LHS Series Railway Flat Floating Connectors * Railway flat floating connector * Modularity mixed power, signal & coaxial contacts. * Up to 70 signal contacts. * Guiding pins. * Rack/Panel applications (norm XPF61-005) * One size only: 14 units (5.5mm) * In compliance with NF F 61-032, SNCF norm approved. Technical Characteristics ENVIRONMENTAL MATERIALS AND PLATINGS Frame Temperature range Soft Steel (Zinc coated) Side flange Polycarbonate Fire classification Insulator Polycarbonate Salt spray test Pin & socket body Au/Ni Floating eyelets Following NF F 61-032 par. 11.4.6 Vibration Withstanding Copper alloy, Au/Ni Pin 96 hours Acid withstanding Brass, Au/Ni Socket wires - 40 C to 100 C Exigence 2 following NF F 16-102 Brass (Ni plated) 5 g /25 to 250 Hz Insulator mechanichal resistance 1000 N Max torque for auto threading screws 75 Ncm ELECTRICAL CHARACTERISTICS Contact O O 1.50 O 2.50 O 3.50 Creepage distance 1.85 mm 2.25 mm 4.05 mm Clearance distance 1.25 mm 3.40 mm 5.40 mm 8A 16 A 25 A Working current 5.103 M Insulation resistance 2.50 m 1.00 m 0.80 m Dielectric withstanding voltage 1500 Vrms 2000 Vrms 3000 Vrms O 1.50 O 2.50 O 3.50 110 V 220 V 220 V Contact holding back in the module 40 N 50 N 70 N 4.90 g Contact resistance Contact O Voltage rating Maxi male contact mass 1.10 g 2.90 g Maxi female contact mass 0.70 g 1.60 g 2.70 g IF/SF* (Max value) 1.60N 9.00N 10.00N *IF/SF: Insertion and separation force according to NF F 61-032 SEPTEMBER 2006 103 LHS Series Ordering information L H S --- -- -- 14 SERIES MODEL S MARKED FRAME* LAYOUT(consult the facyory) Ex. : 102 Always receptacle P/N to use Layouts included L/RH Normalized 102 104 108 120 130 147 Other 101 to 1-- Layouts included L/ZH Normalized 302 320 Other 301 to 3-- PART - POLARITY 01 Plug delivered without contact 11** Male plug delivered with contacts 02 Receptacle delivered without contact 20** Female receptacle delivered with contacts TERMINATION STYLES 00 Wthout contact 51 Wire wrap 0.6 20 Crimp termination 56 Wire wrap 1 30 Straight termination 62 Post termination 14 PITCH NUMBER * Only normalized layouts are marked with NF N 61-032 ** Only for non normalized layouts 104 SEPTEMBER 2006 LHS Series Plug & receptacle dimensions 