http://www.fujisemi.com PA905C6RR FUJI Diode Low-Loss Fast Recovery Diode Maximum Rating and Characteristics Maximum ratings (at Ta=25C unless otherwise specified.) Item Symbols Repetitive peak reverse voltage Average output current Non-repetitive forward surge current** Operating junction temperature Storage temperature Conditions Ratings Units VRRM - 600 V Io 50Hz Square wave duty =1/2 Tc = 106C 20 * A Sine wave, 10ms 1shot 100 A Tj - 150 C Tstg - -40 to +150 C Conditions Maximum Units 1.7 V IFSM Note* Out put current of center tap full wave connection. Note** Rating per element Electrical characteristics Item Forward voltage*** (at Ta=25C unless otherwise specified.) Symbols VF IF = 10 A Reverse current*** IR VR =VRRM 100 A Reverse recovery time*** trr IF =0.1A, IR =0.2A, Irec =0.05A 0.05 S Junction to case 1.2 C/W Conditions Maximum Units Recommended torque 0.4 to 0.6 N*m - 5.5 g Thermal resistance Rth(j-c) Note*** Rating per element Mechanical characteristics Item Mounting torque Approximate mass 1 PA905C6RR FUJI Diode http://www.fujisemi.com Outline Drawings [mm] 2 PA905C6RR FUJI Diode http://www.fujisemi.com Forward Characteristic (typ.) Reverse Characteristic 100 (typ.) 102 Tj=150 Tj=125 Tj=150 Tj=100 101 Tj=125 Reverse Current 10 1 Tj=100 100 Tj= 25 R Forward Current Tj=25 10-1 10-2 0.1 0.0 0 0.5 1.0 100 R Forward Voltage Forward Power Dissipation (max.) 360 500 600 700 360 0.028 26 0.026 I0 VR 0.024 Square wave =60 24 400 0.030 28 22 0.022 DC 0.020 Power Dissipation 20 Square wave =120 Sine wave =180 Square wave =180 18 16 DC 14 Reverse 12 10 0.018 0.016 0.014 0.012 =180 0.010 0.008 8 Forward Power Dissipation 300 Reverse Voltage Reverse Power Dissipation (max.) 30 200 1.5 6 0.006 0.004 4 2 0.002 Per 1element 0.000 0 0 2 4 6 8 10 Average Forward Current 12 14 0 16 100 200 3 300 400 Reverse Voltage 500 600 700 PA905C6RR FUJI Diode http://www.fujisemi.com Current Derating Junction Capacitance Characteristic (typ.) (Io-Tc) (max.) 160 150 140 100 DC 120 Junction Capacitance (pF) 130 Square wave =180 Sine wave =180 100 Square wave =120 90 Cj Case Temperature 110 Square wave =60 80 70 60 50 0 5 10 15 Average Output Current 10 20 10 VR :Conduction angle of forward current for each rectifier element Io:Output current of center-tap full wave connection Surge Capability (max.) FSM Peak Half - Wave Current 100 10 1 10 Number of Cycles at 50Hz 4 100 Reverse Voltage (V) PA905C6RR FUJI Diode http://www.fujisemi.com Transient Thermal Impedance 10 (max.) 2 Transient Thermal Impedance 101 Rth j-c:1.2/W 100 10-1 10-3 10-2 10-1 100 Time 5 101 102 PA905C6RR FUJI Diode http://www.fujisemi.com WARNING 1. This Catalog contains the product specifications, characteristics, data, materials, and structures as of March 2010. The contents are subject to change without notice for specification changes or other reasons. When using a product listed in this Catalog, be sure to obtain the latest specifications. 2. A ll applications described in this Catalog exemplify the use of Fuji's products for your reference only. No right or license, either express or implied, under any patent, copyright, trade secret or other intellectual property right owned by Fuji Electric Systems Co., Ltd. is (or shall be deemed) granted. Fuji Electric Systems Co., Ltd. makes no representation or warranty, whether express or implied, relating to the infringement or alleged infringement of other's intellectual property rights which may arise from the use of the applications described herein. 3. A lthough Fuji Electric Systems Co., Ltd. is enhancing product quality and reliability, a small percentage of semiconductor products may become faulty. When using Fuji Electric semiconductor products in your equipment, you are requested to take adequate safety measures to prevent the equipment from causing a physical injury, fire, or other problem if any of the products become faulty. It is recommended to make your design fail-safe, flame retardant, and free of malfunction. 4. T he products introduced in this Catalog are intended for use in the following electronic and electrical equipment which has normal reliability requirements. * Computers * OA equipment * Communications equipment (terminal devices) * Measurement equipment * Machine tools * Audiovisual equipment * Electrical home appliances * Personal equipment * Industrial robots etc. 5. If you need to use a product in this Catalog for equipment requiring higher reliability than normal, such as for the equipment listed below, it is imperative to contact Fuji Electric Systems Co., Ltd. to obtain prior approval. When using these products for such equipment, take adequate measures such as a backup system to prevent the equipment from malfunctioning even if a Fuji's product incorporated in the equipment becomes faulty. * Transportation equipment (mounted on cars and ships) * Trunk communications equipment * Traffic-signal control equipment * Gas leakage detectors with an auto-shut-off feature * Emergency equipment for responding to disasters and anti-burglary devices * Safety devices * Medical equipment 6. Do not use products in this Catalog for the equipment requiring strict reliability such as the following and equivalents to strategic equipment (without limitation). * Space equipment * Aeronautic equipment * Nuclear control equipment * Submarine repeater equipment 7. Copyright (c)1996-2008 by Fuji Electric Systems Co., Ltd. All rights reserved. No part of this Catalog may be reproduced in any form or by any means without the express permission of Fuji Electric Systems Co., Ltd. 8. If you have any question about any portion in this Catalog, ask Fuji Electric Systems Co., Ltd. or its sales agents before using the product. Neither Fuji Electric Systems Co., Ltd. nor its agents shall be liable for any injury caused by any use of the products not in accordance with instructions set forth herein. 6 http://store.iiic.cc/