Document 172-1 SMT Power Inductors - DO5022P * Excellent current handling - up to 28.8 Asat. * Low dc resistance keeps power losses to a minimum Designer's Kit C311 contains 3 of each 20% tolerance part Core material Ferrite Core and winding loss See www.coilcraft.com/coreloss Terminations RoHS compliant electroplated gold (<50 in) over nickel over phos bronze. Other terminations available at additional cost. Weight 2.8 - 3.9 g Ambient temperature -40C to +85C with Irms current Maximum part temperature +125C (ambient + temp rise) Storage temperature Component: -40C to +125C. Tape and reel packaging: -40C to +80C Resistance to soldering heat Max three 40 second reflows at +260C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) 38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332 Packaging 250 per 13 reel Plastic tape: 32 mm wide, 0.38 mm thick, 24 mm pocket spacing, 7.8 mm pocket depth PCB washing Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. See Doc787_PCB_Washing.pdf. DCR L2 Percent max 1 3 Part number (H) tol (Ohms) DO5022P-102ML_ 1.0 DO5022P-222ML_ 2.2 DO5022P-332ML_ 3.3 DO5022P-562ML_ 5.6 DO5022P-822ML_ 8.2 DO5022P-103ML_ 10 DO5022P-153ML_ 15 DO5022P-223ML_ 22 DO5022P-333ML_ 33 DO5022P-473ML_ 47 DO5022P-683_L_ 68 DO5022P-104_L_ 100 DO5022P-154_L_ 150 DO5022P-224_L_ 220 DO5022P-334_L_ 330 DO5022P-474_L_ 470 DO5022P-684_L_ 680 DO5022P-105_L_ 1000 20 20 20 20 20 20 20 20 20 20 20,10 20,10 20,10 20,10 20,10 20,10 20,10 20,10 0.009 0.014 0.018 0.020 0.029 0.031 0.036 0.047 0.066 0.086 0.13 0.19 0.25 0.38 0.56 0.85 1.1 1.8 Isat (A)5 SRF typ4 10% 20% (MHz) drop drop 80 80 60 40 30 30 22 20 15 9 8 7 6 5 4 3 2.5 2.0 27.6 18.5 14.5 12.5 10.3 9.4 7.5 6.5 5.2 4.2 3.7 3.0 2.5 2.0 1.7 1.5 1.2 0.95 28.8 19.8 15.5 13.8 11.5 10.5 8.2 7.2 6.1 4.7 4.1 3.4 2.8 2.3 1.9 1.7 1.3 1.1 Irms6 (A) 8.6 7.1 6.2 5.3 4.8 4.3 4.0 3.5 3.0 2.6 2.3 1.8 1.5 1.2 1.0 0.82 0.72 0.56 1. Specify tolerance, termination and packaging codes: DO5022P-105MLD Tolerance: M = 20%, K = 10% (Table shows stock tolerances in bold.) Termination: L = RoHS compliant gold over nickel over phos bronze. Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37). Packaging: D = 13 machine-ready reel. EIA-481 embossed plastic tape (250 parts per full reel). B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter D instead. 2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc using an Agilent/HP 4263B LCR meter or equivalent. 3. Tolerances in bold are stocked for immediate shipment. 4. SRF >13 MHz measured using Agilent/HP 8753D network analyzer; <13 MHz using Agilent/HP 4192A. 5. DC current at which inductance drops the specified amount from its value without current. 6. Current that causes a 40C temperature rise from 25C ambient. 7. Electrical specifications at 25C. Refer to Doc 362 "Soldering Surface Mount Components" before soldering. US +1-847-639-6400 sales@coilcraft.com UK +44-1236-730595 sales@coilcraft-europe.com Taiwan +886-2-2264 3646 sales@coilcraft.com.tw China +86-21-6218 8074 sales@coilcraft.com.cn Singapore + 65-6484 8412 sales@coilcraft.com.sg Document 172-1 Revised 11/09/17 (c) Coilcraft Inc. 2017 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information. Document 172-2 SMT Power Inductors - DO5022P Series Typical L vs Current Typical L vs Frequency 10000 10000 1000 H 100 H 100 1000 H 1000 Inductance (H) Inductance (H) 1000 10 H 10 1 H 1 0.1 0.1 10 H 10 1 H 1 100 10 1 Current (A) 0.710 0.020 * 18,03 0,508 100 H 100 0.1 0.01 0.1 1 10 Document 172-2 Revised 11/09/17 Frequency (MHz) an additional 0.01/0,254 * Allow in length and 0.005/0,127 in height for optional tin-lead and tin-silver-copper application. 0.600 max 15,24 0.500 dia 12,70 0.280 max* 7,11 0.100 2,54 0.100 2,54 0.605 15,37 0.110 2,79 0.115 2,92 Recommended Land Pattern 0.498 0.010 12,65 0,25 Internal code XXX X Start Dash number Finish Part Marking Dimensions are in inches mm US +1-847-639-6400 sales@coilcraft.com UK +44-1236-730595 sales@coilcraft-europe.com Taiwan +886-2-2264 3646 sales@coilcraft.com.tw China +86-21-6218 8074 sales@coilcraft.com.cn Singapore + 65-6484 8412 sales@coilcraft.com.sg (c) Coilcraft Inc. 2017 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information. Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Coilcraft: DO5022P-105MLD DO5022P-102MLD DO5022P-562MLD DO5022P-222MLB DO5022P-562MLB DO5022P473MLD DO5022P-104MLD DO5022P-104MLB DO5022P-224MLB DO5022P-105MLB DO5022P-474MLB DO5022P-332MLB DO5022P-103MLB DO5022P-473MLB DO5022P-474MLD DO5022P-334MLB DO5022P822MLD DO5022P-684MLD DO5022P-683MLB DO5022P-223MLB DO5022P-153MLB DO5022P-333MLB DO5022P-332MLD DO5022P-822MLB DO5022P-154MLD DO5022P-684MLB DO5022P-103MLD DO5022P223MLD DO5022P-683MLD DO5022P-334MLD DO5022P-153MLD DO5022P-333MLD DO5022P-154MLB DO5022P-222MLD DO5022P-102MLB DO5022P-224MLD