125 Maxi J H G F E D C B A 98 15 32 36 2 holes o 4.20 Floating 1.25 14 x 5.50 pitches = 77 105 10 30 Mated A 10 Mounting side A Maxi : 20.30 mini : 19.30 Mounting side 125 Maxi 15 32 36 98 J H G F E D C B A 2 holes o 4.20 Floating 1.25 14 x 5.50 pitches = 77 105 Dimensions are in mm SEPTEMBER 2006 105 LHS Series Mounting exemple with L/RHA, L/UH, L/VM and L/VF modules Receptacle cabling side view D C B A 1 2 2 2 1 1 1 1 4 3 2 1 J 1 2 5 H 1 3 J 1 3 H 2 3 G 3 3 G 2 1 1 1 1 2 2 2 2 3 3 3 3 F 2 F 2 E 4 E 5 Inviolability sealing (drop of painting) C D B A Plug cabling side view 1 1 1 2 1 3 4 2 2 2 5 2 HYPERTAC Manufacturer 3 4 Code date 01 43 1 5 Layout identification* 04 NF F 61-032 Standard* Dimensions are in mm 106 SEPTEMBER 2006 LHS Series Contacts - crimp terminations Males Females 7.15 7.90 7.15 9.10 25.95 O 2.75 O 1.80 O 3.40 O 3.00 O 1.50 O 3.00 AWG 24-22-20-18-16-14 O 2.75 O 1.80 O 3.40 O 1.50 O 3.00 Contacts O 1.50 18.15 Ref: 0150 682-20-G1 Ref: 0150 761-20-OG Contacts O 2.50* 12 7.50 12 OA OB O 2.50 8 OA O 2.50 8 Ref: 0250 181-22-OG Ref: 0250 201-23-OG OB 15.50 Ref: 0250 172-22-G1 Ref: 0250 202-23-G1 Contacts O 3.50* 15.50 OA OB 8 5.90 9.50 9.50 19.50 27.50 Ref: 0350 111-24-OG Ref: 0350 121-25-OG Ref: 0350 131-26-OG Ref: 0350 251-23-OG O 7.00 O 6.60 OB O 3.50 8 OA O 7.00 O 6.60 O 3.50 9 OA OB *AWG 0250 181-22-OG 0250 172-22-G1 1.95 3.10 16-14 0250 201-23-OG 0250 202-23-G1 1.50 3.10 22-20-18-16 0350 111-24-OG 0350 112-24-G1 2.10 4.10 14-13 0350 121-25-OG 0350 122-25-G1 1.95 3.10 16-14 0350 131-26-OG 0350 132-26-G1 1.50 3.10 22-17 0350 251-23-OG 0350 302-23-G1 4.55 5.65 8 Reference Ref: 0350 112-24-G1 Ref: 0350 122-25-G1 Ref: 0350 132-26-G1 Ref: 0350 302-23-G1 O 2.50 O 3.50 Dimensions are in mm SEPTEMBER 2006 107 LHS Series Contacts O 1.50 - Wire wrap termination 17.50 Females 9.70 15 18.80 O 1.50 0.60 O1.50 18.80 15 Ref: 0151 132-51-G1 Ref: 0151 131-51-OG 40 32.2 9.7 8.3 17.50 1 1.5 8.6 1 1.5 20 (useful) 3.3 1 20 (useful) 8.6 1 7.9 1.5 O1.50 0.60 Males Ref: 0151 151-56-OG Ref: 0151 152-56-G1 Contact O 1.50 - Post termination 40 32.20 O 1.50 21.50 3.30 O 1.50 20 (useful) 9.60 9.70 1.60 x 0.79 21.50 1.60 x 0.79 17.50 20 (useful) O 2.00 O 2.00 8.60 8.30 8.60 Ref: 0150 862-62-G1 Ref: 0150 