541-112 (Dual Channel Display)
7541-115 (For Torque and Optional
Speed Display)
Display Units
Lebow Products
MODEL 7541
MENU
VIEW
TEST
TARE
HOLD
ESC
RESET
ENTER
Model 1604
Mating Connectors & Cables
064-LW13621 Mating connector
064-LW13656 Mating connector, speed pickup
064-LW25469 Mating connector, zero velocity speed pickup
7200-28-XX* Mating connector & 6 conductor cable
(unamplified unit with sense leads but not shunt cal)
7200-106-XX* Mating connector & 6 conductor cable
(for connection to instrument 7541)
7204-00-XX* Speed sensor cable, pigtail leads at instrument
7204-16-XX* Speed sensor cable to instrument 7541
7220-47-XX* Zero velocity speed sensor cable, pigtail leads at instrument
7220-119-XX* Zero velocity speed sensor cable to instrument 7541
* XX represents length in feet 100ft maximum
** XX represents length in feet 20ft maximum
Honeywell • Sensing and Control 3
Standard Rotating Shaft Torque Sensor
MECHANICAL SPECIFICATIONS
Model Capacity
lb-in
Capacity
N-m
Max speed
RPM
Protected for
overloads to lb-in
Torsional
stiffness lb-in/rad
Rotating inertia
lb-in sec2
Weight
kg [lb]
1604-50 50 5 10000 150 5000 2.59 x 10-3 8,20 [18]
1604-100 100 10 10000 300 13500 2.59 x 10-3 8,20 [18]
1604-200 200 20 10000 600 33000 2.59 x 10-3 8,20 [18]
1604-500 500 55 10000 1500 85000 2.59 x 10-3 8,20 [18]
1604-1K 1000 115 10000 3000 150000 2.59 x 10-3 8,20 [18]
1604-2K 2000 225 10000 3000 225000 2.59 x 10-3 8,20 [18]
1605-2K 2000 225 10000 6000 700000 8.41 x 10-3 12,70 [28]
1605-5K 5000 565 10000 15000 950000 8.41 x 10-3 12,70 [28]
1605-10K 10000 1130 10000 20000 1000000 8.41 x 10-3 12,70 [28]
1606-20K 20000 2250 6700 60000 4080000 3.62 x 10-2 18,20 [40]
1606-30K 30000 3390 6700 60000 4080000 3.62 x 10-2 18,20 [40]
1607-50K 50000 5650 6000 150000 11800000 0.15 34,10 [75]
1607-100K 100000 11300 6000 150000 19950000 0.47 34,10 [75]
MOUNTING DIMENSIONS
Model C
cm [in]
L
cm [in]
N
cm [in]
P
cm [in]
U
cm [in]
K
cm [in]
A
cm [in]
B
cm [in]
D
cm [in]
E
cm [in]
F
cm [in]
H
cm [in]
1604 25,40
[10]
15,24
[6]
5,32
[2]
10,16
[4]
2,54
[1.00]*
0,64
[0.25 sq]*
12,07
[4.75]
8,89
[3.50]
5,40
[2.13]
5,08
[2]
3,49
[1.38]
0,71 [0.28]
1605 32,39
[12.75]
18,42
[7.25]
6,99
[2.75]
11,99
[4.75]
3,81
[1.50]
0,95
[0.38 sq.]
16,51
[6.25]
10,16
[4]
6,35
[2.50]
6,67
[2.63]
3,81
[1.50]
1,03 [0.41]
1606 40,01
[15.75]
20,96
[8.25]
9,53
[3.75]
13,97
[5.50]
5,72
[2.25]
1,27
[0.50 sq.]
18,42
[7]
13,34
[5.25]
7,62
[3]
7,62
[3]
5,08
[2]
1,35 [0.53]
1607 48,26
[19]
22,23
[8.75]
13,02
[5.13]
16,51
[6.50]
7,62
[3.00]
1,91
[0.75 sq.]
24,59
[8.50]
13,97
[5.50]
8,89
[3.50]
8,89
[3.50]
5,08
[2]
1,35 [0.53]
* 50, 100, 200 lb-in units: K=3/16 in sq., U=3/4 in
RECEP.
MS-3102E-14S-5P
OPTIONAL
FOOT MOUNT
U DIA.
+.0000
-.0005
N N
F F
B
L
C
P
H
4 HOLES
EE
A
OPTIONAL
SPEED SENSOR
1/4-28 UNF. THRU
ATTACH RESTRAINING STRAP
WHEN NOT FOOT MOUNTED
K
+.000
-.010
RECEP.
MS-3102E-14S-5P
OPTIONAL
FOOT MOUNT
U DIA.
+.0000
-.0005
N N
F F
B
L
C
P
H
4 HOLES
EE
A
OPTIONAL
SPEED SENSOR
1/4-28 UNF. THRU
ATTACH RESTRAINING STRAP
WHEN NOT FOOT MOUNTED
K
+.000
-.010
For reference only
Sensing and Control
Honeywell
1985 Douglas Drive North
Golden Valley, MN 55422 USA
honeywell.com
008778-2-EN IL50 GLO
July 2014
Copyright © 2014 Honeywell International Inc. All rights reserved.
Model 1604-1607 Standard Rotating Shaft Torque Sensor
Warranty. Honeywell warrants goods of its manufacture as
being free of defective materials and faulty workmanship.
Honeywell’s standard product warranty applies unless agreed
to otherwise by Honeywell in writing; please refer to your
order acknowledgement or consult your local sales office for
specific warranty details. If warranted goods are returned to
Honeywell during the period of coverage, Honeywell will repair
or replace, at its option, without charge those items it finds
defective. The foregoing is buyer’s sole remedy and is in lieu
of all warranties, expressed or implied, including those of
merchantability and tness for a particular purpose. In no
event shall Honeywell be liable for consequential, special, or
indirect damages.
While we provide application assistance personally, through our
literature and the Honeywell web site, it is up to the customer to
determine the suitability of the product in the application.
WARNING
PERSONAL INJURY
• DO NOT USE these products as safety or emergency
stop devices or in any other application where failure of
the product could result in personal injury.
Failure to comply with these instructions could result in
death or serious injury.
WARNING
MISUSE OF DOCUMENTATION
• The information presented in this datasheet is for
reference only. DO NOT USE this document as product
installation information.
• Complete installation, operation and maintenance
information is provided in the instructions supplied with
each product.
Failure to comply with these instructions could result in
death or serious injury.
Find out more
Honeywell serves its customers
through a worldwide network of
sales offices, representatives
and distributors. For application
assistance, current specifica-
tions, pricing or name of the
nearest Authorized Distributor,
contact your local sales office.
To learn more about Honeywell’s
test and measurement products,
call +1-614-850-5000, visit
http://measurementsensors.
honeywell.com, or e-mail inqui-
ries to info.tm@honeywell.com
