Data sheet
TERMSERIES
TOS 24VDC 24VDC5A
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
Technical data
Creation date May 27, 2019 3:05:42 PM CEST
Catalogue status 23.05.2019 / We reserve the right to make technical changes. 3
General data
Rail TS 35 Colour black
UL 94 flammability rating V-0
Insulation coordination
Rated voltage 300 V Pollution severity 2
Surge voltage category
III
Clearance and creepage distances for
control side - load side ≥ 5.5 mm
Dielectric strength for control side - load
side 2.5 kVeff
Dielectric strength to mounting rail
4 kVeff / 1 Min.
Impulse withstand voltage 6 kV (1.2/50 µs) Protection degree IP20
Further details of approvals / standards
Standards DIN EN 50178 Certificate no. (cULus) E141197
Connection data
Wire connection method Screw connection Stripping length, rated connection 8 mm
Tightening torque, max. 0.4 Nm Clamping range, rated connection 1.5 mm²
Clamping range, min. 0.14 mm² Clamping range, max. 2.5 mm²
Wire connection cross section AWG,
min. AWG 26
Wire connection cross section AWG,
max. AWG 14
Wire cross-section, solid, min. 0.14 mm² Wire cross-section, solid, max. 2.5 mm²
Wire connection cross-section, finely
stranded, min. 0.14 mm²
Wire connection cross section, finely
stranded, max. 2.5 mm²
Wire cross-section, finely stranded, min.
(AWG) AWG 26
Wire cross-section, finely stranded, max.
(AWG) AWG 14
Wire connection cross-section, finely
stranded with wire-end ferrules DIN
46228/4, min. 0.25 mm²
Wire connection cross-section, finely
stranded with wire-end ferrules DIN
46228/4, max. 2.5 mm²
Conductor cross-section, flexible, AEH
(DIN 46228-1), min. 0.25 mm²
Conductor cross-section, flexible, AEH
(DIN 46228-1), max. 2.5 mm²
Wire connection cross section, finely
stranded, two clampable wires, min. 0.5 mm²
Wire cross-section, finely stranded, two
clampable wires, max. 1 mm²
Twin wire-end ferrules, min. 0.5 mm² Twin wire-end ferrules, max. 1 mm²
Blade size size PH0 Gauge to IEC 60947-1 A1, B1
Classifications
ETIM 5.0 EC001504 ETIM 6.0 EC001504
eClass 6.2 27-37-16-04 eClass 7.1 27-37-16-04
eClass 8.1 27-37-16-04 eClass 9.0 27-37-16-04
eClass 9.1 27-37-16-04
Approvals
Approvals
ROHS Conform