861-62-OG Coaxial contacts 24 5.90 O 1.70 7.90 6.20 x 5.50 O 2.40 5.90 O 3.65 O 2.40 O 1.70 O 3.65 6 O 5.23 Max 28.80 13.80 6.20 x 5.50 Ref: 0370 032-XB-U1 Ref: 0370 031-XB-U1 TECHNICAL CHARACTERISTICS Impedance cable KX22A (RG316) : 50 , Curent rating 3A Contact resistance Internal 10 milli Insulation resistance > 5.103 M (500VDC) Temperature range -40 C + 100 C Contact life cycle > 5000 cable RG179B/U : 75 External 0.8 milli Standing wave ratio up to 1.2 (500 MHz) Dimensions are in mm 108 SEPTEMBER 2006 LHS Series Modules 5 x O 1.50 L/RH L/ZH 25 22 9 5.50 2 22 6.5 12 13.5 22 5.50 4 29 4 29 Ref: L -- 515 00 00 ZHA Coudee 90 3 x O 2.50 2 x O 3.50 L/SH L/UH 22 12 13.5 12 22 13 29 9 1 5.6 5.6 29 5.6 7.6 11 2 7.6 3 8.25 6.5 Ref: L-- 325 00 00 SH 13.5 Ref: L-- 515 00 00 RHABent 9.5 Ref: L-- 235 00 00 UH Coudee 90 Dimensions are in mm SEPTEMBER 2006 109 LHS Series Modules Modules equipped with contacts for KX15 coax cable L/VM L/VF 29 22 27 32 9 12 3.50 12 O 3.65 O 10 O 10 8.80 11 11 11 11 8.80 22 22 29 29 Ref: L-- 1CX 11 40 VMBent Ref: L -- 1CX 20 40 VF Coudee 90 Socket wires TECHNICAL CHARACTERISTICS Impedance 50 Curent rating 2A Contact resistance Internal 10 milli Insulation resistance > 5.104 M (500 VDC) Copper alloy, Au/Ni Dielectric withstanding voltage internal 1000 Vrms external 4800 Vrms External 1 milli Temperature range -40 C + 100 C Module pitches number 4 as 22 mm Recommended cable KX15 Dimensions are in mm 110 SEPTEMBER 2006 LHS Series Layouts 3 3 3 2 2 2 1 1 J E 1 H D 1 G 1 F 1 5 4 4 3 3 2 2 1 1 5 3 1 Ref: 217/317 5 5 3 4 2 3 3 1 1 3 1 1 3 J 5 5 5 5 4 4 4 4 4 3 3 3 3 3 3 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 3 3 2 G H J K L M 3 3 2 2 1 5 5 5 4 4 4 3 3 3 3 2 2 2 2 1 1 1 1 5 3 3 1 2 1 1 3 3 3 2 2 2 1 1 1 1 3 3 2 2 5 3 3 2 2 1 5 modules L/ZH 6 modules L/SH 1 1 1 3 1 1 3 1 1 2 2 2 2 1 1 3 modules L/ZH 6 modules L/SH 1 module L/UH 3 3 3 3 3 3 2 2 2 2 2 2 1 1 1 1 Ref: 227/327 1 4 3 2 1 2 1 5 4 4 3 2 4 modules L/ZH 4 modules L/SH 2 modules L/UH Ref: 226/326 5 2 1 3 2 1 2 1 2 4 2 2 3 modules L/ZH 2 modules L/SH 4 modules L/UH Ref: 225/325 1 2 11 modules L/ZH 12 modules L/SH 1 4 2 K 5 4 3 2 N 5 4 3 2 5 3 J 5 4 3 2 Ref: 224/324 5 H 5 4 3 J 1 G 5 4 2 H 1 F 5 3 J 1 1 1 K 2 N M L