DMC96102 Silicon NPN epitaxial planar type Unit: mm For digital circuits DMC56102 in SSMini5 type package Features Low collector-emitter saturation voltage VCE(sat) Halogen-free / RoHS compliant (EU RoHS / UL-94 V-0 / MSL: Level 1 compliant) Marking Symbol: F5 Basic Part Number Dual DRC2124E (Common emitter) Packaging DMC961020R Embossed type (Thermo-compression sealing): 8 000 pcs / reel (standard) Absolute Maximum Ratings Ta = 25C Parameter Tr1 Tr2 Overall Symbol Rating Unit Collector-base voltage (Emitter open) VCBO 50 V Collector-emitter voltage (Base open) VCEO 50 V Collector current IC 100 mA Total power dissipation PT 125 mW Junction temperature Tj 150 C Operating ambient temperature Topr -40 to +85 C Storage temperature Tstg -55 to +150 C 4: Collector (Tr2) 5: Collector (Tr1) 1: Base (Tr1) 2: Emitter (Common) 3: Base (Tr2) Panasonic JEITA Code SSMini5-F4-B SC-107BB SOT-665 (C1) 5 (C2) 4 Tr2 Tr1 R2 R2 R1 R1 1 (B1) 2 (E) Resistance value 3 (B2) R1 22 k R2 22 k Electrical Characteristics Ta = 25C3C Parameter Symbol Conditions Min Typ Max Unit Collector-base voltage (Emitter open) VCBO IC = 10 mA, IE = 0 50 V Collector-emitter voltage (Base open) VCEO IC = 2 mA, IB = 0 50 V Collector-base cutoff current (Emitter open) ICBO VCB = 50 V, IE = 0 0.1 mA Collector-emitter cutoff current (Base open) ICEO VCE = 50 V, IB = 0 0.5 mA Emitter-base cutoff current (Collector open) IEBO VEB = 6 V, IC = 0 0.2 mA Forward current transfer ratio hFE VCE = 10 V, IC = 5 mA VCE(sat) IC = 10 mA, IB = 0.5 mA Input voltage (ON) VI(on) VCE = 0.2 V, IC = 5 mA Input voltage (OFF) VI(off) VCE = 5 V, IC = 100 A Collector-emitter saturation voltage 60 0.25 2.6 V V 0.8 V Input resistance R1 -30% 22 +30% kW Resistance ratio R1 / R2 0.8 1.0 1.2 Note) Measuring methods are based on JAPANESE INDUSTRIAL STANDARD JIS C 7030 measuring methods for transistors. Publication date: October 2013 Ver. EED 1 DMC96102 DMC96102_PT-Ta DMC96102_IC-VCE PT Ta IC VCE 400 100 75 50 300 A 80 250 A 60 200 A 150 A 40 100 A 20 25 40 80 120 160 0 200 Ambient temperature Ta (C) 50 A 0 2 4 10 VCE = 10 V 1 Ta = 85C -40C Output current IO (mA) IC / IB = 20 200 -40C 150 100 50 0 0.1 12 1 10 100 Collector current IC (mA) DMC96102_VIN-IO VIN IO 100 VO = 5 V VO = 0.2 V 1 Ta = 85C 25C 10-1 25C 250 IO VIN 10 Ta = 85C 300 DMC96102_IO-VIN VCE(sat) IC 0.1 8 350 Collector-emitter voltage VCE (V) DMC96102_VCEsat-IC 10 6 Input voltage VIN (V) 0 Forward current transfer ratio hFE IB = 350 A 100 125 Collector current IC (mA) Total power dissipation PT (mW) Ta = 25C Collector-emitter saturation voltage VCE(sat) (V) hFE IC 120 150 0 DMC96102_hFE-IC -40C 10-2 10 Ta = -40C 25C 85C 1 25C 0.01 0.1 1 10 Collector current IC (mA) 100 10-3 0 0.5 1.0 1.5 Input voltage VIN (V) Ver. EED 2.0 0.1 0.1 1 10 100 Output current IO (mA) 2 DMC96102 SSMini5-F4-B Unit: mm Land Pattern (Reference) (Unit: mm) Ver. EED 3 Request for your special attention and precautions in using the technical information and semiconductors described in this book (1) If any of the products or technical information described in this book is to be exported or provided to non-residents, the laws and regulations of the exporting country, especially, those with regard to security export control, must be observed. (2) The technical information described in this book is intended only to show the main characteristics and application circuit examples of the products. No license is granted in and to any intellectual property right or other right owned by Panasonic Corporation or any other company. Therefore, no responsibility is assumed by our company as to the infringement upon any such right owned by any other company which may arise as a result of the use of technical information described in this book. (3) The products described in this book are intended to be used for general applications (such as office equipment, communications equipment, measuring instruments and household appliances), or for specific applications as expressly stated in this book. Consult our sales staff in advance for information on the following applications: - Special applications (such as for airplanes, aerospace, automotive equipment, traffic signaling equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. It is to be understood that our company shall not be held responsible for any damage incurred as a result of or in connection with your using the products described in this book for any special application, unless our company agrees to your using the products in this book for any special application. (4) The products and product specifications described in this book are subject to change without notice for modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (5) When designing your equipment, comply with the range of absolute maximum rating and the guaranteed operating conditions (operating power supply voltage and operating environment etc.). Especially, please be careful not to exceed the range of absolute maximum rating on the transient state, such as power-on, power-off and mode-switching. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products. (6) Comply with the instructions for use in order to prevent breakdown and characteristics change due to external factors (ESD, EOS, thermal stress and mechanical stress) at the time of handling, mounting or at customer's process. When using products for which damp-proof packing is required, satisfy the conditions, such as shelf life and the elapsed time since first opening the packages. (7) This book may be not reprinted or reproduced whether wholly or partially, without the prior written permission of our company. 20100202