Push Switches/ESB33 ESB33 Vertical Push Switches Type: ESB33 (H=6.0 mm) Features Low profile (H=6.0 mm) 3 N and 5 N operating force availables Recommended Applications Operation switches for automobiles (heater control switches etc.) Secondary power switches for lower voltage in consumer electronic equipment and different types of mode switches Explanation of Part Numbers 1 2 3 4 5 E S B 3 3 Product Code Type 6 7 8 Design No. Specifications Rating 50 A 3 Vdc to 0.2 A 14 Vdc (Resistive load) Travel Lock travel=1.5 mm Full travel=2.3 mm Mounting Height 6.0 mm Poles and Throws 2-poles 2-throws Operating Mode Self-lock, Non-lock Switching Mode Non-shorting Minimum Quantity/Packing Unit Quantity/Carton 100 pcs. Polyethylene Bag (Bulk) / 300 pcs. Embossed Taping (Reel Pack) 2000 pcs. Polyethylene Bag (Bulk) / 1800 pcs. Embossed Taping (Reel Pack) Standard Products Operating Mode Terminals Packaging Operating Force PP Wave Soldering Polyethylene Bag (Bulk) 3.0 N1.0 N Surface Mount Embossed Taping (Reel ) 3.0 N1.0 N NL PP NL Part Numbers Lever Color ESB33133 Light Yellow ESB33134 ESB33535 Light Yellow ESB33536 Note: PP=Self-lock NL=Non-lock Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 00 Oct. 2012 Push Switches/ESB33 Dimensions in mm (not to scale) No. 2 No. 1 N.C. 9.85 8.6 C N.C. N.C. 9.85 3 0. 12.5 (6.5) 6 1.50.1 1.0 .4 0 -R 24 1.0 2.5 +0 0 .1 .2 2.5 1 +0 0 .1 1. 7 N.C. C 8.7 N.O. Circuit diagram N.O. N.C. 2.5 .7 1 6-1.6 2.5 N.O. N.C. PWB mounting hole for reference (Tolerance: 0.05) View from terminal side N.C. C C 10.0 3 6-2.3 0. 7.75 7.75 10.0 1.0 1.0 12.5 C 1.50.1 0.3 1.0 3 0. 3.5 1.0 6.0 12.5 1.0 C 0.3 4.9 2.75 (6.5) 4.9 2.75 C C 3 0. 2.50.1 C 3.30.05 2.5 2.30.5 Full travel 3.90.2 N.C. N.O. N.O. C 2.30.5 Full travel N.O. C 1.50.3 Lock travel 8.6 N.O. ESB33536 2-poles 2-throws 1.50.3 Lock travel ESB33133 2-poles 2-throws C N.O. PWB mounting hole for reference Tolerance : 0.05 (t=1.6 mm) Circuit diagram Packaging Specifications Standard Reel Dimensions in mm (not to scale) Taping Reel 25.0 Cover tape TOP 21.50.5 P=200.1 Drawing direction 40.1 20.1 1.5+0.1 0.2 240.3 END Carrier tape 1.750.1 382.02.0 Embossed Carrier Taping Non-packed portion (160 mm min.) Packed portion Non-packed portion (100 mm min.) Leading portion 400 mm min. Application Notes: Operating force should be applied at the center of the lever. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 00 Oct. 2012