E 2 K F H E G J D 2 2 2 1 K E 2 1 3 3 F D 3 2 1 2 5 D B A B 4 3 2 1 C 5 4 4 2 2 A N 5 3 2 4 Ref: 223/323 4 3 1 5 1 4 1 4 2 2 2 1 1 3 2 5 8 modules L/ZH 4 modules L/SH 4 3 2 3 2 4 2 2 modules L/ZH 8 modules L/SH J 1 3 2 1 K 1 4 3 1 G L 1 1 5 4 1 3 1 5 1 3 F J K 1 3 2 1 5 4 E H 2 H M G 3 2 L K F 3 2 G L J E 4 3 2 C J K H D D B A 5 2 modules L/ZH 8 modules L/SH 5 4 3 2 1 5 1 1 2 2 1 1 J 3 2 5 4 3 Ref: 216/316 A 3 2 K 3 2 1 5 4 1 4 4 modules L/ZH 5 modules L/UH 5 2 1 H 8 modules L/ZH 4 modules L/SH 1 3 2 B 1 A 1 L 2 M 3 2 J 4 3 2 K 5 4 3 2 B J H G 5 4 3 2 H 5 4 3 2 1 C F 5 4 3 2 1 5 2 1 F E 5 4 3 2 F 5 4 3 G 5 4 1 1 3 2 3 4 1 3 2 4 3 2 1 3 2 5 5 2 4 3 2 1 Ref: 215/315 5 1 5 2 4 3 2 1 2 1 5 3 3 2 1 1 7 modules L/ZH 2 modules L/SH 2 modules L/UH 2 4 3 2 1 3 2 H 1 3 1 1 3 2 H 2 1 1 1 1 5 2 1 3 1 2 1 3 2 2 4 3 2 1 Ref: 213/313 2 G C 1 5 2 4 3 2 1 1 4 1 5 3 4 11 modules L/ZH 12 modules L/SH 2 1 2 Ref: 222/322 5 3 2 3 3 2 1 11 modules L/ZH 12 modules L/SH G 1 F 1 3 1 G H 1 5 E D 1 E D C 1 4 1 F 2 3 C 1 5 1 G 2 2 B 1 3 1 F 2 3 Ref: 208/308 1 2 1 E 2 2 1 A 2 2 A J 3 4 1 1 D C B A 4 3 1 module L/ZH 6 modules L/SH 2 modules L/UH Ref: 207/307 1 1 D 1 Ref: 206/306 3 1 C 1 1 1 C 1 1 2 3 1 1 3 2 5 2 B 5 4 3 1 4 A 5 4 3 1 F G 3 2 5 5 4 3 1 Ref: 220/320 1 H F 3 2 3 4 3 2 J E 3 2 2 5 4 3 2 H D 3 2 3 5 4 3 2 G C 3 2 2 5 4 3 2 F B 3 2 1 5 4 3 modules L/ZH 6 modules L/SH 1 module L/UH Ref: 205/305 3 5 4 3 2 G 1 2 5 4 3 2 J 1 3 5 4 3 2 K 1 2 5 4 3 H 1 5 1 F B 1 1 5 4 2 B 1 1 5 3 A 3 2 J 3 2 K 3 2 1 E A H 3 2 2 2 1 B G 3 2 2 E N F 3 2 2 3 8 modules L/ZH 4 modules L/SH Ref: 212/312 2 C M E 2 modules L/ZH 4 modules L/SH 3 modules L/UH 2 4 4 1 1 2 D L 1 2 C K 1 2 D J 1 1 2 E H 1 2 1 2 5 3 2 5 3 2 3 2 Ref: 204/304 2 5 2 3 2 D G 3 2 1 4 3 D F 3 2 1 5 4 3 C E 3 2 2 1 Ref: 211/311 4 D C B 3 2 2 5 4 3 D D 1 1 1 5 4 3 C C 2 2 1 5 4 3 C 1 5 4 3 C 2 1 5 4 3 B 2 1 5 4 3 A 2 1 3 5 4 B 2 1 4 3 1 1 3 modules L/ZH 6 modules L/SH 1 module L/UH 5 A 2 1 5 4 3 2 3 1 3 B 2 1 5 1 1 4 A 2 1 3 2 1 5 1 5 2 3 B 2 1 3 1 1 A 2 1 4 3 3 2 2 4 B 2 1 5 4 1 3 2 4 3 5 A 2 1 5 5 2 B 2 1 2 3 3 2 4 3 Ref: 219/319 A 2 1 3 4 L 2 1 5 modules L/ZH 6 modules L/SH 5 3 2 1 1 M 3 2 N 4 3 3 M 5 4 3 4 L 5 4 3 5 K 5 4 3 1 3 2 J 5 4 3 1 3 2 L 5 4 3 2 M 5 4 3 1 3 2 