METRIC MIL-DTL-38999/25C 29 August 2011 SUPERSEDING MIL-DTL-38999/25B 10 July 2008 DETAIL SPECIFICATION SHEET CONNECTOR, ELECTRICAL, CIRCULAR, THREADED, RECEPTACLE, SOLDER MOUNTING, HERMETIC, HERMETIC SOLDER CONTACTS, SERIES III, METRIC This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this specification sheet and MIL-DTL-38999. FIGURE 1. Receptacle, classes N and Y. AMSC N/A FSC 5935 MIL-DTL-38999/25C Shell size Shell size code F max L max S max V max with pins V max with sockets Z max 9 A 17.1 (.673) 5.1 (.201) 19.4 (.764) 17.2 (.677) 19.4 (.764) 23.8 (.937) 11 B 19.9 (.783) 5.1 (.201) 21.8 (.858) 17.2 (.677) 19.4 (.764) 23.8 (.937) 13 C 23.1 (.909) 5.1 (.201) 24.9 (.980) 17.2 (.677) 19.4 (.764) 23.8 (.937) 15 D 26.2 (1.031) 5.1 (.201) 28.1 (1.106) 17.2 (.677) 19.4 (.764) 23.8 (.937) 17 E 29.4 (1.157) 5.1 (.201) 31.3 (1.232) 17.2 (.677) 19.4 (.764) 23.8 (.937) 19 F 31.8 (1.252) 5.1 (.201) 33.6 (1.323) 17.2 (.677) 19.4 (.764) 23.8 (.937) 21 G 35.0 (1.378) 5.1 (.201) 36.8 (1.449) 17.2 (.677) 19.4 (.764) 23.8 (.937) 23 H 38.2 (1.504) 5.9 (.232) 40.0 (1.575) 17.2 (.677) 19.4 (.764) 24.6 (.969) 25 J 41.3 (1.626) 5.9 (.232) 43.2 (1.701) 17.2 (.677) 19.4 (.764) 24.6 (.969) NOTES: 1. Dimensions are in millimeters. 2. Polarizing position N is shown. 3. Inch equivalents are given for information only. FIGURE 1. Receptacle, classes N and Y - Continued. 2 MIL-DTL-38999/25C REQUIREMENTS: Dimensions and configurations: See figure 1. Interface dimensions shall conform to MIL-DTL-38999. This connector mates with MIL-DTL-38999/26. For insert arrangements, see MIL-STD-1560. Part or Identifying Number (PIN) example: D38999/ 25 Y A 35 P N DoD no. prefix Specification sheet no. Class Shell size code Insert arrangement Contact style Polarizing position (N is required for normal position) Eyelet contact termination: See MIL-DTL-38999. Changes from previous issue. Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes. Referenced documents. In addition to MIL-DTL-38999, this document references the following: MIL-DTL-38999/26 MIL-STD-1560 3 MIL-DTL-38999/25C CONCLUDING MATERIAL Custodians: Army - CR Navy - AS Air Force - 85 DLA - CC Preparing activity: DLA - CC (Project 5935-2011-085) Review activities: Army - AR, MI Navy - EC, MC, OS Air Force - 19, 99 DLA - IS NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https://assist.daps.dla.mil. 4