Click on Series name for product info on aimtec.com Series AM1L-FZ NRND; EOL by December 31st, 2017 For new designs, please see AM1LS-NZ series FEATURES: * Single & Dual Models * SMD Package * Low Ripple & Noise * High Efficiency up to 83% * * * * 1 Watt | DC-DC Converter Operating Temperature -40oC to +95oC Input / Output Isolation of 1000 & 3000VDC Pin Compatible with Multiple Manufacturers RoHS Compliant Models Single output Input Voltage (V) Output Voltage (V) Output Current max (mA) Isolation (VDC) Efficiency (%) AM1L-0303S-FZ AM1L-0305S-FZ AM1L-0309S-FZ AM1L-0312S-FZ AM1L-0315S-FZ AM1L-0503S-FZ AM1L-0505S-FZ AM1L-0509S-FZ AM1L-0512S-FZ AM1L-0515S-FZ AM1L-1203S-FZ AM1L-1205S-FZ AM1L-1209S-FZ AM1L-1212S-FZ AM1L-1215S-FZ AM1L-1503S-FZ AM1L-1505S-FZ AM1L-1509S-FZ AM1L-1512S-FZ AM1L-1515S-FZ AM1L-2403S-FZ AM1L-2405S-FZ AM1L-2409S-FZ AM1L-2412S-FZ AM1L-2415S-FZ 2.97-3.63 2.97-3.63 2.97-3.63 2.97-3.63 2.97-3.63 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 13.5-16.5 13.5-16.5 13.5-16.5 13.5-16.5 13.5-16.5 21.6-26.4 21.6-26.4 21.6-26.4 21.6-26.4 21.6-26.4 3.3 5 9 12 15 3.3 5 9 12 15 3.3 5 9 12 15 3.3 5 9 12 15 3.3 5 9 12 15 300 200 111 84 67 300 200 111 84 67 300 200 111 84 67 300 200 111 84 67 300 200 111 84 67 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 73 72 75 75 76 77 81 78 80 81 75 81 78 81 83 76 79 76 79 80 67 71 73 76 77 AM1L-0303SH30-FZ AM1L-0305SH30-FZ AM1L-0309SH30-FZ AM1L-0312SH30-FZ AM1L-0315SH30-FZ AM1L-0503SH30-FZ AM1L-0505SH30-FZ AM1L-0509SH30-FZ AM1L-0512SH30-FZ AM1L-0515SH30-FZ AM1L-1203SH30-FZ AM1L-1205SH30-FZ AM1L-1209SH30-FZ AM1L-1212SH30-FZ AM1L-1215SH30-FZ AM1L-1503SH30-FZ AM1L-1505SH30-FZ AM1L-1509SH30-FZ AM1L-1512SH30-FZ AM1L-1515SH30-FZ AM1L-2403SH30-FZ AM1L-2405SH30-FZ AM1L-2409SH30-FZ AM1L-2412SH30-FZ AM1L-2415SH30-FZ 2.97-3.63 2.97-3.63 2.97-3.63 2.97-3.63 2.97-3.63 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 13.5-16.5 13.5-16.5 13.5-16.5 13.5-16.5 13.5-16.5 21.6-26.4 21.6-26.4 21.6-26.4 21.6-26.4 21.6-26.4 3.3 5 9 12 15 3.3 5 9 12 15 3.3 5 9 12 15 3.3 5 9 12 15 3.3 5 9 12 15 300 200 111 84 67 300 200 111 84 67 300 200 111 84 67 300 200 111 84 67 300 200 111 84 67 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 77 81 78 80 81 77 81 78 80 81 75 81 78 81 83 76 79 76 79 80 67 71 73 76 77 Model www.aimtec.com F 051e R12.J Tel: +1 514 620 2722 1 of 5 Toll free: + 1 888 9 AIMTEC (924 6832) North America only NRND; EOL by December 31st, 2017 For new designs, please see AM1LS-NZ series Series AM1L-FZ 1 Watt | DC-DC Converter Models Dual output Model AM1L-0303D-FZ AM1L-0305D-FZ AM1L-0309D-FZ AM1L-0312D-FZ AM1L-0315D-FZ AM1L-0503D-FZ AM1L-0505D-FZ AM1L-0509D-FZ AM1L-0512D-FZ AM1L-0515D-FZ AM1L-1203D-FZ AM1L-1205D-FZ AM1L-1209D-FZ AM1L-1212D-FZ AM1L-1215D-FZ AM1L-1503D-FZ AM1L-1505D-FZ AM1L-1509D-FZ AM1L-1512D-FZ AM1L-1515D-FZ AM1L-2403D-FZ AM1L-2405D-FZ AM1L-2409D-FZ AM1L-2412D-FZ AM1L-2415D-FZ Input Voltage (V) Output Voltage (V) Output Current max (mA) Isolation (VDC) Efficiency (%) 2.97-3.63 2.97-3.63 2.97-3.63 2.97-3.63 2.97-3.63 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 13.5-16.5 13.5-16.5 13.5-16.5 13.5-16.5 13.5-16.5 21.6-26.4 21.6-26.4 21.6-26.4 21.6-26.4 21.6-26.4 3.3 5 9 12 15 3.3 5 9 12 15 3.3 5 9 12 15 3.3 5 9 12 15 3.3 5 9 12 15 150 100 56 42 34 150 100 56 42 34 150 100 56 42 34 150 100 56 42 34 150 100 56 42 34 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 68 70 74 76 74 74 71 78 78 81 72 73 79 81 83 72 76 76 78 78 66 76 78 80 75 AM1L-0303DH30-FZ 2.97-3.63 3.3 150 3000 68 AM1L-0305DH30-FZ 2.97-3.63 5 100 3000 70 AM1L-0309DH30-FZ 2.97-3.63 9 56 3000 74 AM1L-0312DH30-FZ 2.97-3.63 12 42 3000 76 AM1L-0315DH30-FZ 2.97-3.63 15 34 3000 74 AM1L-0503DH30-FZ 4.5-5.5 3.3 150 3000 74 AM1L-0505DH30-FZ 4.5-5.5 5 100 3000 71 AM1L-0509DH30-FZ 4.5-5.5 9 56 3000 78 AM1L-0512DH30-FZ 4.5-5.5 12 42 3000 78 AM1L-0515DH30-FZ 4.5-5.5 15 34 3000 81 AM1L-1203DH30-FZ 10.8-13.2 3.3 150 3000 72 AM1L-1205DH30-FZ 10.8-13.2 5 100 3000 73 AM1L-1209DH30-FZ 10.8-13.2 9 56 3000 79 AM1L-1212DH30-FZ 10.8-13.2 12 42 3000 81 AM1L-1215DH30-FZ 10.8-13.2 15 34 3000 83 AM1L-1503DH30-FZ 13.5-16.5 3.3 150 3000 72 AM1L-1505DH30-FZ 13.5-16.5 5 100 3000 76 AM1L-1509DH30-FZ 13.5-16.5 9 56 3000 76 AM1L-1512DH30-FZ 13.5-16.5 12 42 3000 78 AM1L-1515DH30-FZ 13.5-16.5 15 34 3000 78 AM1L-2403DH30-FZ 21.6-26.4 3.3 150 3000 66 AM1L-2405DH30-FZ 21.6-26.4 5 100 3000 76 AM1L-2409DH30-FZ 21.6-26.4 9 56 3000 78 AM1L-2412DH30-FZ 21.6-26.4 12 42 3000 80 AM1L-2415DH30-FZ 21.6-26.4 15 34 3000 75 NOTE 1: Add suffix "TR" to a part number when ordering in tape and reel package NOTE 2: All specifications in this datasheet are measured at an ambient temperature of 25C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. www.aimtec.com F 051e R12.J Tel: +1 514 620 2722 2 of 5 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM1L-FZ NRND; EOL by December 31st, 2017 1 Watt | DC-DC Converter For new designs, please see AM1LS-NZ series Input Specifications Parameters Nominal 3.3 5 12 24 Voltage Range Filter Start Up Time Absolute Maximum Rating Typical Maximum Units 3.0-3.6 4.5-5.5 10.8-13.2 21.6-26.4 Capacitor 3.3V input models 5V input models 12V input models 24V input models No Load Input Current 15 VDC ms VDC -0.7 to 5 -0.7 to 7.5 -0.7 to 15 -0.7 to 30 28 mA Isolation Specifications Parameters Tested I/O Voltage Resistance Capacitance Conditions 60sec 500VDC 3.3V input model 5V input model 12V input model 24V input model Typical Rated Units 1000,3000 VDC MOhm pF 1000 16 14/15(minimum 8) 18(minimum 6/7) 20(minimum 8) Output Specifications