4 2 1 L 5 4 3 3 2 5 3 2 K 5 4 3 4 3 K 5 4 3 5 4 J 5 4 3 1 1 1 5 H 5 4 2 1 1 Ref: 210/310 5 12 modules L/ZH 11 module L/UH 3 2 3 G 1 3 1 5 G 1 4 1 A 1 5 2 A 1 3 3 1 3 2 4 5 2 3 2 5 Ref: 203/303 4 3 2 1 3 2 11 modules L/ZH 12 modules L/SH 2 1 P 1 2 L 1 2 1 2 B A 1 1 2 1 4 3 14 modules L/ZH Ref:202/302 2 2 1 4 N 1 2 5 M 1 2 K 1 2 J 1 2 H 1 E 1 2 F 2 G 2 D A 1 2 B 2 C 2 1 G 3 1 F 4 3 1 F 5 4 3 1 E 5 4 3 1 F 5 4 3 1 E 5 4 3 2 D 5 4 3 3 2 E 5 4 3 4 3 2 D 5 4 3 5 4 3 2 E 5 4 3 5 4 3 2 D 5 4 3 5 4 3 2 E 5 4 3 5 4 3 2 C 5 4 3 C 5 4 3 C 5 4 B 5 5 4 3 2 Ref: 209/309 A J 7 modules L/ZH 2 modules L/SH 2 modules L/UH Ref: 201/301 1 5 4 3 2 J 1 5 4 3 H 1 5 4 F 1 1 1 5 H 1 L 1 1 3 2 E 2 G 3 2 D 4 3 2 B 5 4 3 2 C 5 4 3 A 5 4 2 H 1 5 2 3 2 1 3 4 2 3 2 5 3 4 3 F 1 5 2 4 1 G 1 5 2 E 2 D 3 2 B 4 3 C 5 4 A 5 K Layouts including O 1.50 mm contacts are equipped with L/ZH modules. 1 module L/ZH 6 modules L/SH 2 modules L/UH Notes Only receptacle layouts are represented Termination side view Dimensions are in mm SEPTEMBER 2006 111 LHS Series Layouts 5 5 5 5 5 5 5 4 4 4 4 4 4 4 4 3 3 3 3 3 3 3 3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 C D E F G H J K L M B C D E F G 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1 F G H J K B C D 1 1 1 1 1 1 1 3 2 1 1 8 modules L/ZH 4 modules L/SH 5 5 5 5 5 5 4 4 4 4 4 4 4 3 3 3 3 3 3 3 2 2 2 2 2 2 2 1 1 1 1 1 1 1 F G H J 2 2 1 1 L 5 7 modules L/ZH 2 modules L/SH 2 modules L/UH 4 3 3 2 2 2 1 1 1 1 1 1 1 1 1 E F G H J K 5 5 5 5 5 4 4 4 4 4 3 3 3 3 3 2 2 2 2 2 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 B C D F G K L J 5 5 5 5 5 4 4 4 4 4 4 3 3 3 3 3 3 3 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1 B D E F G J K 2 2 1 1 L 5 4 3 2 M 5 4 3 2 H 5 4 3 5 5 5 5 5 5 4 4 4 4 4 4 4 3 3 3 3 3 3 3 2 2 2 2 2 2 2 1 1 1 1 1 1 1 B D E F H 10 modules L/ZH 12 modules L/UH Ref: 247/347 G A 5 4 C M 5 A L 1 12 modules L/ZH 11 module L/UH Ref: 246/346 Ref: 250/350 2 N 3 2 M 4 3 2 H 5 4 3 2 E 5 4 3 2 A 5 4 3 2 5 3 3 2 2 1 1 3 5 5 5 5 5 4 4 4 4 4 3 3 3 3 3 2 2 2 2 2 1 1 1 1 1 3 3 3 3 6 modules L/ZH 2 modules L/V- 3 2 2 2 2 2 2 1 1 1 1 1 1 5 modules L/ZH 6 modules L/SH Ref: 243/343 Ref: 245/345 5 4 3 2 9 modules L/ZH 2 modules L/SH 1 module L/UH Ref: 242/342 J 1 3 2 5 4 3 