Is Now Part of To learn more about ON Semiconductor, please visit our website at www.onsemi.com Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers will need to change in order to meet ON Semiconductor's system requirements. Since the ON Semiconductor product management systems do not have the ability to manage part nomenclature that utilizes an underscore (_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please email any questions regarding the system integration to Fairchild_questions@onsemi.com. ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor's product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. "Typical" parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. FDD6612A/FDU6612A 30V N-Channel PowerTrench MOSFET General Description Features This N-Channel MOSFET has been designed specifically to improve the overall efficiency of DC/DC converters using either synchronous or conventional switching PWM controllers. It has been optimized for low gate charge, low RDS( ON) , fast switching speed and extremely low RDS(ON) in a small package. * 30 A, 30 V RDS(ON) = 20 m @ VGS = 10 V RDS(ON) = 28 m @ VGS = 4.5 V * Low gate charge * Fast Switching Applications * High performance trench technology for extremely low RDS(ON) * DC/DC converter * Motor Drives D D G S I-PAK (TO-251AA) D-PAK TO-252 (TO-252) G G D S Absolute Maximum Ratings Symbol S TA=25oC unless otherwise noted Ratings Units VDSS Drain-Source Voltage 30 V VGSS Gate-Source Voltage 20 V ID Continuous Drain Current @TC=25C (Note 3) 30 A @TA=25C (Note 1a) 9.5 Pulsed (Note 1a) 60 PD Parameter Power Dissipation TJ, TSTG @TC=25C (Note 1) 36 @TA=25C (Note 1a) 2.8 @TA=25C (Note 1b) W 1.3 Operating and Storage Junction Temperature Range -55 to +175 C Thermal Characteristics RJC Thermal Resistance, Junction-to-Case (Note 1) 3.9 C/W RJA Thermal Resistance, Junction-to-Ambient (Note 1a) 45 C/W RJA Thermal Resistance, Junction-to-Ambient (Note 1b) 96 C/W Package Marking and Ordering Information Device Marking Device Package Reel Size Tape width Quantity FDD6612A FDD6612A D-PAK (TO-252) 13'' 16mm 2500 units FDU6612A FDU6612A I-PAK (TO-251) Tube N/A 75 2004 Fairchild Semiconductor Corporation FDD6612A/FDU6612A Rev. 4.1 FDD6612A/FDU6612A March 2015 Symbol TA = 25C unless otherwise noted Parameter Test Conditions Min Typ Max Units Drain-Source Avalanche Ratings (Note 2) WDSS Drain-Source Avalanche Energy IAR Drain-Source Avalanche Current Single Pulse, VDD = 27 V, ID=10 A 51 mJ 10 A Off Characteristics ID = 250 A BVDSS BVDSS TJ IDSS Drain-Source Breakdown Voltage Breakdown Voltage Temperature Coefficient Zero Gate Voltage Drain Current VGS = 0 V, VDS = 24 V, VGS = 0 V 1 A IGSS Gate-Body Leakage VGS = 20 V, VDS = 0 V 100 nA On Characteristics VGS(th) VGS(th) TJ RDS(on) gFS 30 ID = 250 A,Referenced to 25C V 25 mV/C (Note 2) Gate Threshold Voltage Gate Threshold Voltage Temperature Coefficient VDS = VGS, ID = 250 A ID = 250 A,Referenced to 25C Static Drain-Source On-Resistance VGS = 10 V, VGS = 4.5 V, VGS = 10 V, VDS = 5 V, ID = 9.5 A ID = 8 A ID = 9.5 A, TJ=125C ID = 9.5 A VDS = 15 V, f = 1.0 MHz V GS = 0 V, VGS = 15 Mv, f = 1.0 MHz Forward Transconductance 1 2.0 -5.1 3 15 20 23 20 28 33 V mV/C m 28 S 660 pF 170 pF 90 pF 2.3 Dynamic Characteristics Ciss Input Capacitance Coss Output Capacitance Crss Reverse Transfer Capacitance RG Gate Resistance Switching Characteristics (Note 2) td(on) Turn-On Delay Time 9 18 ns tr Turn-On Rise Time 5 10 ns td(off) Turn-Off Delay Time 24 38 ns tf Turn-Off Fall Time 4 8 ns Qg Total Gate Charge 6.7 9.4 nC Qgs Gate-Source Charge Qgd Gate-Drain Charge VDD = 15 V, VGS = 10 V, VDS = 15 V, VGS = 5 V ID = 1 A, RGEN = 6 ID = 9.5 A, 2.1 nC 2.7 nC FDD6612A/FDU6612A Rev. 4.1 FDD6612A/FDU6612A Electrical Characteristics Symbol TA = 25C unless otherwise noted Parameter Test Conditions Min Typ Max Units Drain-Source Diode Characteristics and