ALUMINUMELECTROLYTICCAPACITORS UCQ Chip Type, For Audio Equipment Wide Temperature Range Chip type acoustic series within the wide temperature range. Applicable to automatic mounting machine fed with carrier tape. Compliant to the RoHS directive (2015/65/EU) Specifications Item Performance Characteristics Category Temperature Range -55 to +105C Rated Voltage Range 10 to 35V Rated Capacitance Range 4.7 to 680F Capacitance Tolerance 20% (120Hz, 20C) After 2 minutes' application of rated voltage at 20C, leakage current is not more than 0.01CV. Leakage Current Measurement frequency : 120Hz at 20C Tangent of loss angle (tan ) 10 0.26 Rated voltage (V) tan (MAX.) 16 0.22 25 0.16 35 0.13 Measurement frequency : 120Hz Stability at Low Temperature Rated voltage (V) Impedance ratio ZT / Z20 (MAX.) Z- 25C / Z+20C Z- 40C / Z+20C 16 2 4 10 3 5 35 2 3 25 2 3 The specifications listed at right shall be met when Capacitance change Within 30% of the initial capacitance value the capacitors are restored to 20C after the rated tan 300% or less than the initial specified value voltage is applied for 2000 hours (1000 hours for Less than or equal to the initial specified value Leakage current 4.5L ) hours at 105C. After storing the capacitors under no load at 105C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20C, they shall meet the specified values for the endurance characteristics listed above. The capacitors are kept on a hot plate for 30 seconds, Capacitance change Within 10% of the initial capacitance value which is maintained at 250C. The capacitors shall meet Less than or equal to the initial specified value tan the characteristic requirements listed at right when they Less than or equal to the initial specified value Leakage current are removed from the plate and restored to 20C. Endurance Shelf Life Resistance to soldering heat Black print on the case top. Marking Chip Type Type numbering system (Example : 35V 4.7F) (4 to 6.3) Voltage (V : 35V ) 1 Positive Plastic platform C0.2 B0.2 D0.5 A2 4.7V CQ 0.3MAX. 2 3 4 5 6 7 8 10 11 12 13 14 Taping code Size code D Configuration 4 to 6.3 810 Capacitance tolerance ( 20%) code GB GS Rated capacitance (4.7F ) H L 0.1 0.2 Rated voltage (35V ) Negative Capacitance 9 UCQ 1 V 4 R 7 MC L 1 GB 0.5MAX. Series A0.2 E A0.2 Lot No. Series name Type (8 x 10L, 10 x 10L) Plastic platform L0.5 Lot No. C0.2 Capacitance (mm) A0.2 E A0.2 0.3MAX. B0.2 A2 680A CQ Trade mark Series D0.5 Voltage (A : 10V ) 0.5MAX. Positive DxL H Negative A B C E L H 10 x 10 5 x 4.5 6.3 x 4.5 6.3 x 5.8 6.3 x 7.7 8 x 10 4 x 4.5 1.8 2.1 2.4 2.4 2.4 2.9 3.2 4.3 5.3 6.6 6.6 6.6 8.3 10.3 4.3 5.3 6.6 6.6 6.6 8.3 10.3 1.0 1.3 2.2 2.2 2.2 3.1 4.5 4.5 4.5 4.5 5.8 7.7 10 10 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.8 to 1.1 0.8 to 1.1 Rated voltage Dimension table in next page. 281 V 10 16 25 35 Code A C E V ALUMINUM ELECTROLYTIC CAPACITORS UCQ Dimensions 10 1A V Cap.(F) 4.7 Code 16 1C 15 35 1V 4 x 4.5 4 x 4.5 15 5 x 4.5 30 5 x 4.5 30 5 x 4.5 30 6.3 x 4.5 40 6.3 x 4.5 40 30 6.3 x 4.5 40 6.3 x 4.5 40 6.3 x 5.8 100 4R7 10 100 22 220 5 x 4.5 33 330 5 x 4.5 25 1E 4 x 4.5 15 30 47 470 6.3 x 4.5 40 6.3 x 4.5 40 6.3 x 5.8 100 6.3 x 7.7 120 100 101 6.3 x 5.8 100 6.3 x 5.8 100 6.3 x 7.7 120 8 x 10 250 220 221 6.3 x 7.7 120 8 x 10 250 8 x 10 250 10 x 10 400 330 331 8 x 10 250 8 x 10 250 10 x 10 400 10 x 10 400 470 471 8 x 10 250 10 x 10 400 10 x 10 400 680 681 10 x 10 400 Case size D x L (mm) Rated ripple Rated ripple current (mArms) at 105C 120Hz Frequency coefficient of rated ripple current Frequency Coefficient 50 Hz 0.70 120 Hz 1.00 300 Hz 1.17 1 kHz 1.36 10 kHz or more 1.50 Taping specifications are given in page 23. Recommended land size, soldering by reflow are given in page 18, 19. Please refer to page 3 for the minimum order quantity. 282