P05E11.pdf 02.9.2 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage storageand andoperating, operating,rating, rating,soldering solderingand andmounting, mounting,handling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specification or to transact theour approval for product specificaion before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approve productsheet specification or transact the approval sheet for product specification before ordering. Ceramic Filters (CERAFILr)/Ceramic Discriminators for Communications Equipment CERAFILr MHz SMD Type SFECS10M8 Series 3.450.2 3.100.2 The SFECS10M8 series are small, high performance and super thin (1.4mm) filters. Piezoelectric element is connected in the sandwich shape by heat resistant substrate. The filters exhibit flat GDT characteristic in pass band. The filters are recommended for digital communication applications and are perfect in hand held cellular phones, pocket cordless phones, etc. 1.40.1 Input electrode marker +0.3 0~0.3 0.60.3 0.4-0.2 0.60.3 0~0.3 0.850.3 (1.35) (1.35) 0.70.3 0.70.3 0.70.3 (1) (2) (4) 0.850.3 Features (1) : Input (2) : Ground (3) : Float (Signal line) (4) : Output ( ) : Reference : EIAJ Monthly Code (3) 0~0.3 (in mm) (1.30) (1.30) 0~0.3 1. The filters are mountable by automatic placers. 2. They are slim, at only 1.4mm thickness, and have a small mounting area (3.5x3.1mm2) enabling flexible PCB design. 3. Types with 10.7/10.75/10.8MHz of center frequency are available. 4. Operating temperature range : -10 to +50 (degree C) Storage temperature range : -40 to +85 (degree C) Nominal Center 3dB Frequency (fn) Bandwidth (MHz) (kHz) Part Number 8 Stop Bandwidth (kHz) Insertion Loss (dB) Ripple (dB) Spurious Response (dB) GDT Deviation (s) Absolute GDT (s) Input/Output Impedance (ohm) SFECS10M8PF00-R0 10.800 fn110 min. fn310 max. [within 20dB] 6.0 max. [at fn] 0.5 max. [within fn100kHz] - 1.5 max. [within fn100kHz] 2.8 1.0s [at fn] 330 SFECS10M8RF00-R0 10.800 fn135 min. fn350 max. [within 20dB] 6.0 max. [at fn] 0.5 max. [within fn100kHz] - 1.2 max. [within fn100kHz] 2.6 1.0s [at fn] 330 SFECS10M8SF00-R0 10.800 fn150 min. fn420 max. [within 20dB] 5.0 max. [at fn] 1.0 max. [within fn110kHz] 25 min. [within 9 to 12 MHz] 1.5 max. [within fn110kHz] - 330 For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. Test Circuit 3 R1 2 1 Rg 4 E1 E2 R2 C2 RF Voltmeter S.S.G. =-10dBm Rg + R1 = R2 = Input/Output Impedance C2 = 10pF 1 2 3 4 : Input : Ground : Flout : Output 21 P05E11.pdf 02.9.2 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage storageand andoperating, operating,rating, rating,soldering solderingand andmounting, mounting,handling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specification or to transact theour approval for product specificaion before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approve productsheet specification or transact the approval sheet for product specification before ordering. Frequency Characteristics SFECS10M8PF00-R0 SFECS10M8PF00-R0 7 0 0 6 20 4 4 6 Attenuation (dB) 5 G. D. T. (sec) Attenuation (dB) 2 40 60 3 8 80 2 10.6 10.7 10.8 Frequency (MHz) 8 22 10.9 11.0 9.6 10.2 10.8 Frequency (MHz) 11.4 12.0 P05E11.pdf 02.9.2 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage storageand andoperating, operating,rating, rating,soldering solderingand andmounting, mounting,handling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specification or to transact theour approval for product specificaion before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approve productsheet specification or transact the approval sheet for product specification before ordering. Ceramic Filters (CERAFILr)/Ceramic Discriminators for Communications Equipment CERAFILr MHz SMD Type SFECS10M7 Series 3.450.2 3.100.2 The SFECS10M7 series are small, high performance and super thin (1.4mm) filters. Piezoelectric element is connected in the sandwich shape by heat resistant substrate. The filters are recommended for digital communication applications and are perfect in pocket cordless phones, RKE (Remote Keyless Entry), TPMS (Tire Pressure Monitoring System) etc. 1.40.1 Input electrode marker +0.3 0~0.3 0.60.3 0.4-0.2 0.60.3 0~0.3 0.850.3 (1.35) (1.35) 0.70.3 0.70.3 0.70.3 (1) (2) (4) 0.850.3 Features 0~0.3 1. The filters are mountable by automatic placers. 2. They are slim, at only 1.4mm thickness, and have a small mounting area (3.5x3.1mm2) enabling flexible PCB design. 3. Various bandwidths are available. Select a suitable type in accordance with the desires selectivity. 4. Operating temperature range : -10 to +50 (degree C) Storage temperature range : -40 to +85 (degree C) (1) : Input (2) : Ground (3) : Float (Signal line) (4) : Output ( ) : Reference : EIAJ Monthly Code (3) (1.30) (1.30) 0~0.3 (in mm) 9 Center Nominal Center 3dB Bandwidth Attenuation Insertion Loss Ripple Spurious Input/Output Frequency (fo) Frequency(fn) (at minimum loss point) (within 3dB B.W.) Attenuation Impedance (kHz) (kHz) (MHz) (MHz) (dB) (dB) (dB) (ohm) Part Number SFECS10M7HA00-R0 10.700 30kHz - 180 40kHz 470 max. 4.5 2.0dB 1.0 max. 30 min. 330 SFECS10M7GA00-R0 10.700 30kHz - 230 50kHz 510 max. 3.5 2.0dB 1.0 max. 30 min. 330 SFECS10M7FA00-R0 10.700 30kHz - 280 50kHz 590 max. 3.0 2.0dB 1.0 max. 30 min. 330 SFECS10M7EA00-R0 10.700 30kHz - 330 50kHz 700 max. 3.0 2.0dB 1.0 max. 30 min. 330 - 10.700 fn 200kHz min. 950 max. 3.0 2.0dB 