2 F 2 5 4 3 2 G 3 2 M 4 3 2 K 5 4 3 2 J 5 4 3 2 H 5 4 3 2 G 5 4 3 2 F 5 4 3 2 E 5 4 3 D 5 4 5 4 3 2 3 5 3 2 3 3 3 1 1 1 5 3 4 2 3 2 2 2 2 1 5 4 4 2 F 9 modules L/ZH 2 modules L/SH 1 module L/UH 5 4 3 2 G 1 5 4 3 2 D 1 5 4 3 C 1 5 4 2 E 1 5 3 D 1 1 4 1 E 1 2 1 5 2 D 1 2 1 B 2 A 3 2 2 1 B 4 3 2 A 5 4 3 2 2 1 C 5 4 3 2 5 4 3 2 4 modules L/ZH 5 modules L/UH B 5 4 3 2 A 5 4 3 2 2 Ref: 241/341 C 5 4 3 M 1 5 4 J 1 5 L 3 K 6 modules L/ZH 4 modules L/UH 5 4 3 2 J 2 5 4 3 2 M 2 5 4 3 2 L 2 5 4 3 2 1 1 1 M 2 H 3 2 1 L 4 3 1 K 5 4 3 1 L 5 4 3 1 G 5 4 3 3 2 F 5 4 3 3 2 E 5 4 3 A 5 4 E D C 5 3 3 2 5 4 3 8 modules L/ZH 4 modules L/SH Ref: 240/340 4 3 2 5 4 M 5 4 3 2 5 1 L 5 4 3 2 3 1 K 5 4 3 2 H 5 4 3 A 5 4 4 3 2 1 module L/ZH 2 modules L/SH 5 modules L/UH 5 2 K 1 3 2 5 C 1 Ref: 239/339 5 1 H 1 3 1 G 1 2 3 3 2 2 3 2 3 2 1 2 4 1 3 2 F 2 4 1 L F H J 2 5 1 8 modules L/ZH 4 modules L/SH 5 2 J E G 1 2 10 modules L/ZH 2 modules L/UH 3 2 K D 1 1 J H G F E 1 3 5 Ref: 236/336 1 4 E 1 B A 1 1 5 D 3 2 1 2 C 3 1 3 Ref: 235/335 2 1 4 L C 1 B A 1 2 5 C 3 2 3 2 2 K B A 3 4 3 2 3 Ref: 234/334 2 5 4 3 2 4 H 1 5 4 3 2 1 G 1 2 1 F 2 5 4 3 2 5 E 3 5 4 3 2 2 D 4 2 5 4 3 3 B A 5 3 5 4 2 4 1 4 5 3 2 3 2 7 modules L/ZH 2 modules L/SH 2 modules L/UH 5 2 5 1 3 4 modules L/ZH 4 modules L/SH 1 module L/V- Ref: 233/333 1 1 Ref: 238/338 4 2 1 2 1 5 3 2 1 1 4 1 4 1 1 K 1 1 E 2 1 1 H 2 2 5 3 2 1 3 3 2 Ref: 237/337 2 5 3 2 1 1 2 Ref: 232/332 2 1 4 3 2 J 3 B 1 A 2 1 1 5 4 3 2 J 4 3 Ref: 231/331 2 2 5 4 3 2 H 5 4 D 1 5 C 1 B 3 2 A 3 3 2 6 modules L/ZH 4 modules L/SH 1 module L/UH Ref: 230/330 2 4 3 2 5 4 3 2 F 1 5 4 3 5 4 3 2 H 1 5 4 5 4 3 G E 1 5 5 4 D D 3 2 1 B 1 3 2 L 1 3 2 2 1 1 K 1 1 H J 2 G 3 2 1 J D 4 3 2 F 5 4 3 E 5 4 B A 1 5 C 3 1 2 modules L/ZH 8 modules L/SH Ref: 229/329 2 1 K B 1 H 1 F 1 2 3 2 G 1 C A 1 5 5 B 3 2 E 3 2 2 D 3 2 4 3 C 3 2 4 C 5 A 3 2 B 3 2 A 3 2 A 3 2 C Layouts including O 1.50 mm contacts are equipped with L/ZH modules. 