MCC TM Micro Commercial Components S K 2 2 -L THRU S K 2 2 0 -L omponents 20736 Marilla Street Chatsworth !"# $ % !"# Features * * * * * * * Lead Free Finish/Rohs Compliant (Note1) ("P"Suffix designates Compliant. See ordering information) Epoxy meets UL 94 V-0 flammability rating Moisture Sensitivity Level 1 Low Forward Voltage Halogen free available upon request by adding suffix "-HF" High Current Capability Extremely Low Thermal Resistance Maximum Ratings * Operating Temperature: -55C to +125C * * Storage Temperature: -55C to +150C Maximum Thermal Resistance:RthjL-15 C/W;Rthja- 71 C/W 2 Amp Schottky Rectifier 20 to 200 Volts DO-214AA (SMB) (LEAD FRAME) A MCC Catalog Number Device Marking SK22-L SK23-L SK24-L SK25-L SK26-L SK28-L SK210-L SK2150-L SK220-L SK22 SK23 SK24 SK25 SK26 SK28 SK210 SK2150 SK220 Maximum Recurrent Peak Reverse Voltage 20V 30V 40V 50V 60V 80V 100V 150V 200V Maximum RMS Voltage 14V 21V 28V 35V 42V 56V 70V 105V 140V Maximum DC Blocking Voltage 20V 30V 40V 50V 60V 80V 100V 150V 200V B C F H D G E Electrical Characteristics @ 25C Unless Otherwise Specified Average Forward Current Peak Forward Surge Current Maximum Instantaneous Forward Voltage SK22-SK24 SK25-SK26 SK28-SK210 SK2150-SK220 Maximum DC Reverse Current At Rated DC Blocking Voltage SK22-SK24 SK25-SK210 SK2150-SK220 Typical Junction Capacitance SK22 SK23-SK210 SK2150-SK220 IF(AV) IFSM VF 2.0A DIMENSIONS TL = 105C 50A 8.3ms, half sine .50V .70V .85V .90V IFM = 2.0A; TJ = 25C* IR MAX 4.70 3.94 0.31 1..52 5.59 2.44 2.21 0.203 NOTE 0.106" TJ = 25C 230pF 50pF 170 pF MM MIN 4.06 3.30 0.15 0.76 5.08 2.00 1.91 0.05 MAX .185 .155 .012 .060 .220 .096 .087 .008 SUGGESTED SOLDER PAD LAYOUT 2.0 mA 1.0 mA 0.5 mA CJ DIM A B C D E F G H INCHES MIN .160 .130 .006 .030 .200 .079 .075 .002 0.083" Measured at 1.0MHz, VR=4.0V 0.050" *Pulse test: Pulse width 300 sec, Duty cycle 2% Note: www.mccsemi.com 1. High Temperature Solder Exemptions Applied, see EU Directive Annex 7. Revision: D 1 of 4 2013/08/20 MCC SK22-L thru SK210-L 10 IF, INSTANTANEOUS FORWARD CURRENT (A) I(AV), AVERAGE FORWARD CURRENT (A) Rating and Characteristic Curves 2.0 1.0 0 25 50 75 100 125 150 SK28 - S210 0.1 Tj - 25C IF Pulse Width = 300 s 0.01 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 TL , LEAD TEMPERATURE (C) VF, INSTANTANEOUS FWD VOLTAGE (V) Fig. 2 Typ. Forward Characteristics Fig. 1 Forward Current Derating Curve 60 1000 Tj = 25C f = 1 MHz Single Half Sine-Wave (JEDEC Method) Cj, JUNCTION CAPACITANCE (pF) IFSM, PEAK FORWARD SURGE CURRENT (A) SK25 - SK26 SK22 - SK24 1.0 45 30 15 Tj = 150C 0 100 10 1 100 10 0.1 NUMBER OF CYCLES AT 60 Hz 10 100 VR, REVERSE VOLTAGE (V) Fig. 4 Typical Junction Capacitance Fig. 3 Max Non-Repetitive Peak Fwd Surge Current IR, INSTANTANEOUS REVERSE CURRENT (mA) 1 100 10 Tj = 100C 1.0 Tj = 75C 0.1 0.01 Tj = 25C 0.001 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) Fig. 5 Typical Reverse Characteristics Revision: D www.mccsemi.com 2 of 4 2013/08/20 MCC SK2150-L thru SK220-L Rating and Characteristic Curves F IG .2-T Y P IC AL F OR WAR D 2.0 50 1.6 1.2 0.8 0.4 0 0 20 40 60 80 100 120 140 160 180 200 AMBIENT TEMPERATURE,( C) PEAK FORWARD SURGE CURRENT,(A) F IG .3-MAXIMUM NON-R E P E T IT IV E F OR WAR D S UR G E C UR R E NT INSTANTANEOUS FORWARD CURRENT,(A) AVERAGE FORWARD CURRENT,(A) CHARACTERISTICS 2.4 10 1.0 Tj=25 C Pulse Width 300us 0.1 50 .01 .1 40 .3 .5 .7 .9 1.1 1.3 1.5 FORWARD VOLTAGE,(V) 30 Tj=25 C 8.3ms Single Half Sine Wave 20 JEDEC method 10 FIG.5 - TYPICAL REVERSE 0 CHARACTERISTICS 1 5 10 50 100 100 NUMBER OF CYCLES AT 60Hz REVERSE LEAKAGE CURRENT, (mA) FIG.4-TYPICAL JUNCTION CAPACITANCE JUNCTION CAPACITANCE,(pF) 700 600 500 400 300 10 1.0 .1 200 100 0 ..01 .01 .05 .1 .5 1 5 10 50 100 REVERSE VOLTAGE,(V) Revision: D 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAG E ,(%) www.mccsemi.com 3 of 4 2013/08/20 MCC TM Micro Commercial Components Ordering Information : Device Packing Tape&Reel: 3Kpcs/Reel SK22-LTP~SK220-LTP Note : Adding "-HF" suffix for halogen free, eg. SK22-LTP-HF~SK220-LTP-HF ***IMPORTANT NOTICE*** Micro Commercial Components Corp. reserves the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are represented on our website, harmless against all damages. ***LIFE SUPPORT*** MCC's products are not authorized for use as critical components in life support devices or systems without the express written approval of Micro Commercial Components Corporation. ***CUSTOMER AWARENESS*** Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages customers to purchase MCC parts either directly from MCC or from Authorized MCC Distributors who are listed by country on our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine parts, have full traceability, meet MCC's quality standards for handling and storage. MCC will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. MCC is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. Revision: D www.mccsemi.com 4 of 4 2013/08/20 3