Maximum Ratings IS Maximum Continuous Drain-Source Diode Forward Current VSD trr Drain-Source Diode Forward Voltage Diode Reverse Recovery Time Qrr Diode Reverse Recovery Charge VGS = 0 V, IS = 2.3 A IF = 9.5 A, diF/dt = 100 A/s (Note 2) 0.8 2.3 A 1.2 V 20 nS 10 nC Notes: 1. RJA is the sum of the junction-to-case and case-to-ambient thermal resistance where the case thermal reference is defined as the solder mounting surface of the drain pins. RJC is guaranteed by design while RCA is determined by the user's board design. a) RJA = 45C/W when mounted on a 1in2 pad of 2 oz copper b) RJA = 96C/W when mounted on a minimum pad. Scale 1 : 1 on letter size paper 2. Pulse Test: Pulse Width < 300s, Duty Cycle < 2.0% 3. Maximum current is calculated as: PD R DS(ON) where PD is maximum power dissipation at TC = 25C and RDS(on) is at TJ(max) and VGS = 10V. Package current limitation is 21A FDD6612A/FDU6612A Rev. 4.1 FDD6612A/FDU6612A Electrical Characteristics FDD6612A/FDU6612A Typical Characteristics 2 60 5.0V ID, DRAIN CURRENT (A) 50 VGS = 3.5V RDS(ON), NORMALIZED DRAIN-SOURCE ON-RESISTANCE VGS = 10V 4.5V 6.0V 40 4.0V 30 20 3.5V 10 1.8 1.6 4.0V 1.4 4.5V 5.0V 1.2 6.0V 10V 1 3.0V 0.8 0 0 1 2 3 VDS, DRAIN TO SOURCE VOLTAGE (V) 0 4 Figure 1. On-Region Characteristics 20 ID, DRAIN CURRENT (A) 30 40 Figure 2. On-Resistance Variation with Drain Current and Gate Voltage 1.8 0.06 ID = 5 A ID = 9.5A VGS = 10V 1.6 RDS(ON), ON-RESISTANCE (OHM) RDS(ON), NORMALIZED DRAIN-SOURCE ON-RESISTANCE 10 1.4 1.2 1 0.8 0.05 0.04 0.03 TA = 125oC 0.02 TA = 25oC 0.6 0.01 -50 -25 0 25 50 75 100 TJ, JUNCTION TEMPERATURE (oC) 125 150 2 Figure 3. On-Resistance Variation withTemperature 10 Figure 4. On-Resistance Variation with Gate-to-Source Voltage 60 100 VGS = 0V IS, REVERSE DRAIN CURRENT (A) VDS = 5V 50 ID, DRAIN CURRENT (A) 4 6 8 VGS, GATE TO SOURCE VOLTAGE (V) 40 30 20 o TA = 125 C 25oC 10 -55oC 10 TA = 125oC 1 25oC 0.1 -55oC 0.01 0.001 0.0001 0 1.5 2 2.5 3 3.5 4 4.5 VGS, GATE TO SOURCE VOLTAGE (V) 5 Figure 5. Transfer Characteristics 5.5 0 0.2 0.4 0.6 0.8 1 1.2 VSD, BODY DIODE FORWARD VOLTAGE (V) 1.4 Figure 6. Body Diode Forward Voltage Variation with Source Current and Temperature FDD6612A/FDU6612A Rev. 4.1 FDD6612A/FDU6612A Typical Characteristics 1000 f = 1 MHz VGS = 0 V ID = 9.5A VDS = 10V 20V 800 8 CAPACITANCE (pF) VGS, GATE-SOURCE VOLTAGE (V) 10 15V 6 4 Ciss 600 400 Coss 2 200 0 0 Crss 0 2 4 6 8 10 Qg, GATE CHARGE (nC) 12 0 14 Figure 7. Gate Charge Characteristics P(pk), PEAK TRANSIENT POWER (W) 100s 1ms 10ms 10 100ms 1s 10s 1 DC VGS = 10V SINGLE PULSE o RJA = 96 C/W TA = 25oC 0.01 0.01 0.1 1 10 VDS, DRAIN-SOURCE VOLTAGE (V) SINGLE PULSE o RJA = 96 C/W 40 TA = 25oC 30 20 10 0 0.001 100 Figure 9. Maximum Safe Operating Area r(t), NORMALIZED EFFECTIVE TRANSIENT THERMAL RESISTANCE 30 50 RDS(ON) LIMIT ID, DRAIN CURRENT (A) 10 15 20 25 VDS, DRAIN TO SOURCE VOLTAGE (V) Figure 8. Capacitance Characteristics 100 0.1 5 0.01 0.1 1 t1, TIME (sec) 10 100 Figure 10. Single Pulse Maximum Power Dissipation 1 D = 0.5 RJA(t) = r(t) * RJA 0.2 0.1 o RJA = 96 C/W 0.1 0.05 P(pk) 0.02 0.01 t1 t2 TJ - TA = P * RJA(t) Duty Cycle, D = t1 / t2 0.01 SINGLE PULSE 0.001 0.0001 0.001 0.01 0.1 1 10 100 1000 t1, TIME (sec) Figure 11. Transient Thermal Response Curve Thermal characterization performed using the conditions described in Note 1b. Transient thermal response will change depending on the circuit board design. FDD6612A/FDU6612A Rev. 4.1 ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor's product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. "Typical" parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor 19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com (c) Semiconductor Components Industries, LLC N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5817-1050 www.onsemi.com 1 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative www.onsemi.com