CNY117 www.vishay.com Vishay Semiconductors Optocoupler, Phototransistor Output, with Base Connection, 110 C Rated FEATURES * Operating temperature from -55 C to +110 C * Breakdown voltage, 5000 VRMS A 1 6 B C 2 5 C * Industry standard dual-in-line package NC 3 4 E * Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 * Long term stability APPLICATIONS * AC adapter * SMPS i179004-14 * PLC DESCRIPTION * Factory automation The CNY117 is a 110 C rated optocoupler consisting of a gallium arsenide infrared emitting diode optically coupled to a silicon planar phototransistor detector in a plastic plug-in DIP-6 package. * Game consoles AGENCY APPROVALS Safety application model number covering all products in this datasheet is CNY117. This model number should be used when consulting safety agency documents. The coupling device is suitable for signal transmission between two electrically separated circuits. The potential difference between the circuits to be coupled is not allowed to exceed the maximum permissible reference voltages. * UL file no. E52744 * cUL tested to CSA 22.2 bulletin 5A * DIN EN 60747-5-5 (VDE 0884-5), available with option 1 * BSI: EN 60065, EN 60950-1 * CQC GB8898-2011 ORDERING INFORMATION C N Y 1 1 7 - PART NUMBER # CTR BIN X 0 # PACKAGE OPTION # DIP-6 Option 6 7.62 mm 10.16 mm T TAPE AND REEL Option 7 > 8 mm AGENCY CERTIFIED/PACKAGE UL, cUL, BSI CTR (%) 40 to 80 63 to 125 100 to 200 CNY117-1 CNY117-2 CNY117-3 CNY117-4 DIP-6, 400 mil, option 6 CNY117-1X006 CNY117-2X006 CNY117-3X006 CNY117-4X006 SMD-6, option 7 CNY117-1X007T CNY117-2X007T CNY117-3X007T CNY117-4X007T 40 to 80 63 to 125 100 to 200 160 to 320 CNY117-1X001 CNY117-2X001 CNY117-3X001 CNY117-4X001 DIP-6 VDE, UL, cUL, BSI DIP-6 160 to 320 DIP-6, 400 mil, option 6 CNY117-1X016 CNY117-2X016 CNY117-3X016 CNY117-4X016 SMD-6, option 7 CNY117-1X017T CNY117-2X017T CNY117-3X017T CNY117-4X017T Note * Additional options may be possible, please contact sales office. Rev. 1.9, 08-Jan-14 Document Number: 83876 1 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 CNY117 www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS (Tamb = 25 C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL VALUE UNIT Reverse voltage VR 6.0 V DC forward current IF 60 mA INPUT t 10 s Surge forward current Power dissipation IFSM 2.5 A Pdiss 100 mW BVCEO 70 V IC 50 mA ICM 100 mA Pdiss 150 mW VISO 5000 VRMS Tstg -55 to +150 C Tamb -55 to +110 C Tsld 260 C Pdiss 250 mW OUTPUT Collector emitter breakdown voltage Collector current tp/T = 0.5, tp 10 ms Collector peak current Output power dissipation COUPLER Isolation test voltage between emitter and detector referred to standard climate 23/50 DIN 50014 t = 1 min Storage temperature range Ambient temperature range Soldering temperature (1) 2 mm from case, 10 s Total power dissipation Notes * Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum ratings for extended periods of the time can adversely affect reliability. (1) Refer to reflow profile for soldering conditions for surface mounted devices (SMD). Refer to wave profile for soldering conditions for through hole devices (DIP). ELECTRICAL CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT 1.39 1.65 V 10 A INPUT Forward voltage IF = 60 mA VF Breakdown voltage IR = 10 A VBR VR = 6 V IR 0.01 VR = 0 V, f = 1 MHz CO 25 pF Reverse current Capacitance 6 V OUTPUT Collector emitter capacitance VCE = 5 V, f = 1 MHz CCE 5.2 pF Base collector capacitance VCE = 5 V, f = 1 MHz CBC 6.5 pF Emitter base capacitance VCE = 5 V, f = 1 MHz CEB 7.5 pF IF = 10 mA, IC = 2.5 mA VCEsat 0.25 CC 0.6 COUPLER Collector emitter, saturation voltage Coupling capacitance Collector emitter, leakage current VCE = 10 V 0.4 V pF CNY117-1 ICEO 2.0 50 nA CNY117-2 ICEO 2.0 50 nA CNY117-3 ICEO 5.0 100 nA CNY117-4 ICEO 5.0 100 nA