3.0 max. 20 min. 330 SFECS10M7DF0021-R0 Area of Attenuation : [within 20dB] Area of Spurious Attenuation : [within 9MHz to 12MHz] Center frequency (fo) defined by center of 3dB bandwidth. Center Frequency Rank Code CODE 30kHz Step 25kHz Step D 10.64MHz30kHz 10.650MHz25kHz B 10.67MHz30kHz 10.675MHz25kHz A 10.70MHz30kHz 10.700MHz25kHz C 10.73MHz30kHz 10.725MHz25kHz E 10.76MHz30kHz 10.750MHz25kHz Z Combination A,B,C,D,E M Combination A,B,C Continued on the following page. 23 P05E11.pdf 02.9.2 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage storageand andoperating, operating,rating, rating,soldering solderingand andmounting, mounting,handling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specification or to transact theour approval for product specificaion before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approve productsheet specification or transact the approval sheet for product specification before ordering. Continued from the preceding page. Test Circuit (3) (2) R1 (1) (4) Rg E1 R2 C2 E2 RF Voltmeter S.S.G. =-10dBm Rg=50 R1=280 R2=330 C2=10pF (Including stray capacitance and Input capacitance of RF Voltmeter) (1) : Input (2) : Ground (3) : Float (4) : Output Frequency Characteristics SFECS10M7FA00-R0 SFECS10M7FA00-R0 0 4.60 0 4.40 2 10 4.20 3.80 3.60 6 3.40 Attenuation (dB) 4 G.D.T. (sec.) Attenuation (dB) 4.00 20 30 3.20 8 3.00 40 2.80 9 10 10.500 10.600 10.700 Frequency (MHz) 24 10.800 10.900 2.60 50 8.700 9.700 10.700 Frequency (MHz) 11.700 12.700 P05E11.pdf 02.9.2 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage storageand andoperating, operating,rating, rating,soldering solderingand andmounting, mounting,handling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specification or to transact theour approval for product specificaion before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approve productsheet specification or transact the approval sheet for product specification before ordering. MHz SMD Type CERAFILr Notice Notice (Soldering and Mounting) 1. Standard Reflow Soldering Condition (1) Reflow Filter is soldered twice within the following temperature condition and then being placed in natural condition for 24 +1 -0 hours. 2. Wash The component cannot be withstand washing. Temperature (C) (2) Soldering Iron Filter is soldering at +2805C for 31 seconds and the being placed in natural condition for 24 hours. The soldering iron shall not touch the filter while soldering. Peak (240 C max.) 240 200 Heating (200 C) Pre-heating 100 (120-170 C) 30sec. min. 60sec.-120sec. Gradual Cooling 30sec. max. 120sec. min. Notice (Handling) 1. The component will be damaged when an excessive stress is applied. 2. The component may be damaged if excess mechanical stress is applied to it mounted on the printed circuit board. 3. Design layout of components on the PC board to minimize the stress imposed on the warp or flexure of the board. 4. After installing chips, if solder is excessively applied to the circuit board, mechanical stress will cause destruction resistance characteristics to lower. To prevent this, be extremly careful in determining shape and dimension before designing the circuit board diagram. 5. When the positioning claws and pick up nozzle are worn, the load is applied to the chip while positioning is concentrated to one positioning accuracy, etc. Careful checking and maintenance are necessary to prevent unexpected trouble. 6. When correcting chips with a soldering iron, the tip of the soldering iron should not directly touch the chip component. Depending on the soldering conditions, the effective area of terminations may be reduced. The use of solder containing Ag should be done to prevent the electrode erosion. 7. Do not clean or wash the component as it is not hermetically sealed. 8. In case of covering discriminator with over coat, conditions such as material of resin, cure temperature, and so on should be evaluated well. 9. Do not use strong acidity flux, more than 0.2wt% chlorine content, in re-flow soldering. 10. Accurate test circuit values are required to measure electrical characteristics. It may be a cause of mis-correlation if there is any deviation, especially stray capacitance, from the test circuit in the specification. [Component layout close to board] Perforation A B Slit C Susceptibility to stress is in the order of; A>C>B 9 25 P05E11.pdf 02.9.2 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage storageand andoperating, operating,rating, rating,soldering solderingand andmounting, mounting,handling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specification or to transact theour approval for product specificaion before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approve productsheet specification or transact the approval sheet for product specification before ordering. SMD Type CERAFILr Standard Land Pattern Dimensions SFPCA Series 6.95 2.0 2.475 2.0 1.8 1.3 1.55 1.6 7.45 1.3 1.6 1.8 0.8 CFXCD Series 0.925 2.0 0.9 1.1 (in mm) 2.0 (in mm) CFUCG/CFUCF Series 0.7 1.2 CFWCA Series 0.7 1.2 1.4 11.5 5.5 3.0 3.0 3.5 6.5 7.5 max. 2.0 1.2 9 0.75 2.0 2.1 2.0 4-R3.0 1.8 (in mm) (in mm) SFECS Series 0.1 CFXCA Series 1.0 (2) 7.0 (1) 0.1 0.8 0.6 0.8 0.6 0.8 It shoes solder resist land pattern. 5.0 (in mm) (3) 0.1 1.5 0.3 0.1 2.0 0.3 0.1 (4) 1.05 1.0 1.40 1.0 1.05 1.0 0.3 1.0 0.1 (1) : Input (2) : Ground (3) : Float (Signal Line) (4) : Output (in mm) 26