CNY17
www.vishay.com Vishay Semiconductors
Rev. 2.1, 08-Jan-14 1Document Number: 83606
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Optocoupler, Phototransistor Output, with Base Connection
DESCRIPTION
The CNY17 is an optically coupled pair consisting of a
gallium arsenide infrared emitting diode optically coupled to
a silicon NPN phototransitor.
Signal information, including a DC level, can be transmitted
by the device while maintaining a high degree of electrical
isolation between input and output.
The CNY17 can be used to replace relays and transformers
in many digital interface applications, as well as analog
applications such as CRT modulation.
FEATURES
• Isolation test voltage: 5000 VRMS
• Long term stability
• Industry standard dual-in-line package
• Material categorization:
For definitions of compliance please see
www.vishay.com/doc?99912
AGENCY APPROVALS
Safety application model number covering all products in
this datasheet is CNY17. This model number should be used
when consulting safety agency documents.
• UL file no. E52744
• cUL tested to CSA 22.2 bulletin 5A
• DIN EN 60747-5-5 (VDE 0884-5)
• BSI IEC 60950, IEC 60065
• FIMKO EN60950
• CQC GB8898-2011
Note
(1) Also available in tubes, do not put T on the end.
ORDERING INFORMATION
CNY 1 7 - # X 0 # # T
PART NUMBER CTR
BIN
PACKAGE OPTION TAPE
AND
REEL
AGENCY CERTIFIED/PACKAGE CTR (%)
UL, cUL, BSI, FIMKO 40 to 80 63 to 125 100 to 200 160 to 320
DIP-6 CNY17-1 CNY17-2 CNY17-3 CNY17-4
DIP-6, 400 mil, option 6 CNY17-1X006 CNY17-2X006 CNY17-3X006 CNY17-4X006
SMD-6, option 7 CNY17-1X007T (1) CNY17-2X007T (1) CNY17-3X007T (1) CNY17-4X007T (1)
SMD-6, option 9 CNY17-1X009T (1) CNY17-2X009T (1) CNY17-3X009T (1) CNY17-4X009T (1)
VDE, UL, cUL, BSI, FIMKO 40 to 80 63 to 125 100 to 200 160 to 320
DIP-6 CNY17-1X001 CNY17-2X001 CNY17-3X001 CNY17-4X001
DIP-6, 400 mil, option 6 CNY17-1X016 CNY17-2X016 CNY17-3X016 CNY17-4X016
SMD-6, option 7 CNY17-1X017 CNY17-2X017T (1) CNY17-3X017T (1) CNY17-4X017T (1)
SMD-6, option 9 - CNY17-2X019T (1) --
7.62 mm 10.16 mm
> 8 mm 8 mm typ.
Option 7
Option 6
Option 9
DIP-6