Parameters Voltage Accuracy Voltage Balance (Dual Output Models) Cross Regulation (Dual Output Models) Short Circuit Protection Line Voltage Regulation Load Voltage Regulation (Single) Load Voltage Regulation (Dual) Temperature Coefficient Ripple & Noise Conditions Typical Maximum Units 3 1 5 % % % 1.2 12 % % 12 % 0.02 %/oC mV p-p Nominal input 1 Balanced Load 25% load on one output - 100% load on second load Max 1 second Per 1% of Vin Change Output current change from 20% to 100% 8 max load Output current change from 20% to 100% 9 max load Nominal Input 0.01 20MHz Bandwidth 100 General Specifications Parameters Switching Frequency Operating Temperature Storage Temperature Maximum Case Temperature Derating Cooling Humidity Case Material Weight Dimensions (L x W x H) MTBF Maximum Soldering Temperature www.aimtec.com F 051e R12.J Conditions Typical Maximum Units 100% load 100(Min 70KHz) -40 to +95 -55 to +125 150 KHz oC oC oC 100 No derating up to +95 oC Free Air Convection 90 % RH Plastic (UL94-V0) 1.6/2.1 g 1KVdc isolation single output models: 0.54 x 0.45 x 0.31 inches 13.60 x 11.40 x 7.85 mm All other models :0.60 x 0.44 x 0.30 inches 15.20 x 11.40 x 7.60 mm 3000k hours oC 300 (1.5mm from case for 10 seconds) Tel: +1 514 620 2722 3 of 5 Toll free: + 1 888 9 AIMTEC (924 6832) North America only NRND; EOL by December 31st, 2017 For new designs, please see AM1LS-NZ series Series AM1L-FZ 1 Watt | DC-DC Converter Pin Out Specifications Pin 1000VDC Single 1 2 3 4 5 6 7 8 -V Input +V Input No Pin -V Output +V Output No Pin No Pin N.C Pin 1 2 3 4 5 6 7 8 9 10 1000VDC Dual Single 3000VDC Dual -V Input +V Input No Pin Common -V Output No Pin +V Output No Pin No Pin N.C. -V Input +V Input No Pin -V Output N.C. No Pin +V Output No Pin No Pin N.C. -V Input +V Input No Pin Common -V Output No Pin +V Output No Pin No Pin N.C. Dimensions Single 1000Vdc Isolation Front View 8.15 (0.32) Side View 5.90 (0.23) 1.70 (0.07) 0.25 (0.01) 7.85 (0.31) 0~10 angle 1.50 (0.06) Top View 13.60 (0.54) 7.62 (0.30) 11.40 8.40 (0.45) (0.33) 1 2.54 (0.10) www.aimtec.com F 051e R12.J 0.60 (0.02) Tel: +1 514 620 2722 4 of 5 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM1L-FZ NRND; EOL by December 31st, 2017 For new designs, please see AM1LS-NZ series 1 Watt | DC-DC Converter All other models Front View 8.15 (0.32) Side View 5.90 (0.23) 7.60 (0.30) 1.70 (0.07) 0.25 (0.01) 0~10 angle 1.50 (0.06) Top View 15.20 (0.60) 7.62 (0.30) 11.40 8.40 (0.44) (0.33) 1 2.54 (0.10) 0.60 (0.03) NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. 5. Aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec's standard Terms of Sale available at www.aimtec.com. www.aimtec.com F 051e R12.J Tel: +1 514 620 2722 5 of 5 Toll free: + 1 888 9 AIMTEC (924 6832) North America only