Note * Minimum and maximum values were tested requierements. Typical values are characteristics of the device and are the result of engineering evaluations. Typical values are for information only and are not part of the testing requirements. Rev. 1.9, 08-Jan-14 Document Number: 83876 2 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 CNY117 www.vishay.com Vishay Semiconductors CURRENT TRANSFER RATIO (Tamb = 25 C, unless otherwise specified) PARAMETER TEST CONDITION IF = 10 mA Current transfer ratio IF = 1.0 mA PART SYMBOL MIN. MAX. UNIT CNY117-1 CTR 40 TYP. 80 % CNY117-2 CTR 63 125 % CNY117-3 CTR 100 200 % CNY117-4 CTR 160 320 CNY117-1 CTR 13 30 % CNY117-2 CTR 22 45 % CNY117-3 CTR 34 70 % CNY117-4 CTR 56 90 % % Note * Current transfer ratio IC/IF at VCE = 5.0 V, 25 C and collector emitter leakage current by dash number. SWITCHING CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT LINEAR OPERATION (without saturation) Turn-on time IF = 10 mA, VCC = 5.0 V, RL = 75 ton 3.0 s Rise time IF = 10 mA, VCC = 5.0 V, RL = 75 tr 2.0 s Turn-off time IF = 10 mA, VCC = 5.0 V, RL = 75 toff 2.3 s Fall time IF = 10 mA, VCC = 5.0 V, RL = 75 tf 2.0 s Cut-off frequency IF = 10 mA, VCC = 5.0 V, RL = 75 fCO 110 kHz SWITCHING OPERATION (with saturation) IF = 20 mA Turn-on time Rise time Turn-off time Fall time CNY117-1 ton 3.0 s CNY117-2 ton 4.2 s CNY117-3 ton 4.2 s IF = 5.0 mA CNY117-4 ton 6.0 s IF = 20 mA CNY117-1 tr 2.0 s CNY117-2 tr 3.0 s CNY117-3 tr 3.0 s IF = 10 mA IF = 10 mA IF = 5.0 mA CNY117-4 tr 4.6 s IF = 20 mA CNY117-1 toff 18 s CNY117-2 toff 23 s CNY117-3 toff 23 s IF = 5.0 mA CNY117-4 toff 25 s IF = 20 mA CNY117-1 tf 11 s CNY117-2 tf 14 s CNY117-3 tf 14 s CNY117-4 tf 15 s IF = 10 mA IF = 10 mA IF = 5.0 mA Rev. 1.9, 08-Jan-14 Document Number: 83876 3 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 CNY117 www.vishay.com IF Vishay Semiconductors +5V IF IF 0 0 tp IC R G = 50 tp = 0.01 T t 100 % 90 % t p = 50 s Channel I Oscilloscope R L = 1 M C L = 20 pF Channel II 50 10 % 0 tr RL td ts t on 95 10804-3 Fig. 1 - Test Circuit, Non-Saturated Operation IF +5V I F = 10 mA 0 tp td tr t on (= td + tr) tf t off ts tf t off (= ts + tf) Pulse duration Delay time Rise time Turn-on time t Storage time Fall time Turn-off time 96 11698 Fig. 3 - Switching Times IC R G = 50 tp = 0.01 T t p = 50 s Channel I Channel II 50 Oscilloscope R L 1 M C L 20 pF 1 k 95 10843 Fig. 2 - Test Circuit, Saturated Operation SAFETY AND INSULATION RATINGS PARAMETER SYMBOL VALUE UNIT Output safety power PSO 700 mW Input safety current ISI 400 mA Safety temperature TSI 175 C Comparative tracking index CTI 175 MAXIMUM SAFETY RATINGS INSULATION RATED PARAMETERS Maximum withstanding isolation voltage VISO 5000 Maximum transient isolation voltage VIOTM 8000 Vpeak Maximum repetitive peak isolation voltage VIORM 890 Vpeak VRMS Insulation resistance Tamb = 25 C, VDC = 500 V RIO 1012 Isolation resistance Tamb = 100 C, VDC = 500 V RIO 1011 Climatic classification (according to IEC 68 part 1) 55/115/21 Environment (pollution degree in accordance to DIN VDE 0109) Creepage distance Clearance distance Insulation thickness 2 Standard DIP-4 7 mm SMD 7 mm Standard DIP-4 8 mm SMD 8 mm 0.4 mm DTI Note * As per DIN EN 60747-5-5, 7.4.3.8.2, this optocoupler is suitable for "safe electrical insulation" only within the safety ratings. Compliance with the safety ratings shall be ensured by means of protective circuits. Rev. 1.9, 08-Jan-14 Document Number: 83876 4 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 CNY117 www.vishay.com Vishay Semiconductors 1.8 1.7 Tamb = 25 C 1.6 Tamb = 0 C 1.5 1.4 Tamb = - 25 C 1.3 T = - 55 C amb 1.2 1.1 Tamb = 50 C 1.0 Tamb = 75 C 0.9 Tamb = 100 C 0.8 0.7 Tamb = 110 C 0.6 0.1 1 10 100 10 000 IF = 0 mA ICE0 - Leakage Current (nA) VF - Forward Voltage (V) TYPICAL CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) 1000 100 VCE = 24 V 10 VCE = 12 V 1 0.1 0.01 0.001 - 60 - 40 - 20 0 20 40 60 80 100 120 IF - Forward Current (mA) Tamb - Ambient Temperature (C) Fig. 4 - Forward Voltage vs. Forward Current Fig. 7 - Leakage Current vs. Ambient Temperature 60 1.2 CTRNorm - Normalized CTR (NS) IC - Collector Current (mA) VCE = 40 V IF = 30 mA 50 40 IF = 20 mA 30 IF = 15 mA 20 IF = 10 mA 10 IF = 5 mA 0 0 1 2 3 4 5 7 6 0.8 0.6 0.4 0.2 0 -60 -40 -20 8 VCE = 5 V IF = 10 mA 1.0 0 20 40 60 80 100 120 VCE - Collector Emitter Voltage (NS) (V) Tamb - Ambient Temperature (C) Fig. 5 - Collector Current vs. Collector Emitter Voltage (NS) Fig. 8 - Normalized CTR (NS) vs. Ambient Temperature 25 IC - Collector Current (mA) 20 15 IF = 10 mA 10 IF = 5 mA 5 IF = 1 mA IF = 2 mA 0 0.1 0 0.2 0.3 0.4 CTRNorm - Normalized CTR (sat) 1.2 IF = 25 mA VCE = 0.4 V IF = 10 mA 1.0 0.8 0.6 0.4 0.2 0 -60 -40 -20 0 20 40 60 80 100 120 VCE - Collector Emitter Voltage (sat) (V) Tamb - Ambient Temperature (C) Fig. 6 - Collector Current vs. Collector Emitter Voltage (sat) Fig. 9 - Normalized CTR (sat) vs. Ambient Temperature Rev. 1.9, 08-Jan-14 Document Number: 83876 5 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 CNY117 www.vishay.com 1000 1.2 IF = 10 mA VCE = 5 V fCTR - -3 dB Frequency (kHz) CTRNorm - Normalized CTR (NS) Vishay Semiconductors Tamb = 25 C 1.0 Tamb = 0 C 0.8 Tamb = - 40 C Tamb = - 55 C 0.6 Tamb = 50 C Tamb = 75 C 0.4 Tamb = 100 C 0.2 VCC = 5 V 100 10 Tamb = 110 C 0 0.1 1 1 0.1 100 10 1 10 100 IF - Forward Current (mA) IC - Collector Current (mA) Fig. 10 - Normalized CTR (NS) vs. Forward Current Fig. 13 - CTR -3 dB Frequency vs. Collector Current 1000 IF = 10 mA VCE = 0.4 V VCE = 5 V, IF = 10 mA ton, toff - Switching Time (s) CTRNorm - Normalized CTR (sat) 1.2 Tamb = 25 C 1.0 Tamb = 0 C Tamb = - 40 C 0.8 Tamb = - 55 C 0.6 Tamb = 50 C 0.4 Tamb = 75 C Tamb = 100 C 0.2 toff 100 10 ton 1 Tamb = 110 C 0 0.1 1 10 100 0.1 0.1 1 10 100 IF - Forward Current (mA) RL - Load Resistance (k) Fig. 11 - Normalized CTR (sat) vs. Forward Current Fig. 14 - Switching Time vs. Load Resistance 0 VCE = 5 V - 20 Phase (deg) - 40 - 60 - 80 - 100 - 120 - 140 - 160 1 10 100 1000 f - Frequency (kHz) Fig. 12 - CTR Frequency vs. Phase Angle Rev. 1.9, 08-Jan-14 Document Number: 83876 6 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 CNY117 www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS in millimeters 6 5 4 6.5 0.5 1 2 3 7.3 0.5 7.62 0.3 1.1 0.1 3.5 0.3 0.5 typ. 3.3 0.5 2.8 0.5 0.26 0.5 0.1 2.54 0.25 7.62 to 9.98 22530 Option 6 Option 7 7.62 typ. 7.62 typ. 3.5 0.3 3.5 0.3 0.35 0.25 0.1 min. 0.6 min. 8 min. 2.7 min. 10.16 typ. 10.3 max. 0.76 R 0.25 2.54 1.78 8 min. 11.05 20802-35 1.52 PACKAGE MARKING (Example of CNY117-3X017T) CNY117-3 Pin 1 I.D. V YWW 25 Notes * VDE logo is only marked on option 1 parts. Option information is not marked on the part. * Tape and reel suffix (T) is not part of the package marking. Rev. 1.9, 08-Jan-14 Document Number: 83876 7 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 CNY117 www.vishay.com Vishay Semiconductors TUBE AND TAPE INFORMATION DEVICES PER TUBE TYPE UNITS/TUBE TUBES/BOX UNITS/BOX DIP-6 50 40 2000 O 1.55 0.05 2 0.1 4 0.1 1.75 0.1 7.5 0.1 16 0.3 12 0.1 0.3 0.05 22537-1 Fig. 15 - Tape and Reel Drawing, 1000 Units per Reel Rev. 1.9, 08-Jan-14 Document Number: 83876 8 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. (c) 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Vishay: CNY117-4X016 CNY117-3 CNY117-1X006 CNY117-2 CNY117-3X016 CNY117-2X007T CNY117-4X001 CNY117-3X017T CNY117-4X017T CNY117-2X017T CNY117-3X007T CNY117-1X017T CNY117-4 CNY117-2X006 CNY117-1X001 CNY117-4X007T CNY117-1X007T CNY117-2X001 CNY117-1 CNY117-3X001 CNY117-1X016 CNY117-4X006 CNY117-2X016 CNY117-3X006