8 modules L/ZH 4 modules L/SH Notes Only receptacle layouts are represented termination side view Dimensions are in mm 112 SEPTEMBER 2006 LHS Series Panel cut-out Receptacle panel cutting 105 0.1 B 93 0.1 A 0.1 B 0.1 A 35 15 A 2 holes O 4.20 Guiding pin pass B 98 0.1 B Plug panel cutting 0.1 B 0.1 A 35 15 0.1 A 105 0.1 B 93 2 holes O 4.20 A B Dimensions are in mm SEPTEMBER 2006 113 LHS Series Crimping tools Contact part number 0150 682-20-G1 0150 761-20-OG Crimp tool AWG ASTRO TOOL TGV 101 24 22 20 18 16 14 0.22 0.34 0.60 0.93 1.34 1.91 DANIELS FT8 24 22 20 18 16 14 0.22 0.34 0.60 0.93 1.34 1.91 ASTRO TOOL MS 3191/1 22 20 18 16 14 0.34 0.60 0.93 1.34 1.91 ASTRO TOOL TGV 101 16 15 15 14 14 1.34 1.50 1.82 1.91 2.00 DANIELS FT8 16 15 15 14 14 1.34 1.5 1.82 1.91 2.00 ASTRO TOOL TGV 101 22 20 18 18 16 0.34 0.60 0.93 1.00 1.34 DANIELS FT8 22 20 18 18 16 0.34 0.60 0.93 1.00 1.34 DANIELS M317 14 14 13 1.91 2.00 2.50 ASTRO TOOL TGV 515 14 14 13 1.91 2.00 2.50 DANIELS M317 16 15 14 14 ASTRO TOOL TGV 515 0250 181-22-OG 0250 172-22-G1 0250 201-23-OG 0250 202-23-G1 Positioner Tool turret ASTRO TOOL TGV 202 red DANIELS SH 463 red SS.0150000002 HYPERTAC Selector position 2 3 4 5 6 7 2 3 4 5 6 7 Without ASTRO TOOL TGV 202 blue DANIELS SH 463 blue ASTRO TOOL TGV 202 blue DANIELS SH 463 blue 6 6 7 7 7 6 6 7 7 7 5 6 6 6 6 5 6 6 6 6 DANIELS TP 805 3 3 4 ASTRO TOOL TGV 503 3 3 4 1.34 1.50 1.91 2.00 DANIELS TP 805 2 2 3 3 16 15 14 14 1.34 1.50 1.91 2.00 ASTRO TOOL TGV 503 2 2 3 3 DANIELS M317 22 20 18 18 0.38 0.60 0.93 1.00 DANIELS TP 805 1 1 2 2 ASTRO TOOL TGV 515 22 20 18 18 0.38 0.60 0.93 1.00 ASTRO TOOL TGV 503 1 1 2 2 ASTRO TOOL TGV 515 8 8.98 M22520/1,05 4 DANIELS M300 BT 8 8.98 M22520/1,05 4 0350 111-24-OG 0350 112-24-G1 0350 121-25-OG 0350 122-25-G1 0350 131-26-OG 0350 132-26-G1 0350 251-23-OG 0350 302-23-G1 Wire cross section Without Without Without Dimensions are in mm 114 SEPTEMBER 2006 LHS Series Tools - Insertion and extraction tools Contact O MALES FEMALES Part number Part number Insertion tool S_059 Extracting tool (1) SM-0150000002 (2) 1.50 0150 761-20-OG 0150 682-20-G1 S__ 072 SM-0150000003 (3) SM-0150000000 (4) 0250 181-22-OG 0250 172-22-G1 0250 201-23-OG 0250 202-23-G1 0350 111-24-OG 0350 112-24-G1 0350 121-25-OG 0350 122-25-G1 0350 131-26-OG 0350 132-26-G1 0350 251-23-OG 0350 302-23-G1 2.50 3.50 SE-0250000001 S__ 078 SE-0350000001 S__ 083(5) (1) straight tool (2) unwedge tool (3) bent tool (4) 3 tool kit (5) tool for O 1.50, 2.50 et 3.50 contacts Dimensions are in mm SEPTEMBER 2006 115