© 2003 IXYS All rights reserved 1 - 1
IXYS reserves the right to change limits, test conditions and dimensions.
VUO 98
316
B3
Three Phase Rectifier Bridg e
in ECO-PAC 2 IdAV = 100 A
VRRM = 800-1600 V
VRSM VRRM Types
V V
900 800 VUO 98-08NO7
1300 1200 VUO 98-12NO7
1500 1400 VUO 98-14NO7
1700 1600 VUO 98-16NO7
Symbol Test Conditions Maximum Ratings
IdAV ①TC = 85°C; module 100 A
IFSM TVJ = 45°C; t = 10 ms (50 Hz), sine 750 A
VR = 0 t = 8.3 ms (60 Hz), sine 820 A
TVJ = TVJM t = 10 ms (50 Hz), sine 600 A
VR = 0 t = 8.3 ms (60 Hz), sine 700 A
I2tTVJ = 45°C t = 10 ms (50 Hz), sine 2800 A2s
VR = 0 t = 8.3 ms (60 Hz), sine 2820 A2s
TVJ = TVJM t = 10 ms (50 Hz), sine 2200 A2s
VR = 0 t = 8.3 ms (60 Hz), sine 2250 A2s
TVJ -40...+150 °C
TVJM 150 °C
Tstg -40...+125 °C
VISOL 50/60 Hz, RMS t = 1 min 2500 V~
IISOL ≤ 1 mA t = 1 s 3000 V~
MdMounting torque (M4) 1.5 - 2 Nm
14 - 18 lb.in.
Weight typ. 22 g
Symbol Test Conditions Characteristic Values
IRVR= V RRM;T
VJ = 25°C ≤0.5 mA
VR= V RRM;T
VJ = TVJM ≤5mA
VFIF= 150 A; TVJ = 25°C ≤1.6 V
VT0 For power-loss calculations only 0.8 V
rT6mΩ
RthJC per diode; DC current 1.2 K/W
per module 0.2 K/W
RthJH per diode, DC current (typ.) 1.5 K/W
per module (typ.) 0.25 K/W
dSCreeping distance on surface 11.2 mm
dACreepage distance in air 9.7 mm
aMax. allowable acceleration 50 m/s2
Features
• Package with DCB ceramic
base plate
• Isolation voltage 3000 V~
• Planar passivated chips
• Low forward voltage drop
• Leads suitable for PC board soldering
Applications
• Supplies for DC power equipment
• Input rectifiers for PWM inverter
• Battery DC power supplies
• Field supply for DC motors
Advantages
• Easy to mount with two screws
• Space and weight savings
• Improved temperature and power
cycling capability
• Small and light weight
Dimensions in mm (1 mm = 0.0394")
Data according to IEC 60747 refer to a single diode unless otherwise stated
①for resistive load at bridge output.
Preliminary data
PS16
EG 1
~ A 1
~ L 9
~ K10
Pin arangement see outlines
http://store.iiic.cc/
